![[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF UHF Antenna Analyzer](https://m.media-amazon.com/images/I/51TpAW13prL._AC_UF480,480_SR480,480_.jpg)
![[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF...](https://m.media-amazon.com/images/I/51TpAW13prL.__AC_SR166,182___.jpg)
![[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 &Portabl...](https://m.media-amazon.com/images/I/51oBVk4tuyL.__AC_SR166,182___.jpg)
Just arrived today and I am totally blown away by this little compact 3GHz capable VNA for $130 bucks. I am nearly giddy with amazement, because not only is the construction of the product (full metal case) solid built, but hardware is really quite capable. As anyone who has previously purchased the NanoVNA series knows, its very functional for hobby and minor field work. This unit, the SAA-2N V2.2 is the latest in the NanoVNA series which now includes 'N' type RF connections instead of SMA. Most engineers and HAM enthusiasts will appreciate that when you need to connect to antennas outside, or test receiver LNA's and downstream equipment, you likely need to use N-type connections. Noting that it is totally possible to use N-to-SMA adapters for the earlier models, the problem lies in the fact that when you attach a heavy N-type cable to a same fragile SMA adapter, you run the risk of snapping it in two, but not so with this unit. The SAA-2N V2.2 has the same good RF performance for S-parameter measurements as previous models, so I won't cover that in this review. Having the screen now at a pleasant 4 inches is very helpful compared to the earlier 2.7", and 3.2" versions. The specs have conflict when it comes to battery capacity, in the graphic images is a comparison that says it has 3000mA/Hr but down in the text area of the spec it states 1950mA. I will have to report back to really see which is correct. I own a very nice HP8753C vector network analyzer along with several calibration kits. I ran some tests using the HP85032B cal kit on my VNA and then testing each of the three hardware cal adapters that came with the SAA-2N V2.2 . The Short and Open have virtually no difference and the RF 50ohm Load held better than -30dB return loss at 3GHz, which is really not bad. That is a VSWR: of 1.065. Using a 10dB attenuator on S11 port, yielded a near perfect -19.96dB return loss. The two N-Type to N-Type 20.5" long cables are pretty good, and able to maintain a -23dB return loss out to 3GHz, which is better than Port 2 can perform at (-13dB RL).
I really am impressed at what it can do and all that is included for the price. I now can have a portable VNA virtually anywhere I go. And if you need a hardcopy of your measurements, you can download the free PC software from GITHUB which will allow the VNA to output data via the USB port to the computer and then you can save it in S2P or CSV for later. (You have to make the measurement while using the software, and you can't save it on the instrument and then later print it via the PC.)
Fantastic piece of gear for the money!
Add to your order
-
Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary) -
24/7 support when you need it. -
Quick, easy, and frustration-free claims.
Cover this product:
2-Year Protection $15.99
3-Year Protection $21.99
Cover all of your eligible devices:
Asurion Complete Protect: One plan covers all eligible past and future purchases (Renews Monthly Until Cancelled) $16.99/month
Select a plan
Add to your order
- Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary)
- 24/7 support when you need it.
- Quick, easy, and frustration-free claims.
Cover this product:
Select a plan
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Coupon:
on 2 select item(s) Terms
Make it a bundle
We found 5 bundles with this item:
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer, 50KHz-3GHz HF VHF UHF VNA Antenna Analyzer Ham Radio with Storage Bag, Measuring S Parameters, Duplexer, VSWR, Phase, Delay
Page 1 of 1Start overPage 1 of 1
-
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer 50KHz-3GHz & Nanovna Testboard Kit$131.69 $136.68This bundle contains 2 items -
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer&SMA Calibration Kits Test,Connectors SMA Male to Male Jumper 2pcs$132.99 $139.79This bundle contains 2 items -
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer&2PCS SMA Male to Male Coax Cable$126.99 $133.98This bundle contains 2 items -
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer, 50KHz-3GHz Antenna Analyzer Ham Radio with Storage Bag, with Filter Attenuator, RF Demo Kit NanoVNA RF Tester Board$134.69 $138.98This bundle contains 2 items -
