- Machine Screws are often used with nuts or driven into tapped holes
- Stainless Steel 316 is suitable for use where Stainless Steel 304 does not provide enough corrosion resistance
- Flat head style allows fastener to sit flush to the surface
- Phillips drive is designed to cam out under too much torque
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
|
||||||||||
|
||||||||||
|
||||||||||
Product Features |
Product Details
Would you like to give feedback on images?
|
| Brand Name |
Small Parts
|
| Part Number |
XFHP-0632-04-25
|
| Item Package Quantity |
25
|
| Material Type |
Stainless Steel 316
|
| Exterior Finish |
Plain
|
| System of Measurement |
English
|
| Color Name |
Silver
|
| Thread Style |
Coarse
|
| Overall Length |
1/4
inches |
| Size Name |
#6-32
|
| Drive Style |
Phillips
|
| Head Style |
Flat
|
| Self Locking Mechanism |
None
|
Product Description
Product Description
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.
Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).
Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).
Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.
Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).
Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).
Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.
Product Information from the Amapedia Community
Beta (What's this?)Be the first person to add an article about this item at Amapedia.com.
› See featured Amapedia.com articles
Tag this product(What's this?)Think of a tag as a keyword or label you consider is strongly related to this product.
Tags will help all customers organize and find favorite items. |
Customer Reviews
|
There are no customer reviews yet.
|
|||
|
Video reviews
|
 |
Customer Discussions
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|
Listmania!
So You'd Like to...
Look for Similar Items by Category
Your Recent History
(What's this?)|
After viewing product detail pages or search results, look here to find an easy way to navigate back to pages you are interested in. |
