3 of 3 people found the following review helpful
Transfer Your Toyo Emblems If You Have Them - Very Nice,
This review is from: Set of Four Replica 2004 16 inch Toyota Sienna Hubcaps - Wheel Covers
Just received these and installed onto our Sienna. Very nice. Thanks so much to the reviewer that took the time to post a picture of how to remove the old Toyota emblem from your old wheel covers. You need only sand or file down the back side where you see the plastic tabs were melted (or something) to make them bond to the original hubcab. Once you do that, and it does not take much at all, you can take a flat head screw driver and pop the emblem off from the front. If you feel any resistance at all when you go to pop it off, file some more. Not worth risking snapping the emblem. It will come off very easy when it's ready. Then just remove the old tabs (i had 3 per emblem) with a pair of wire cutters or nail clippers work great. Once they are flat and clean, super glue them to your new wheel covers. Perfect! Takes about 15 minutes total and well worth the effort.
I will add that if you do not plan to move the emblems, these wheel covers will look a little lame and 'aftermarket' like you bought them off the shelf at an auto parts store or something. If you lost a hub cab and don't have the emblem to move, I'd probably recommend gettng an original Toyota cover on Ebay or something despite the extra cost.