BébéSounds Angelcare Movement Sensor w. Sound Monitor w. Two Parents' Units

Parents of preemies and infants at increased risk of SIDS lose a lot of sleep wondering if their babies are still breathing. Even parents of healthy babies experience this kind of anxiety. With its movement sensor pad, sound transmitter, sound lights, and movement detecting "ticking" sound, The Angelcare Movement Sensor with Sound Monitor can take away virtually all this anxiety.

Three Functions, Infinite Peace of Mind
The Angelcare Movement Sensor has three modes of use, enabling parents to use the sensor/sound monitor well into toddlerhood and beyond, if desired. With the Sound & Movement function, you can hear your baby’s sounds, see sound lights, and hear a "tic" sound with every movement the baby makes. If no movement is detected, the "tic" will stop and after 20 seconds the alarm will sound. In the Tic Off mode you will not hear the ticking sound with every movement. However, you will still hear the baby’s sounds and see sound lights, and your baby’s movement is still being detected. An alarm will still sound if absolutely no movement is detected for 20 seconds. And finally, with Sound Only, the movement sensor is disabled, but you will still be able to hear your baby’s sounds and see sound lights. In this mode, the Angelcare functions as a regular sound monitor. For many parents, just being able to hear the sighs and squeaks of the newest member of the family is reassurance enough. For those who need more input, for whatever reason, the additional sensory features of the Angelcare can be lifesaving.

How the Angelcare Movement Sensor Works
A sensor pad is placed under the center of baby’s crib mattress on a flat, hard surface. The sensor pad cord passes underneath the mattress entirely, exiting the crib in the corner. It is then plugged into the jack of the nursery unit transmitter. The nursery unit can be plugged into an electrical outlet or it can operate with four AAA batteries. The same goes for the parents’ unit receivers (two parents’ units included). Turn the parents’ units on by selecting either channel A or B. Make sure they’re set to the same channel as the nursery unit. Set the nursery unit to the desired mode (Sound & Movement, Tic Off, or Sound Only). You may leave one parents’ unit in your bedroom and carry the other with you as you move about the house and yard. Now, depending on the function you’ve selected, you’ll be able to keep track of your baby’s every sound and movement.

Sound Lights
Indicator lights on an LED sound bar (on the parents’ unit) allow you to "see" your baby’s sounds if background noises prevent you from hearing baby. As baby’s sounds get louder, more lights illuminate.

Optional "Tic" Feature
When the nursery unit is set to Sound & Movement, it will continuously tick with every movement your baby makes. If no movement is detected by the sensor pad beneath baby’s mattress, the ticking will stop.

Movement Indicator Light
The movement indicator light is located only on the nursery unit. When the nursery unit is set to Sound & Movement or Tic Off, the movement indicator light will flash green with baby’s every movement. The flashing green light will let you know that movement is being detected, which will allow you to check on a sleeping baby in the dark.

False Alarms
False alarms are possible with the Angelcare Movement Sensor, especially if instructions have not been followed to a "t". Make sure to turn off the nursery unit after you’ve taken baby out of the crib. Also, once baby starts being more mobile, she may roll right off the sensor pad area of the mattress. A troubleshooting guide in the instruction manual gives other solutions to false alarms.

What’s in the Box
Angelcare Movement Sensor includes movement sensor pad, nursery sound monitor, two parents’ units, instruction manual, and three AC adapters. Twelve AAA batteries are required (not included).--Emilie Coulter