Have one to sell? Sell on Amazon

Multipurpose Workbench with Lighting and Outlet

by Unknown
3.7 out of 5 stars 39 customer reviews
| 3 answered questions

Available from these sellers.
    This fits your .
  • Enter your model number to make sure this fits.
  • Multipurpose
  • Lighting and Outlet
  • Comfortable 34" workbench height for working while seated or standing
  • Peg board, two drawers, and top and bottom shelves
4 new from $119.95

Product Description

Comfortable 34" workbench height for working while seated or standing. Peg board, two drawers, and top and bottom shelves provide space for mounting, storing, and accessing tools. Portable 120 volt, 14 watt, UL-listed cabinet light offers great visibility Portable 125 volt, 15 amp, 1875 watt, UL-listed power strip features 3 three-prong grounded outlets for power tools and a generous 80" power cord Long 9-3/4 ft. two-prong polarized cabinet power cord 8 ft. clearance for the entire assembled unit Weight capacity: Tabletop - 220 lbs, Top shelf - 44 lbs. Includes all assembly hardware Overweight Item subject to 14.95 additional Freight Charge. Use only T5 14 watt replacement bulbs. Top shelf: 47-1/4" L x 9" W x 3-1/4" H Top shelf table distance: 22-1/2" Peg board: 47" W x 23" H Table top: 47-1/4" L x 23-1/4" W x 5/8" T Drawers:19-3/4" W x 17-3/4" depth x 2-1/4" deep Bottom shelf: 47-1/4" L x 23-5/8" W x 5/8" thick Cabinet power cord: 117" Power strip power cord: 80" Workbench assembled dimensions: 47-1/4" L x 24" W x 61-1/4" H Cabinet light: 22-3/4" L x 7/8" W x 1-5/8" H Shipping Weight: 91.00 lbs.


Product Information

Technical Details

Additional Information

Warranty & Support

Product Warranty: For warranty information about this product, please click here

Feedback

If you are a seller for this product, would you like to suggest updates through seller support?
Would you like to tell us about a lower price?

Customer Questions & Answers

Customer Reviews

Top Customer Reviews

Verified Purchase
I ordered and assembled this product for my garage. It is made of cheap materials and I have had many struggles getting it together. The hardware package was incorrect, with missing pieces, screws that had damaged threads and unequal parts (e.g. had like 7 extra washers and was missing about 10 screws). The manufacturer was rude and difficult when I called to request a new hardware pack so that I could finish the construction. They suggested that I go back and ask for the hardware pack from the place where I ordered it from. I explained that I didn't think Amazon had their hardware pack just sitting around and seriously, to this day, I'm not sure that they "got" it. They wanted to charge me for a new hardware pack even though it was their error. I just finished the drawers and they do not fit on the rollers... I'm going to have shim the rollers out so that the drawers don't fall. The materials are so cheap that I'm afraid that it will not stand up to my relatively minor tool collection. Many of the holes are inaccurately drilled and they are difficult to line up. The instructions are worthless and difficult to understand. In general, I'm very disappointed in this product and I would not recommend it. I'm not certain that I am going to be able to make this work and I may end up having to throw the whole thing out. Do not make the same mistake and skip this product. The vendor was fine. He shipped what I ordered and it arrived in a timely fashion.
2 Comments 88 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I bought this for use in my wife's jewelry studio so she would have a place to work. The item arrived in this cardboard box that was as thin as a pc of paper. It had been scratched, dented, and looked horrible. I took one look at the construction of the material, and immediately called HF to ask them for a replacement of the damaged goods. They advised me to talk to the company I bought it from and would not provide any customer service whatsoever.

The workbench itself is made from metal that one would use for a cheap kids toy. When assembled, it was not sturdy at all, my 20 month old son was able to shake the workbench as if it were one of his play things. The drawers are rated at a certain LB rating, but I would not keep anything more than paper in them. The peg board, table top, and shelf are made of extremely cheap pressed board.

I cannot recommend this to anyone for any reason. There are MUCH better workbenches available on the market.
Comment 58 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
This is the same workbench sold by Harbor Freight for a very similar price. Once assembled it's sturdy enough for light duty work. Some important things to remember:

(a) Pre-sort the parts, including all the little screws and washers, before you do anything else. I recommend a sorting bin with a locking lid, so you don't have to worry about spilling them all over the place during the inevitable 'who bumped this?' incident.

(b) Get a friend to help. This will reduce your assembly time from 2.5 hours to approximately 1 hour.

(c) Don't tighten the nuts until you fully assemble the bench. Check square and tighten everything EXCEPT the middle drawer support. Put the drawers in and check their run (you may have to swap the drawers side to side to get a better fit). Once everything runs smoothly, tighten the middle support.

(d) Throw the light fixture in the trash. Go to your local hardware store and buy something you like (that actually works). Use that instead.
Comment 38 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
Quality seemed okay when I opened the badly damaged box. The reviews I read stated that it was difficult to build, instructions poor and parts were missing. Because of this I carefully checked all parts and followed the instructions. All went well until I got to the drawers. They did not fit right and the ball bearing casing was faulty. The good news other than the hassle of having to take it apart and rebox it, is that the company replied quickly, credited my account and sent me a prepaid label to ship it back.
Comment 23 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
This is a nice light duty workbench. It can be had for under $100 at Harbor Freight, maybe even less with coupons. The build quality is similar to the low budget metal shelves you get at home depot. This is certainly not something you can attach a vice to and start hammering away. If you organize your parts and screws prior to building it, everything goes together fairly well. Once thing to consider is what side you want your power supply on, prior to building. The weakest point has to be the drawers.
Comment 9 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I hired a professional assembler, and while he assembled my other 9 boxed products, he said didn't want to tackle this one. I then hired a second professional assembler who spent 5 hours assembling ($250 for assembly) and commented that this was one of the worst items they have assembled. The other reviewers are correct - the drawers also do not fit right.
1 Comment 19 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
while the bench itself is nice and could perform as advertise, a couple pieces were missing, such as the front to one of the drawers. I called the company, HF, only to find out the bench is out of production and getting parts is not possible. Sold through Best Prices.
Comment 9 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Don't understand why people are having so many problems.

Assembly does take take since there are a lot of parts, but if you follow the directions to finger tighten first and then tighten all later with a screwdriver on one side and a nut driver on the other side, it works out just fine.

The light could have been brighter, but it is easy to replace and you could use this one somewhere else. The black work surface also makes the area appear dark.

Bought at HF with a 20% off coupon for a final price of 72 + tax.
Comment 14 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Most Recent Customer Reviews



Pages with Related Products. See and discover other items: workbenches, tools work table