Most Helpful Customer Reviews
|
|
6 of 6 people found the following review helpful:
5.0 out of 5 stars
These Autoloaders are very handy to keep in a drawer!, September 17, 2009
I really like both of these screwdrivers. They each have 3 phillips bits and 3 flat bits. They seem to be well made. I purchased this kit in the hopes to replace the separate individual screwdrivers in my tool belt. However I don't think they are sturdy enough for full time construction use.
I wish the handles were of a rubber type or coating to give a better grip. I do like the fact that the bits are held in magnetically and can be changed out. My flat blade screwdriver sometimes serves double duty to pry and chisel things and I wouldn't attempt it with either one of these.
They are made of metal and plastic with the internal mechanism filled and sealed with a white grease. The upper housing is clear and you can see the bits thru it although I wonder how long it will remain transparent with wear and tear and scratches. I keep mine in a drawer near the kitchen for around the house use. They are neat. I am going to try putting other type bits in them since I also use some other type bits around the house like allen and torx.
I am happy with the purchase.
|
|
|
4 of 4 people found the following review helpful:
3.0 out of 5 stars
Handy and clever; the small one is much more useful to me, September 23, 2009
Okay, I do like the little one, which has a lot of tips that can be hard to find. The larger one is less handy as I have more screwdrivers that size. Also, for a small screwdriver, the sturdiness of the small one is fine. The big one doesn't have a good grip for a tool that size and the tips just don't seem to be very high quality. I'm also not impressed that the labels fell off immediately. Not that they're serving any function, but it just screamed cheesy right out of the packaging.
I have multi-tools kicking around the house, including multi-tip screwdrivers with the more standard four tips that you can flip around, and have found them very handy. I like the standard four-tip screwdrivers better than the large screwdriver here. Which means that I don't find the two extra tips to be a major selling point and the other screwdrivers are sturdier and have a better grip.
I don't like that the tips can pop off the end relatively easily. (Especially for the small screwdriver.)
I do think it's an enormously clever gadget. It's just not great.
DON'T TAKE IT APART.
I made this mistake messing around with the big one because it seemed so easy to do, just push those black buttons. I thought I was going to uncover another feature or something. No such luck.
But if you do take it apart, all is not lost; you can actually put it back together:
1. Take all the tips out... you'll put these back in at the end (this was the part that most confused me)
2. You have four other pieces now:
... a. the clear cannister
... b. the black handle
... c. the black inner piece
... d. the little blue button (pop it out for now)
Note that the little blue button (d) goes into a particular place in the black inner piece (c). But do not put it there yet.
3. Take the black handle (b), notch and button-side up, and feed it into the black inner piece so that the place where the blue button will go is on top
4. Now put the blue button back
5. Note that on the black inner piece (c), there's a rotating ring that has the black buttons you pushed to get into this mess. Rotate the ring so that the opening is roughly aligned with the blue button.
6. Put the clear cannister back on so that the blue button is aligned with the tracks and the black buttons will find the holes they are meant to find.
7. Close it all back up. (Yes, you have no tips yet.)
8. Put in a tip. Retract the handle. Rotate. Close it all back up. Repeat till all the tips are in.
9. Don't take it apart again.
|
|
|
4 of 4 people found the following review helpful:
5.0 out of 5 stars
very handy around the house, March 8, 2009
This screwdriver is unique in that the bits are always sealed inside... they're selected through an automatic process (pull the handle, turn to select the bit, push the handle back) that doesn't require the device to be opened, so the bits don't get lost.
We loved it. So did a repair crew that did some work for us and helped themselves to the driver. We've been looking everywhere for a replacement, and this two-pack is perfect: one for us, one for the next repair crew!
Incidentally, this is best used for household chores. It's durable enough to stand up to normal household use, but not abuse. In addition, the handle is bulky and relatively short, which gets in the way during more challenging tasks.
|
|
|
Most Recent Customer Reviews
|
