Product Description
FEATURESliHighly efficient and accurate due to its advanced microprocessor technology. liDisplays TDS levels of the Feed Water and Product Water with in & out electrode probes. liAuto-Off function conserves battery power. The unit shuts off automatically after 20 seconds. liDual Range - Measures from 0-999 PPM, with a resolution of 1 PPM. From 1000 to 9990 PPM, the resolution is in 10 PPM increments, indicated by a blinking 'x10' image. liFactory Calibrated: our meters are calibrated with a 342 PPM NaCl solution. Meters can be recalibrated with a mini-screwdriver. liComes equipped with 1/4 inch John Guest Quick-Connect T-fittings as shown. Also available with 3/8" fittings. liInstalls quickly and easily. Differences from the DM-1: liDesigned for commercial/industrial applications. liStronger, water-resistant casing. liCalibration can be done individually or simultaneously on each line. liImproved design, including an extra large, easy-to-read LCD display. liLonger, waterproof, shielded cables. liVariable mounting bracket. Measure the tap water coming in vs. the purified water going out of your system at any time.Use the meter to determine when the filters need to be changed.Install the meter for your customers so they'll always know how their system is performing.Install on industrial systems such as car washes, manufacturing, and food processing.SPECIFICATIONSliRange: 0-9990 ppm liAccuracy: liCable Length: 46" (including sensor) liCalibration: Factory calibrated to NaCl 342 ppm. Re-calibration can be done separately for each line, or simultaneously for both. liPower source: 2 AAA batteries (included) liBattery life: over 1000 hours of continuous use liSize: 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.) liWeight: 201.3 g (7.1 oz.)
FEATURES
Highly efficient and accurate due to its advanced microprocessor technology. Displays TDS levels of the Feed Water and Product Water with in & out electrode probes. Auto-Off function conserves batter