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer, 50KHz-3GHz Antenna Analyzer Ham Radio with Storage Bag, Handheld Antenna Cable$130.89 $137.97This bundle contains 2 items
Frequently bought together
This item: AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer, 50KHz-3GHz HF VHF UHF VNA Antenna Analyzer Ham Radio with Storage Bag, Measuring S Parameters, Duplexer, VSWR, Phase, Delay
$124.99
Get it as soon as Tuesday, Aug 20
In Stock
+
$9.99
Get it as soon as Wednesday, Aug 21
In Stock
+
$7.89 ($3.95/Count)
Get it as soon as Tuesday, Aug 20
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
4 stars and above
Page 1 of 1Start overPage 1 of 1
Product Description
NanoVNA SAA-2N V2.2 Antenna Analyzer 50kHz-3GHz, 4inch Touchscreen Display with Storage Bag for Ham Radio
Support S11 S21 Parameter Measurements
- Transmission Mearsure S21: 70dB (50KHz-1.5GHz), 60dB (1.5GHz-3GHz)
- Reflection Measure S11: 50dB (50KHz-1.5GHz), 40dB (1.5GHz-3GHz)
- Antenna Analyzer: 1.005 (50KHz - 1.5GHz), 1.02 (1.5GHz-3GHz)
|
|
|
|
|---|---|---|
Improved Performance: 50kHz-3GHzThe NanoVNA SAA-2N V2.2 Antenna Analyzer provides perfect vector network measurement capabilities. Constructed with a metal shell, reduce the external interference and improve the measurement accuracy stability. |
Battery: 3000mAh lithium-ionBuilt-in 3000mah rechargeable lithium battery, can work continuously for more than 8 hours, with type-C charging cable and LED charging indicator. USB interface: Micro USB, battery powered or USB-C powered |
With the carrying bag for carrying outThe SAA-2N V2.2 is lightweight and portable, allowing users to bring it on-site for efficient measurements in different environments. 4.0 inch touch screen, easier for you to read data and test. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NanoVNA SAA-2N V2.2 | NanoVNA V2 PLUS4 | NanoVNA V2 PLUS4 Pro (PLUS5) | 7in NanoVNA SV4401A | LibreVNA 2.0 | NanoRFE VNA6000 | |
|
|
|
|||||
| Customer Reviews |
230
|
17
|
17
|
— |
16
|
— |
| Price | $124.99 | $249.88 | — | — | $729.88 | $879.99 |
| Display | 4 inch | 4 inch | 4 inch | 7 inch | X | 4 inch |
| Frequency range | 50kHz-3GHz | 50kHz-4GHz | 50kHz-4GHz | 50kHz-4.4GHz | 100KHz-6GHz | 50kHz-6GHz |
| Case | Metal Shell | Metal Shell | Metal Shell | Metal Shell | Metal Shell | Metal Shell |
| With Storage Bag | ✓ | ✓ |
Compare with similar items
This Item  AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer, 50KHz-3GHz HF VHF UHF VNA Antenna Analyzer Ham Radio with Storage Bag, Measuring S Parameters, Duplexer, VSWR, Phase, Delay |  | ![[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF UHF Antenna Analyzer](https://m.media-amazon.com/images/I/51TpAW13prL._AC_.jpg) |  |  | |
| Price | $124.99 | $147.99 | $59.99 | -10% $107.99 List: $119.99 | $89.99 |
| Delivery | Get it as soon as Tuesday, Aug 20 | Get it as soon as Tuesday, Aug 20 | Get it as soon as Tuesday, Aug 20 | Get it as soon as Wednesday, Aug 21 | Get it as soon as Wednesday, Aug 21 |
| Customer Ratings | |||||
| Touch Screen | |||||
| Accuracy | |||||
| Easy to use | |||||
| Value for money | |||||
| Sold By | AURSINC | HUAIFANGPING | AURSINC | HUAIFANGPING | HUAIFANGPING |
| antenna description | Radio | — | Radio | Radio | — |
From the brand
PROFESSIONAL ITEMS & SERVICES
AURSINC specialize in providing accurate and practicaltesting instruments and development equipment,delivering attentive services
-
AURSINC dedicated to providing professional measurement tools and electronic products to meet the needs of both hobbyists and professionals
Our dedicated customer support is always ready to assist you with any questions or concerns you may have
Thank you for considering AURSINC as your trusted partner for all your measurement tool needs
-
NanoVNA-H Antenna Analyzer
Measurement Frequency:10KHz - 1.5GHz Measurement Range: 70dB(50kHz-300MHz); 60dB(300M-900MHz); 40dB(900M-1.5GHz)
-
Tinysa Spectrum Analyzer
High Quality MF/HF/VHF Input for 0.1MHz - 350MHz
Lesser quality UHF input for 240MHZ-960MHZ
-
-
-
-
-
-
NanoVNA-H4
-
NanoVNA-F V2
-
7in NanoVNA SV4401A
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
26:34
Click to play video
SAA2N Overview Operation
AURSINC
Videos for this product
15:41
Click to play video
AURSINC SAA-2N Nanovna
AURSINC
Related products with free delivery on eligible orders
Page 1 of 1Start overPage 1 of 1
Sponsored | Try Prime for unlimited fast, free shipping
Reviews with images
Initial tests seem good.
