I worked in an auto body shop when I was younger and these are so much better than the old models. I sprayed my fence, shed and part of my house. Used latex paint, thinned with water on the 1.8 nozzle. It worked just fine. Having the regulator at the gun was very helpful for fine tuning the spray. Will try some lacquer and urethane on some re-finishing projects this winter.
I researched just about every HLVP paint gun out there. This set had everything I was looking for. Note: Search around using different search terms. The pricing from different providers can vary as much as $40. Check for price plus shipping.
(1) 1.8mm Primer Spray Gun; (1) 1.4mm Topcoat Spray Gun; (1) 1.0mm Touch-up Spray Gun, (2) 1 Liter Aluminum Cups, (1) 125cc Stainless Steel Cup. Also includes: (1) Regulator (0-180 PSI 0-12 BAR); (1) Face Mask; (1) Cleaning Kit; (1) Spanner Wrench; (1) Hex Wrench; (1) Brush; (2) Filters.
Also included but not in the picture or description is the MINI INLINE AIR FILTER-Paint Spray Gun-Tool Water Trap by TCP Global, an addition value of $9.96. This is needed to keep the water from the compressor out of the gun and the material you are spraying. Put this in line before the spray gun.
The quality of the spray guns is very good. Well made, good precision adjustments. Comfortable in your hands. I like that the spray pattern knob is on the side and the spray volume knob is on the back.
They come with metal paint containers. You have a metal to metal connection with a compression gasket where they meet. No issues with loose connections, leaks or stripped threads on plastic containers.
Having the small regulator at the spray gun is very helpful when working to get the desired spray pattern. I put a male and female quick connect on the regulator so that I can attach it between the hose and any of the guns I am using.
To get the right spray, start with a viscosity cup for measuring the thickness of your material. Earlex SG244 Liquid thickness/Viscosity measuring Cup Ford #4. Google for viscosity charts to learn how thick materials should be.
Then it takes adjusting the spray pattern, volume of paint, and air pressure to get the right volume and atomization of the spray desired. If you are not experienced I suggest starting with water and practicing with all the adjustments. Run each out to its max and min to see what they do ( for air pressure try from 10 to 50 lbs ) and then work them in combination to see how different combinations of settings affect the spray. If you are spraying water you can do this on a large sheet of paper, an old sheet of plywood, the side of your garage or your fence. Lots of area to see what different adjustments do.
Better to do a few light coats than try for a thick coat and get drips. When you have actual paint etc. you will want to practice on some paper or cardboard to get the adjustments right, before spraying on your project.
The guns disassemble with the tools provided. Some of the nuts may be a little tight the first time getting them off. After you spray, immediately clean out the gun to avoid clogging. Google, spray gun cleaning for write ups and videos.
So after you have played around with them, you want to clean out the lubricant that shipped on the guns parts. Tear them down, clean the shipping oil and reassemble. Now you have a clean gun ready for use.
Having the spray gun and paint strainer stand is very helpful. Otherwise it is difficult to hold the gun, and strain the paint into the paint cups. The only thing this kit does not have is the paint strainers. It would only be a few pennies to throw in a few paint strainers to get you started. Otherwise you need to order them or go out and get some. It is highly recommended to strain your paint so it keeps any small particles out of the small passages in the spray guns. It is a real pain to have to stop in the middle of a job to tear down and clean out a clogged spray gun. Each of the guns has a removable filter just below where the paint cups screw on. When cleaning the guns, remember to remove the filters and flush them out. There are two replacement filters in the kit.
Just remember you should get some quick connectors to screw onto the paint guns, regulator and other in line parts. Amazon and Harbor freight are good places to look. You will also need some Teflon thread tape for any of your screw connections.
Hope this review helps. Have a good time spraying.
| Brand | Advanced Tool Design |
|---|---|
| Tank Volume | 1 Liters |
| Color | Multicolor |
| Material | Stainless Steel |
| Item Weight | 3.2 Pounds |
| Style | Gun |
| Power Source | Air Powered |
| Maximum Pressure | 45 Pound per Square Inch |
| UPC | 663126069001 |
| Global Trade Identification Number | 00663126069001 |
| Manufacturer | ATD Tools |
| Item Weight | 3.22 pounds |
| Product Dimensions | 20.08 x 20.67 x 4.72 inches |
| Item model number | 6900 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 6900 |
| Special Features | High Volume, Low Pressure |
