Leviton 612-6260M-00W Decora 60-30-20-10 Preset Minute Electronic Timer, White

Other products by Leviton

Product Description

From the Manufacturer

The Leviton white Decora plus electronic timer switch with matching Decora wallplate comes with four preset interval buttons: 60, 30, 20, 10 minutes and off. A 3-Wire, single-pole (neutral required), 1000W Incandescent, 20A Inductive 1HP at 120V, and is compatible with electronic ballast. Timer switch is ideal for a wide variety of commercial and residential applications including outdoor lighting, motors, exhaust and attic fans, bathroom heat lamps, hot tubs, spas, whole-house exhaust fans, office lights, janitor closets, landscape and security lighting. LED's indicate elapsed time and flash "two minutes until off" warning. Decora styling enhances interiors and can be used with Decora screw-less plates, and plastic or nylon Decora plates. Testing and code compliance: UL Listed, CSA Certified, backed by 2-year limited warranty.

Product Description

Tired of seeing lights left on in un-occupied rooms? Fan in the bathroom always left running? These countdown timer switches, sometimes called a "timed lag switch" can relieve that frustration, and save you money! Offers timed increments of 10-20-30-60 minutes. These stylish timer switches ensure that you do not leave lights and appliances on longer than necessary. Press the timer button you need and the LED next to the selected button lights up. As the time counts down, the lit LED moves down until at 2 minutes before shut-off the LED flashes to indicate impending shut-off. The button at the bottom is a manual OFF button. Use it in areas where lights normally only need to be on for a short time, like bathrooms, laundry room, garage, kitchen, mud room, or in any other place where you often find uneeded lights left on! Also can be used on non-lighting loads, like exhaust fans, attic fans, bathroom heaters, jaccuzzi, hot tubs, pool motors, sprinklers, and more! All install easily into a regular single or multi gang wall box in place of a standard switch. Now includes a matching screw-in trim plate.

Product Details

• Product Dimensions: 4.2 x 2.8 x 2.2 inches ; 1 pounds
• Shipping Weight: 6.4 ounces (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
• ASIN: B00004YUMM
• California residents: Click here for Proposition 65 warning.
• Item model number: 612-6260M-00W
• Average Customer Review: 4.6 out of 5 stars  See all reviews (32 customer reviews)
• Amazon.com Sales Rank: #330 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in these categories: (What's this?)

  #7 in	Home Improvement > Electrical > Switches, Outlets & Wall Plates > Timers
  #7 in	Home Improvement > Lighting & Electrical > Indoor Lighting > Lighting Accessories > Timers

Customer Reviews

Most Helpful Customer Reviews

8 of 9 people found the following review helpful:

4.0 out of 5 stars Good product - read if you are not an electrician, February 17, 2009

By	C. Carter - See all my reviews (REAL NAME)

Amazon Verified Purchase

This is a nice product that works well and is easy to install IF you know a few things up front.

I installed three of the timers. The first one took 45 minutes, the second 15 minutes, and the third 5 minutes. This is not the products fault other than it could have a little better directions. I am not an electrician but I do some easy handyman tasks around the house like putting in these switches. So for the non-electricians here are a couple of tips that might save you some time - most of these have a DUH! factor but I am listing them just in case.

My installation was for three bathroom exhaust fans in a one year old house. Two were two switch, one was a three switch.

Things to note:

1) A couple of other reviews mention that this product MUST have a third wire to work - this is true. None of my existing switches use this third wire so I thought I was out of luck until I looked closer. There were some white (cream) colored wires in the switch box which were indeed the third wire. These white wires were stubbed and all I had to do was take off the twist connector, attach the timer's third wire, and put the connector back on.

2) The timer comes with an extra wide metal facing that I am sure is needed for some usages, but when putting on a wall switch the extra metal can be removed for easier installation. Using pliers you can bend the extra metal off at the grooves that the product comes with. I took off the extra metal on both sides to get it down to the size of a wide on/off switch. It takes 30 seconds to remove the extra metal.

3) Be sure to turn of the electricity. I have done things like this without doing so, but for this you really need to because the timer has external wires to connect rather than having posts on the timer to attach the wires. The is not a big deal, but the switch box gets VERY full and if you want a neat installation you will want to position the wires before cramming the timer back in. When moving around this much wire inside of a box, it is important to turn off the juice.

4) I ended up taking out the other switch (leaving on the wires, I just unscrewed it from the box) to make getting to the third wire easier and to allow for a neater installation.

Once I did the above (see what I mean about the DUH factor) I was able to do the third timer in 5 minutes.

Overall timer seems like a quality product that works well.

8 of 9 people found the following review helpful:

1.0 out of 5 stars flimsy buttons break within a year, July 5, 2008

By	Holly Taylor "moshimoshi" (dismal swamp, NJ United States) - See all my reviews

Looks good, works great until the tiny plastic tabs on the back of the buttons that hold them to the switch receptacle start to break off. This is with once or twice daily use, not an unusual load.

Using tiny plastic bits as functional parts that take stress is a bad design idea.

Too bad, because i was really happy with this product.

5 of 5 people found the following review helpful:

5.0 out of 5 stars Great energy savings device for the master bathroom, January 1, 2007

By	Martin Anderson "Martin" (Santa Ana, CA United States) - See all my reviews (TOP 1000 REVIEWER)    (REAL NAME)

I often find that my wife and I turn on the master bathroom fan and lihts, but we forget to come back and turn them off.

This timer is a perfect solution to both problems. It replaces a regular wall switch and gives you five buttons: 60 minutes, 30 minutes, 20, and 10 minutes, and off. After the appropriate period, the switch turns off automatically.

In an effort to save energy, I've replaced the light switches in all my bathrooms and in the garage with these.

The only downside is a very slight clicking noise when you turn the switch on or off, as the relay kicks in. The noise isn't annoying, but you should know about it before you buy.