Out of box experience overall: Not bad!Couple of minor negatives to get out of the way: The case is steel. Consequently it is a lot heavier than it needs to be, and subject to rust. Would have preferred aluminum for obvious reasons. The screening on the case is essentially unreadable. Good news is there are few things to label. RF N Port 0 is the one closest to a protruding tab. Menu open is center button, other buttons are up / dn navigate, or just use the touch screen. Finger or included stylus. Also a USB:C would be preferred I'm guessing for many, but the USB mini cables are plentiful plus it is supplied with one. No on-screen batt voltage indication, but the 3 LEDs on the back that are grouped together show a 100/66/33 % power left indication and seem accurate enough. While charging each LED will sequentially blink to show charging status until all are solid.illumination. Seems to charge quickly from standard phone charger. (2 to 3 hrs)YouTube is your friend for quick start. They are all very similar in operation.Some Big Pros I see with this unit:N connectors! I don't really trust flimsy SMAs for long-term use like most of them have.You can Calibrate for a particular freq range and save to a slot. Comes with calibration slugs. Slot 0 is recalled at power up. Config settings such as screen rotate are also recalled at startup. This makes this unit very useable for frequent repeated antenna tests.You can turn it on an test an swr sweep or other tests in seconds! Easy to recall other calibrations for other ranges/antennas from other slots. 10 slots. Attached photo tests a commercial airband antenna and to my surprise it was right in spec. No more guessing about antennas whether commercially purchased or home built! Up to 201 scanning points per selected freq range compared to half that for most nanovna units. The plots seems smooth without a lot of noise.Nice bright screen! Case holds all accessories, though it is a tight fit. You should be able to fit in a couple extra adapters such as UHF or SMA but that's about it. Haven't used PC software yet. Provides more capability, but the beauty of this is quick accurate tests in the field just stand-alone. Recommending for the moment.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on September 22, 2020
I really am impressed at what it can do and all that is included for the price. I now can have a portable VNA virtually anywhere I go. And if you need a hardcopy of your measurements, you can download the free PC software from GITHUB which will allow the VNA to output data via the USB port to the computer and then you can save it in S2P or CSV for later. (You have to make the measurement while using the software, and you can't save it on the instrument and then later print it via the PC.)
Fantastic piece of gear for the money!
Unbelievable 3GHz VNA with 4" Screen and CAL Hardware
Reviewed in the United States on September 22, 2020
Just arrived today and I am totally blown away by this little compact 3GHz capable VNA for $130 bucks. I am nearly giddy with amazement, because not only is the construction of the product (full metal case) solid built, but hardware is really quite capable. As anyone who has previously purchased the NanoVNA series knows, its very functional for hobby and minor field work. This unit, the SAA-2N V2.2 is the latest in the NanoVNA series which now includes 'N' type RF connections instead of SMA. Most engineers and HAM enthusiasts will appreciate that when you need to connect to antennas outside, or test receiver LNA's and downstream equipment, you likely need to use N-type connections. Noting that it is totally possible to use N-to-SMA adapters for the earlier models, the problem lies in the fact that when you attach a heavy N-type cable to a same fragile SMA adapter, you run the risk of snapping it in two, but not so with this unit. The SAA-2N V2.2 has the same good RF performance for S-parameter measurements as previous models, so I won't cover that in this review. Having the screen now at a pleasant 4 inches is very helpful compared to the earlier 2.7", and 3.2" versions. The specs have conflict when it comes to battery capacity, in the graphic images is a comparison that says it has 3000mA/Hr but down in the text area of the spec it states 1950mA. I will have to report back to really see which is correct. I own a very nice HP8753C vector network analyzer along with several calibration kits. I ran some tests using the HP85032B cal kit on my VNA and then testing each of the three hardware cal adapters that came with the SAA-2N V2.2 . The Short and Open have virtually no difference and the RF 50ohm Load held better than -30dB return loss at 3GHz, which is really not bad. That is a VSWR: of 1.065. Using a 10dB attenuator on S11 port, yielded a near perfect -19.96dB return loss. The two N-Type to N-Type 20.5" long cables are pretty good, and able to maintain a -23dB return loss out to 3GHz, which is better than Port 2 can perform at (-13dB RL).Reviewed in the United States on September 22, 2020
I really am impressed at what it can do and all that is included for the price. I now can have a portable VNA virtually anywhere I go. And if you need a hardcopy of your measurements, you can download the free PC software from GITHUB which will allow the VNA to output data via the USB port to the computer and then you can save it in S2P or CSV for later. (You have to make the measurement while using the software, and you can't save it on the instrument and then later print it via the PC.)
