65 of 72 people found the following review helpful
Great video for the price,
Verified Purchase(What's this?)
This review is from: Mini Wireless Color Camera with Microphone without stand (Camera)
This little camera works great for keeping an eye on things. A word of advice, be sure to set the channel on the camera so as to not interfere with any wifi network you are running. The switches are on the camera. two tiny white switches on the side of the camera, then adjust the reciever to that channel with the adjustment knob on the top. Once that was don, all of my wireless stuff was happy and working well.
Tracked by 2 customers
Sort: Oldest first | Newest first
Showing 1-7 of 7 posts in this discussion
Initial post: Aug 9, 2012 10:47:27 PM PDT
Last edited by the author on Aug 9, 2012 10:48:01 PM PDT
I have this camera and do not see any thing that remotely looks like a switch on the camera. Help!
In reply to an earlier post on Aug 10, 2012 5:22:10 AM PDT
Last edited by the author on Aug 10, 2012 6:08:45 AM PDT
There isn't a switch on the camera. If you want it on plug it in, off pull the plug. It is nice and simple like that. Hopefully this helps. I went over my review look on top for the transmit frequency selector.
In reply to an earlier post on Aug 10, 2012 10:13:30 PM PDT
Last edited by the author on Aug 10, 2012 10:15:18 PM PDT
How do I connect the receiver to my monitor (television) with AV cable. There are so many places to plug the white and yellow cables into. After I hook that part up, how do I get a picture on my TV? Any channel I should tune in to? Thanks for being helpful. There are some instructions I need that are more than are described in the "Manual"
In reply to an earlier post on Aug 11, 2012 2:37:54 AM PDT
I believe the white is an RCA jack for video there should be a similar jack on the tv the yellow is for sound depending on how far apart the video in jacks and the sound in jacks you may have to find a way to bridge the gap. At any rate the receiver doesn't work off of the old analog signal it works closer to a video game hook up. On the receiver is a nob that you turn with the camera on to find the picture. On the TV I used the receiver jacked in to the Video 1 input.
In reply to an earlier post on Aug 12, 2012 7:43:30 PM PDT
Last edited by the author on Aug 12, 2012 7:47:57 PM PDT
I plugged the white jack into a video plug and the yellow into a audio plug (several combinations). I don't have anything that resembles a video game hook up as I don't have any games. And, I don't understand what you meant when you said "on the tv I used the received jacked into the videa 1 input. I hate to admit defeat but I'm going to give up. Too frustrating.
In reply to an earlier post on Aug 13, 2012 4:39:37 AM PDT
If there is power going to the camera then it is on. TVs from as far back as the 80s have the auxiliary RCA Jacks in the back, at the time these were for VCRs or video games you have one red jack one yellow jack and one white jack one is for the picture the other two are for left and right channel for stereo sound. Yellow goes with yellow ect. Put power to the camera hook up the reciever on perhaps video one or what ever setting on the tv works with the jacks you are using and using the dial on fromn of the receiver tune in the camera. Try having the camera close to the receiver, that may help.
Posted on Jan 16, 2013 6:43:06 PM PST
Can anyone post some example of picture taken with this camera?
‹ Previous 1 Next ›