Linksys Dual-Band Wireless-N Gaming Adapter

Other products by Linksys

Product Details

• Product Dimensions: 4.3 x 1.3 inches ; 1.3 pounds
• Shipping Weight: 2 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B0010TEOLQ
• Item model number: WGA600N
• Average Customer Review: 4.2 out of 5 stars  See all reviews (146 customer reviews)
• Amazon.com Sales Rank: #381 in Electronics (See Bestsellers in Electronics)
• Date first available at Amazon.com: December 5, 2007

Product Description

Product Description

The Dual-Band Wireless-N Gaming Adapter gives wireless connection capabilities to any wired Ethernet-equipped game console. The Game Adapter can be used in several different ways. If you have an existing home wireless network and a cable or DSL Internet connection, the Game Adapter lets your Xbox, Xbox 360, PlayStation2 or 3, or GameCube attach to the network so you can get into online games without running wires to the game room. Or, use a pair of Game Adapters to form a "cable-less cable" between two game consoles for head-to-head gaming -- in the same room, or all the way across the house. There is also a special "Wireless LAN Party" mode to connect several consoles at once.

Customer Reviews

Most Helpful Customer Reviews

110 of 113 people found the following review helpful:

4.0 out of 5 stars Advanced configuration directions, May 6, 2008

By	Rak (Denver, CO) - See all my reviews

I have this product connected to my directv hd receiver to download VOD content. If the installation software is not able to detect the device during the installation process, then follow these steps (I had to perform these steps when I called Linksys for assistance. I wish they had just documented the steps instead):

1. Quit out of the installation software (keep the adapter connected to your pc)

2. Assign a static IP to your pc (if you do not know how to do this, then call Linksys or google it). The static ip settings should be:
ip: 192.168.1.50
subnet: 255.255.255.0
gateway: 192.168.1.1
leave dns settings as is

3. Open up your browser and type http://192.168.1.250 in the address bar. You will now see a log in page

4. Log in with admin/admin

5. Now assign a static IP to the adapter
ip: 192.168.1.250
subnet: 255.255.255.0
gateway: 192.168.1.1

6. Now go to the wireless settings tab and enter in your SSID and WEP/WPA Key. Make sure you select the correct authentication type

7. You will now need to reboot the adapter (it will ask you to do so)

8. Once the device is back up, go back to the http://192.168.1.250 page and log back in. Double-check to make sure your settings were entered in correctly. The wireless light should light up on your adapter.

Tip: Before you connect it to your console/receiver, you can test to make sure the adapter can connect to the internet. Switch off your wireless connection on your pc/laptop and connect the adapter to your pc via the ethernet port. Try accessing the internet and if you can, then the adapter is all set.

Good luck.
p.s. the main reason I detailed out the steps for the "advanced setup" is so that people know that it is still a straight-forward process, so no need to be afraid if you won't have the plug-and-play experience.

another tip. if you are still having issues, then try changing the channel on your router (although you should not have to if all your other wireless devices are working well on that channel).

27 of 27 people found the following review helpful:

4.0 out of 5 stars Good for streaming HD content, June 22, 2008

By	Parry "laptop freak" (MI, USA) - See all my reviews

First - the product is a bit hard to configure if you do not have a compatible Linksys N router. The CDROM that comes with the WGA600N can only configure it if you have a compatible Linksys router. I have a Apple Airport Extreme N router and had to spend a little time googling to discover that the Reset button on the WGA600N puts it on 192.168.1.250 IP address and that I had to enable static IP in the same subnet on my desktop's interface in order to be able to go to the Web GUI at http://192.168.1.250. After that, it was a breeze to setup. Very easy.

That aside, the best part about WGA600N is that it is very good for streaming HD content over your network. I have Slingbox hooked up to my HD enabled Comcast DVR to enable streaming to my desktop in the other room. The desktop has no wireless card and so it was wired to a NetGear Powerline HDX101. With this setup the HDTV streaming with Slingbox was not impressive - frequent lost packets, not so good speed etc.

But once I hooked the desktop to the WGA600N and had it connect to my extreme N router (Airport shows it connects at 300 rates, whereas my Laptop with WirelessN card connects at 130) no more lost packets, and I get the best streaming speeds, consistently (hovering around 5500Kbps to 6000Kbps).

Overall I am quite happy with its performance - Linksys should fix the configuration utility though, that will save people without Linksys routers some headache for sure.

22 of 22 people found the following review helpful:

5.0 out of 5 stars Great alternative for XBOX 360 wireless, April 12, 2008

By	G. Bovara (Chandler, AZ USA) - See all my reviews (REAL NAME)

Amazon Verified Purchase

I was able to set this adapter up easily and quickly with no issues whatsoever. It works perfectly with my XBOX 360 and is much much faster than the XBOX brand wireless G adapter. I am using WPA2 (TKIP and AES) mode on my router and everything is running smoothly with no connection issues. A great product.