Your rating(Clear)Rate this item


There was a problem filtering reviews right now. Please try again later.

4 of 4 people found the following review helpful
on September 14, 2011
Verified Purchase
It works. It arrived quickly. It's relatively easy to install for a do-it-yourselfer. It's much less expensive than buying at Sears. My only concern is the durability of the plastic fins that move the water out of the pump. A piece of wire got in the old pump, which also had plastic fins, and it sheared the fins off, making the pump useless.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
2 of 2 people found the following review helpful
on October 28, 2013
Verified Purchase
I installed this in a Frigidaire model GLTF2940FS0 and it was virtually identical to the original. The only difference I noticed is that the electrical connector was rotated 90 degrees from the original pump. I didn't notice this until after I installed the pump and connected the hoses. After trying to connect the electrical connector unsuccessfully I used an inspection mirror and saw that I just need to rotate the connector. I rotated the connector and it went right in. The washing machine is now working again, and seems to be a little quieter than I remember.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
2 of 2 people found the following review helpful
on June 25, 2013
Verified Purchase
Pro:
Price
Works well when installed
Smooth and quiet
Build and quality look to be same as OEM

Con :
Install was not the 10 minute job I had planned on.
I believe this pump is represented as being a substitute for 137108000.
From what I can figure the 137108100 discharges to the right side whereas the 137108000 (which I needed) discharges to the left.and the mounting base is different.
Used the mounting bracket from my old pump to avoid drilling. Turned the orientation of the pump head and check vlave. The modification is not rocket science but could deter individuals that are not mechanically inclined. Just have to make sure that the pump head goes back together properly so do not get leaks.
Hope the modification info is usefull to others.
I would purchase agian
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
1 of 1 people found the following review helpful
on October 5, 2014
Verified Purchase
This part was an exact match for the broken drain pump in our Frigidaire model ATFB6700FS0 washing machine. The pump I replaced had the number 137108100 on it so I was pretty sure this replacement pump would work. Installation was pretty straightforward and ended up being a very cheap fix for a previously nonfunctional washing machine. This replacement pump looked identical to the one it replaced and will hopefully last as long.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
1 of 1 people found the following review helpful
on December 1, 2013
Verified Purchase
It worked two weeks. Had to buy one from local shop to fix it. Was not same quality at all! O'well that happens sometimes. The one from Dayton applance costed almost three times as much.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
1 of 1 people found the following review helpful
on December 1, 2013
Verified Purchase
It was the right fit and received it very fast!! My washer is a Frigidaire but the cross reference they gave me was the perfect fit!
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
1 of 1 people found the following review helpful
on November 2, 2012
Verified Purchase
Works fine... It had to be retro-fitted (simple) to fit in my front loading wash machine. Other than that the product is as described.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on July 15, 2014
Verified Purchase
The
Electrolux 137108100 Washer Drain Pump started working right away. If you can use a screw driver and pliers you can do this job.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
All I had to do was unscrew the pump cover and rotate the outlet 45 degrees
and it fit and was l1/3 less $$$ then the perfect one. Washer no longer making
a racket.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on May 23, 2014
Verified Purchase
Couldn't be happier, this little part fixed my washer...saved me the money of a service call and it was very easy to install!
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Questions? Get fast answers from reviewers

Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
See all 17 answered questions


Send us feedback

How can we make Amazon Customer Reviews better for you?
Let us know here.

Your Recently Viewed Items and Featured Recommendations 
 

After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in.