More Models are available
SUN-250G: B004TVEF8Y, Wind-250G: B008BDAQDY
Sun-300G: B005N2WHDI, Wind-300G (10.8V ~ 30VAC): B007WQBK2C,Wind-300G (10.8V ~ 30VDC): B005N2OLZU
Sun-500G: B008CNM1SQ, Sun-S500G-HI: B005N29SGM
Wind-500G (10.8V ~ 30VAC): B007WQDKMA, Wind-500G-HI (22V ~ 60VAC): B007X0L2C0
Wind-500G (10.8V ~ 30VDC): B005N2ST9E, Wind-500G (22V ~ 60VDC): B007X0OVGO
Sun-600G: B007XAEINU, Sun-600G -HI (10.8V ~ 30VDC): B005N2VLO4
1, Connect the Solar Panel DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m, longer cables will experience higher voltage drop.
2, Connect the supplied AC power cord to the inverter and plug it to a home wall socket.
3, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, and this is called "Island Protection"
Normal AC Output Power: 900W
Maximum AC Output Power:1000W
AC Output Voltage Range: 90V ~ 130V AC
AC Output Frequency Range: 46Hz ~ 65Hz
Total Harmonic Distortion(THD): <5%Power Factor: 0.99
DC Input Voltage Range ( Optional ): 22V ~ 60V DC
Peak Inverter Efficiency: 92%
Standby Power consumption: <1W