35,99$
KOSTENLOSE internationale Rückgaben
Keine Vorauszahlung von Importgebühren und 11,44 $ Versand nach Österreich Details

Details zu Versand und Gebühren

Preis 35,99 $
AmazonGlobal-Versand 11,44 $
Geschätzte Anzahlung für Importgebühren 0,00 $
Summe 47,43 $

Lieferung Freitag, 27. Dezember
Oder schnellste Lieferung Montag, 16. Dezember. Bestellung innerhalb 7 Stdn. 16 Min.
Auf Lager
35,99 $ $ () Enthält ausgewählte Optionen. Inklusive erster monatlicher Zahlung und ausgewählter Optionen. Details
Preis
Zwischensumme
35,99 $ $
Zwischensumme
Aufschlüsselung der anfänglichen Zahlung
Versandkosten, Lieferdatum und Gesamtbetrag der Bestellung (einschließlich Steuern) wie bei der Bezahlung angezeigt.
Versand
Amazon
Versand
Amazon
Rückgaben
Rückgabefrist: bis 31. Januar 2025
Rückgabefrist: bis 31. Januar 2025
Für die Weihnachtssaison 2024 gilt: Artikel, die zwischen dem 1. November und dem 31. Dezember 2024 gekauft wurden, können bis zum 31. Januar 2025 zurückgegeben werden.
Rückgaben
Rückgabefrist: bis 31. Januar 2025
Für die Weihnachtssaison 2024 gilt: Artikel, die zwischen dem 1. November und dem 31. Dezember 2024 gekauft wurden, können bis zum 31. Januar 2025 zurückgegeben werden.
Zahlung
Sichere Transaktion
Deine Transaktion ist sicher
Der sorgfältige Umgang mit Ihren persönlichen Informationen ist uns sehr wichtig. Unser Zahlungssicherheitssystem verschlüsselt Ihre Daten während der Übertragung. Wir geben Ihre Zahlungsdaten nicht an Dritte weiter und verkaufen Ihre Daten nicht an Dritte. Weitere Informationen
Zahlung
Sichere Transaktion
Der sorgfältige Umgang mit Ihren persönlichen Informationen ist uns sehr wichtig. Unser Zahlungssicherheitssystem verschlüsselt Ihre Daten während der Übertragung. Wir geben Ihre Zahlungsdaten nicht an Dritte weiter und verkaufen Ihre Daten nicht an Dritte. Weitere Informationen
Hinzugefügt zu

Es ist ein Fehler aufgetreten.

Es gab einen Fehler beim Abrufen deines Wunschzettels. Versuche es noch einmal.

Es ist ein Fehler aufgetreten.

Liste nicht verfügbar.
Andere Verkäufer bei Amazon

Alden 4507P Grabit Micro Broken Bolt Extractor 4-teiliges Set – kleiner Bolzen- und Schraubenentferner – ideal für PC- und Mac-Reparatur – hergestellt in den USA

4,2 4,2 von 5 Sternen 940 Sternebewertungen

35,99 $
KOSTENLOSE internationale Rückgaben
Keine Vorauszahlung von Importgebühren und 11,44 $ Versand nach Österreich Details

Details zu Versand und Gebühren

Preis 35,99 $
AmazonGlobal-Versand 11,44 $
Geschätzte Anzahlung für Importgebühren 0,00 $
Summe 47,43 $

Zu einem günstigeren Preis bei anderen Verkäufern erhältlich, die eventuell keinen kostenlosen Prime-Versand anbieten.
{"desktop_buybox_group_1":[{"displayPrice":"35,99 $","priceAmount":35.99,"currencySymbol":"$","integerValue":"35","decimalSeparator":",","fractionalValue":"99","symbolPosition":"right","hasSpace":true,"showFractionalPartIfEmpty":true,"offerListingId":"3bbIv05v0gP5IGR9FUPb75Okoaz4CUr0Hx7ZbQDRN3DUPW%2BTeILPYHh%2BSoosXDsR1x3tUDa%2BU63OiOLAjyxwBShpKxnwzh8dHh5cdRtPE15hZNxItsuxHMLZNiu9B42ksGBgghgbcgREJ6l9ZPcnRgtP3B%2FIgJxdTXisQzwMAXL%2FIQlqmtO3jQ%3D%3D","locale":"de-DE","buyingOptionType":"NEW","aapiBuyingOptionIndex":0}]}

Kaufoptionen und Plus-Produkte

Material Legierter Stahl
Schnittdurchmesser 6,35 Millimeter
Oberflächentyp Stahl
Schafttyp Zylinderschaft
Marke ALDEN CORPORATION

Info zu diesem Artikel

  • Micro Grabit 4-teiliges Set enthält Schraubenausdreher kompatibel mit Pentalobe MacBook-Schrauben
Weitere Produktdetails
Hinweis: Produkte mit Elektrosteckern sind für den Einsatz in den USA konzipiert. Steckdosen und Voltzahlen sind je nach Land unterschiedlich. So ist für dieses Produkt möglicherweise ein Adapter oder Konverter erforderlich, damit es an Ihrem Zielort genutzt werden kann. Bitte prüfen Sie vor dem Kauf die Kompatibilität.