Fantastic piece of gear for the money!
Images in this review
Reviewed in the United States on August 24, 2022
Out of box experience overall:
Not bad!
Couple of minor negatives to get out of the way:
The case is steel. Consequently it is a lot heavier than it needs to be, and subject to rust. Would have preferred aluminum for obvious reasons.
The screening on the case is essentially unreadable. Good news is there are few things to label.
RF N Port 0 is the one closest to a protruding tab.
Menu open is center button, other buttons are up / dn navigate, or just use the touch screen. Finger or included stylus.
Also a USB:C would be preferred I'm guessing for many, but the USB mini cables are plentiful plus it is supplied with one.
No on-screen batt voltage indication, but the 3 LEDs on the back that are grouped together show a 100/66/33 % power left indication and seem accurate enough.
While charging each LED will sequentially blink to show charging status until all are solid.illumination. Seems to charge quickly from standard phone charger. (2 to 3 hrs)
YouTube is your friend for quick start. They are all very similar in operation.
Some Big Pros I see with this unit:
N connectors! I don't really trust flimsy SMAs for long-term use like most of them have.
You can Calibrate for a particular freq range and save to a slot. Comes with calibration slugs.
Slot 0 is recalled at power up.
Config settings such as screen rotate are also recalled at startup. This makes this unit very useable for frequent repeated antenna tests.
You can turn it on an test an swr sweep or other tests in seconds!
Easy to recall other calibrations for other ranges/antennas from other slots. 10 slots.
Attached photo tests a commercial airband antenna and to my surprise it was right in spec.
No more guessing about antennas whether commercially purchased or home built!
Up to 201 scanning points per selected freq range compared to half that for most nanovna units. The plots seems smooth without a lot of noise.
Nice bright screen!
Case holds all accessories, though it is a tight fit. You should be able to fit in a couple extra adapters such as UHF or SMA but that's about it.
Haven't used PC software yet. Provides more capability, but the beauty of this is quick accurate tests in the field just stand-alone.
Recommending for the moment.
Not bad!
Couple of minor negatives to get out of the way:
The case is steel. Consequently it is a lot heavier than it needs to be, and subject to rust. Would have preferred aluminum for obvious reasons.
The screening on the case is essentially unreadable. Good news is there are few things to label.
RF N Port 0 is the one closest to a protruding tab.
Menu open is center button, other buttons are up / dn navigate, or just use the touch screen. Finger or included stylus.
Also a USB:C would be preferred I'm guessing for many, but the USB mini cables are plentiful plus it is supplied with one.
No on-screen batt voltage indication, but the 3 LEDs on the back that are grouped together show a 100/66/33 % power left indication and seem accurate enough.
While charging each LED will sequentially blink to show charging status until all are solid.illumination. Seems to charge quickly from standard phone charger. (2 to 3 hrs)
YouTube is your friend for quick start. They are all very similar in operation.
Some Big Pros I see with this unit:
N connectors! I don't really trust flimsy SMAs for long-term use like most of them have.
You can Calibrate for a particular freq range and save to a slot. Comes with calibration slugs.
Slot 0 is recalled at power up.
Config settings such as screen rotate are also recalled at startup. This makes this unit very useable for frequent repeated antenna tests.
You can turn it on an test an swr sweep or other tests in seconds!
Easy to recall other calibrations for other ranges/antennas from other slots. 10 slots.
Attached photo tests a commercial airband antenna and to my surprise it was right in spec.
No more guessing about antennas whether commercially purchased or home built!
Up to 201 scanning points per selected freq range compared to half that for most nanovna units. The plots seems smooth without a lot of noise.
Nice bright screen!
Case holds all accessories, though it is a tight fit. You should be able to fit in a couple extra adapters such as UHF or SMA but that's about it.
Haven't used PC software yet. Provides more capability, but the beauty of this is quick accurate tests in the field just stand-alone.
Recommending for the moment.
Images in this review
Reviewed in the United States on February 5, 2021
Reviewed in the United States on October 4, 2021
