|Item Weight||17 pounds|
|Product Dimensions||9 x 13.2 x 15 inches|
|Material||die cast steel|
|Item Package Quantity||1|
ARKSEN Eyelet Maker Hand Press Grommet Machine w/ 1500PC Set Grommets 3 Die #0 #2 #4, Blue
We don't know when or if this item will be back in stock.
- Enter your model number to make sure this fits.
- Professional Results Our grommet tool and grommets set further into the material, pressing onto more material which results in a better grommet
- Interchangeable Dies 3 interchangeable dies meets all your different needs
- Die cast steel construction is built to last and will provide years of maintenance free performance
- Easy To Use - Simply add a grommet to the machine and press down for professional grommets everytime
- Overall Dimensions: 9"(L) x 13-1/4"(W) x 15"(H)
Customers who bought this item also bought
Customers also shopped for
What other items do customers buy after viewing this item?
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
This grommet machine is perfect for making or replacing grommets for banners, flags, belts, eyelets, signs and more! Construction is built to last and will provide years of maintenance free performance. 500lbs of force easily creates professional grommets fast and neatly.
Applicable for Banners, signs, awnings, posters, curtains, digital printing, scrap booking, corset, belts, shoes and more.
Heavy Duty Construction Die cast steel construction is built to last and will provide years of maintenance free performance
Interchangeable Dies 3 interchangeable dies meets all your different needs
Professional Results Our grommet tool and grommets set further into the material, pressing onto more material which results in a better grommet
This machine can be used with the rolling base for added convenience, as a stand alone or mounted to a bench or tabletop.
Easy To Use Simply add a grommet to the machine and press down for professional grommets every time
Multi-Purpose Accommodates a wide variety of materials from fabric to tarp
Comfortable foam padded lever handle provides 500lbs of pressing force
Die #0 Hole Size: 1/4" (6mm)
Die #0 Flange Diam.: .394" (10 mm)
Die #0 Under Flange Height: .197" (5mm)
Die #2 Hole Size: 3/8" (9mm)
Die #2 Flange Diam.: .748" (19mm)
Die #2 Under Flange Height: .236" (6mm)
Die #4 Hole Size: 1/2" (12mm)
Die #4 Flange Diam.: .866" (22mm)
Die #4 Under Flange Height: .276" (7mm)
Overall Dimensions: 9"(L) x 13-1/4"(W) x 15"(H)
Grommet Dies (#0, #2, #4)
500pc Steel #0 Grommets
500pc Steel #2 Grommets
500pc Steel #4 Grommets
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
Easy assembly. Remove bolt with included hex wrench and attach handle. Bolt is threaded where the handle pivots so threads will become smashed over time which may make it hard/impossible to remove the screw. I hope I don't have to remove the handle.
Mine is noticeably out of alignment so the two smaller grommet sizes don't perfectly crimp round. As the body is cast iron, units from the same cast will have the same problem. It's not so bad that it is unusable, it just doesn't make nice looking crimps for the two smaller grommet sizes.
One die had some rust on it so I ended up cleaning it up with WD-40. I recommend cleaning all the dies and lightly oiling all moving parts and the threads on the dies.
The bottom die fits into the bottom hole of the body and the top die threads onto the top shaft. The top die has a spring loaded center pin that can be depressed to allow installation of the dies.
The included grommets are advertised to be stainless steel but are attracted to a magnet like ordinary steel. Not sure how long this will last in a wet/damp environment before rusting.
I tested each grommet size on a post card that just happened to be within reach. #0 & #2 dies punched through easily but had noticeably asymmetric holes. The #4 dies required more strength but the hole looked nice and round. Some cardboard was stuck between the grommet but that was expected. Note that I normally punch a hole in the material before I attach the grommet.
I place the machine on the ground so that it is easy to lean into it.
I decided not to get the model with the wheels as I didn't want it to move as I leaned into it.
It comes with 3 mounting bolts.
It's good enough for what I want it to do.
I have done a lot of projects with this and so far it gets a A+
Most recent customer reviews