Your rating(Clear)Rate this item


There was a problem filtering reviews right now. Please try again later.

6 of 6 people found the following review helpful
on February 1, 2014
Had to prime... not unusual lift heights are from 8-1/4'' to 16-5/16''.
I purchased another Jack like it, not the same brand, I have had nothing but problems with it.
This Powerbuilt 647501 Heavy Duty 12- Ton Bottle Jack actually deserves a better review than my original one.
After priming It has out lifted 3 jacks, one of my other ones the handle broke on it after about a month.
In the future I will be purchasing another Powerbuilt Jack from the same seller, they got to my door on time, and at a much better price than others.
Dont ever trust ANY hydraulic jack alone... please use jack stands.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
6 of 6 people found the following review helpful
on July 10, 2014
I love this jack. RVs today do not come with Jacks of anykind. i bought this is set deep inside storage compartment and save for a rainy day. I was tired of waiting for hours for a tow truck to change my tire. First time out, I had loose lugnuts on my passenger side (Last roadside repair professional forgot to tighten) and then 8 miles later blew my leftside tire. This jack lifted my 29ft class C with ease.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
5 of 5 people found the following review helpful
on December 16, 2014
Just received it today 12/16/14 and one of the reasons a went with this jack is because of the case, and guess what? the case is broken and don't have time to return it since I'm getting ready to go on a trip and it's for my trailer, the case should be more sturdy. See picture.
review image
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
4 of 4 people found the following review helpful
on August 11, 2013
I needed a 6" tall bottle jack to replace the one in my 'ultimate mx jack'. This one fit perfectly & was 1/3 the overall cost ( from the 'ultimate mx jack' company). I had no real problems. The unit had some air lodged in in from shipping, but a brief look at the instructions and everything was resolved in 2 minutes. Works great and was inexpensive.
Added 9/15/14- This jack has performed well for over a year and shows no sign of problems. It is used at least twice a month.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
4 of 4 people found the following review helpful
on December 2, 2011
I needed to raise the floor above a doorway in the basement, but only had an opening of about 6 inches to fit a jack. This small jack fit the space and raised the floor joist about an inch.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
3 of 3 people found the following review helpful
on December 30, 2011
This is a generic Chinese-made bottle jack, which I have so far used to lift the corner of a modest size porch during the course of repairs.

The good: action is fairly smooth, lifts several hundred pounds without complication. No leak of pump oil on first uses and no air purge needed.

The not so good: breathtakingly bad finish gives little confidence in long term prospects for this jack. Most likely, a load of these sat in a wet warehouse before painting. The incredibly grainy base and small to moderate amount of rust that fell out of the pump handle yolk when I inverted the jack don't do anything to dispel this idea. Also, the pressure relief valve was solidly painted shut in position, but could be broken loose with a little effort and now moves fairly easily. The piston shaft, at least, looks reasonably well polished.

Bottom line: you get what you pay for.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
4 of 4 people found the following review helpful
on March 13, 2012
These bottle jacks work well. I notice one slowly leaks down even when it is tightened. This may improve with usage.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
3 of 3 people found the following review helpful
on September 5, 2012
I bought mine to help with lifting up a <2000 pound trailer - and it does a great job. I does EXACTLY what it was tasked to do.

My one gripe is the paint job. It reminds me of the overly painted fire extinguishers from the 1960s.... they spray painted the whole thing shut... so the first use involved BREAKING the heavy coat of paint so that you can turn the bleed valve. It took me a few times using it until I could unscrew the top to use the extra extension.

Lifts, is strong, and is a good jack. Just wish they would spray paint the moveable parts separately and assemble, rather than spray the entire object shut.
22 commentsWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
2 of 2 people found the following review helpful
on June 17, 2012
I purchased this item, even after seeing a cheaper model at Walmart, because my Amazon usually doesn't sell junk. I was very disappointed in the quality of this product. There was paint over rusted metal (witch flaked off easily), the main pin on the pump was falling out, and the pin for the release valve moved very freely, making it difficult to use.

Do not buy this jack, Walmart carries a cheaper and better one.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
2 of 2 people found the following review helpful
on February 10, 2014
It doesn't have enough height to lift it from the front jack point for the tires to get clearance, but I used the frame a few inches behind the jack support points and got plenty of height for the tires to clear the ground, even after lowering back down onto jack stands (which I placed under the jack support points). Allowed me to replace both my front brake pads and rotors with no problem.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Questions? Get fast answers from reviewers

Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
See 1 answered question

Send us feedback

How can we make Amazon Customer Reviews better for you?
Let us know here.