Aeon Labs Aeotec Z-Wave Gen5 Multi-Sensor (Z-Wave Plus)
We don't know when or if this item will be back in stock.
- Enter your model number to make sure this fits.
- Detects motion, light sensitivity, temperature and humidity - sends signals to as many as 6 associated Z-Wave devices , These sensors are not compatible with the "WINK" hub
- Increased range up to 500' outdoors, IP42 rated waterproofing , if one of these sensors is not working properly, excluding and re including the sensor will take care of the issue
- Z-Wave Plus certification means new and improved range & reliability with latest Z-Wave Series 500 chipset - OTA upgradeable too!
- Works with all popular Z-Wave Hubs such as Vera and SmartThings
- 4-in-1 Indoor/Outdoor Z-Wave Multisensor
Customers who bought this item also bought
Customers who viewed this item also viewed
Customers also shopped for
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
Compare with similar items
Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
Z-wave Plus Motion Detector, Easy to install with PET Immunity, White (PIRZWAVE2.5-ECO)
Fibaro Z-Wave Motion Sensor - FGMS-001
Bosch Pro-Grade ZigBee Wireless Motion Detector ISW-ZPR1-WP13 - Requires Samsung SmartThings Hub
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensor
|Shipping||—||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Sold By||—||Z-Wave Products||Amazon.com||The Smartest House||MyDigitalDiscount||Aeotec Inc.|
|Included Components||—||MultiSensor 6, Battery Cover, Back-Mount Arm, Double-Sided Tape, Screws (×2), Micro USB Cable||Sensor||Motion Sensor, Mounting Bracket, 1xCR123-A Battery, User Manual||—||—|
|Item Dimensions||0.39 x 118.11 x 0.39 in||2.5 x 1.8 x 1.8 in||2.3 x 3.5 x 1.8 in||1.75 x 1.75 x 1.75 in||3 x 5 x 2 in||1.81 x 1.81 x 1.57 in|
|Item Weight||3.52 ounces||2.08 ounces||—||—||0.6 lb||—|
|Power Source||Battery||Battery powered||battery||Battery-Powered||Battery||Corded-Electric, Battery|
|Size||—||Small||3.5 x 1.8 x 2.3||Small||—||—|
The NEW Gen5 Aeon Labs Multi Sensor is a battery-powered, all-in-one Z-Wave motion sensor, temperature sensor, humidity and lighting sensor. When the sensor detects IR changes in front of its viewing window, it will send radio signals to up to six associated Z-Wave devices within its own Z-Wave network. The sensor can report current temperature and lighting levels in the immediate vicinity. Indoor/Outdoor functioning tolerances allow the sensor to function under weatherized conditions. Various sensitivity levels can be configured to avoid unintentional triggering from small animals such as cats and small dogs. The sensor comes with back-plate mounting to mount flat against walls and swivel arm mount to mount on walls. FEATURES: Low battery detection. Firmware OTA updateable. Latest Z-Wave protocol and commands via the new Series 500 chips, Z-Wave Plus certified. Increased range due up to 500ft Z-Wave RF range (outdoor). Ease of use and installation.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
It seems to function about the same as the older model, with one important improvement. With the old model, I was not able to get lux, temperature And humidity data to all transfer to SmartThings reliably, I had to modify the configuration to stop send lux readings and only receive temp and humidity.
This new model sends all three as it's supposed to, in addition to the motion of course!
Note that the defaults for motion latch times are 4 minutes. I had to write my own custom device type (with the help of the SmartThings community) to enable the ability to set a configuration that worked better for me. I have the motion latch time now set to 1 minute and the temp, lux and humidity reporting at 8 minutes, and that works well.
I've not had it long enough to speak to battery life, and I am using it plugged into power in any case. That is one of the great advantages of this unit, if installed in the right location you can plug it in to a mini-USB and never have to worry about batteries again.