ARGON/CO2 REGULATOR/FLOWMETER MIG TIG WELDER WELDING
|Price:||$14.95 + $11.00 shipping|
- Enter your model number to make sure this fits.
- Brand New RAND Argon / CO2 regulator and flow meter.
- The body of this heavy duty regulator is all solid forged brass construction to last a lifetime.
- Easily adjust your gas flow rate with the built-in flow meter.
Frequently Bought Together
Customers Who Bought This Item Also Bought
Top Customer Reviews
Still works. No problems. Buy it if you need it.
Another reviewer mentioned that the threads on the outlet side of the regulator were not standard for the connectors normally found on MIG welders - neither were mine. There was a brass barb fitting screwed into the threaded outlet of the gauge.
In order to get the gauge to work with the gas line fitting on my welder, I had to turn the barbed end of the fitting off with a lathe, bore out the remaining threaded end of the fitting, then tap it for a standard thread size. I was then able to screw an adapter onto the modified fitting, that my welder gas line would fit.
I have not used the regulator as of yet, however, I did install it on my tank and turned it on to make sure it worked. During that 5 second test, it appeared to work normally.
The rating given is the result of the item not being the name brand advertised, and the fact that the threaded outlet is not the size or thread type found on the gas lines on gas shielded welders in the US.
Most Recent Customer Reviews
The threads going into the bottle are sloppy and it also would not seal. I ended up buying a Radnor gauge and no problems.Published 3 months ago by Virgil Whisler
This flow meter must be made in china, light weight and it will not even tighten up on my argon tank. Will be sending this item back for refund.Published 6 months ago by fred Garcia