Wird oft zusammen gekauft

Dieser Artikel: Alden 4507P Grabit Micro Broken Bolt Extractor 4-teiliges Set – kleiner Bolzen- und Schraubenentferner – ideal für PC- und Mac-Reparatur – hergestellt in den USA
35,99$
Erhalte es bis Montag, 16. Dezember
Auf Lager
Verkauf durch Official-theGrabitStore, Lieferung durch Amazon Fulfillment.
+
32,49$
Erhalte es bis Montag, 16. Dezember
Auf Lager
Verkauf durch Official-theGrabitStore, Lieferung durch Amazon Fulfillment.
Gesamtpreis: $00
Um unseren Preis zu sehen, füge diese Artikel deinem Einkaufswagen hinzu.
Details
Zum Einkaufswagen hinzugefügt
spCSRF_Treatment
Wähle Artikel zum gemeinsam kaufen.

Du suchst nach bestimmten Informationen?

Kundenrezensionen

4,2 von 5 Sternen
940 weltweite Bewertungen
It worked and saved me from more complex repair
4 von 5 Sternen
It worked and saved me from more complex repair
I got some thread wrapped around a part in my Pfaff 130. Machine was jammed, so ok take it apart EXCEPT one screw was petty stripped and being soft stripped more, I tried the rubber band, etc and no luck. Then stepped away for a year. Order smaller collets for Dremel to hold smaller drills and finally hit on the right search term to find these. The Dremel doesn’t have a reverse and the grabits close to too big, so I used the Dremel with a tiny bit to drill hole then took the Grabit drill side in hand drill and it caught and the screw came out. Totally worth it to me to save the treads on the machine and avoid a more complex teardown. I also mess with pc, games systems, etc so am sure I will used again. One thing I don’t like is the card in the storage box just has barcode on back instead of directions so I cut directions off packaging, storage box is cheap but at least it has one
Vielen Dank für dein Feedback.
Leider ist ein Fehler aufgetreten.
Leider konnten wir die Rezension nicht laden

Spitzenrezensionen aus USA

Bewertet in den USA am7. Mai 2024
These worked perfectly for a screw I had that the head was stripped out of a screw used to mount the red dot on my Sig P365. Used one end to enlarge the stripped out hole then used the other end with my drill in reverse and the screw came right out. It was SO worth the purchase price.
3 Personen fanden diese Informationen hilfreich
Melden
Bewertet in den USA am26. Oktober 2022
Used the 3mm size to remove a screw with a detached head from a G45 MOS slide. I reviewed the instructions and consulted YT and some forums for additional information. I was overly cautious at first and kept trying to use the extraction end before the hole in the screw was deep enough for the extractor to take hold. Anyone saying that the drill end of these do not work is incorrect. You have to make sure you are using the the drill in the reverse (counterclockwise) setting for BOTH the drilling and the extraction.
My client's options were very limited as the screw was only about 1 - 1.5 mm proud of the slide, had consulted with some expert pistol-smiths and confirmed there were very few options, the suggestions of course, flooded in, cut a slot in the screw and use a regular screwdriver (not enough meat on the screw shaft/not enough room; solder something to it and use that to unscrew it (maybe, but that would have to be an amazing solder job) Or get this device and in 20 minutes (should have been about 7, overly cautious) and the screw was out, no marring on the slide, no damage to the internal threads! Excellent bit of kit, won't use it often, but when you need it, you NEED it.
10 Personen fanden diese Informationen hilfreich
Melden
Bewertet in den USA am21. November 2024
Tried to replace the SSD of a HP Victus Laptop and the screws were so tight that I managed to destroy their heads. Bought this after watching a video on YouTube and this worked so fine.
Don't worry if it doesn't work on the first try. Just try with a bigger bit and it will work.
Bewertet in den USA am28. Mai 2019
Updated again - I never received the promised replacement bit. So have to go with my original assessment. The bit broke while attempting to extract a very soft screw. I can't recommend the product. While I was initially impressed with their quick reply and willingness to replace the broken bit, that was a month ago and the replacement has not arrived.

Updated Review: The seller replied very quickly and is sending a replacement for the broken bit. Based on that and success using the other bits on a different screw, I'm upgrading to 4 stars for the quick customer service and the fact the bit worked on another screw without issue.

Tried to use it to remove a pickguard screw on a guitar. These are not hard metal, not stainless, they strip very easily. In this case though, the cutting end of the smallest bit broke very quickly and without actually accomplishing the task. I understand that stuff like that happens, so may adjust this pending the sellers response. Also - the tip shearing off like that result in the guitar being damaged - fortunately, the damaged area is under the pickguard as it skipped off to the side of the screw in that direction instead of out into the visible part of the guitar, otherwise I'd be even more furious.
8 Personen fanden diese Informationen hilfreich
Melden
Bewertet in den USA am15. Juni 2024
I got some thread wrapped around a part in my Pfaff 130. Machine was jammed, so ok take it apart EXCEPT one screw was petty stripped and being soft stripped more, I tried the rubber band, etc and no luck. Then stepped away for a year. Order smaller collets for Dremel to hold smaller drills and finally hit on the right search term to find these. The Dremel doesn’t have a reverse and the grabits close to too big, so I used the Dremel with a tiny bit to drill hole then took the Grabit drill side in hand drill and it caught and the screw came out. Totally worth it to me to save the treads on the machine and avoid a more complex teardown. I also mess with pc, games systems, etc so am sure I will used again. One thing I don’t like is the card in the storage box just has barcode on back instead of directions so I cut directions off packaging, storage box is cheap but at least it has one
Kundenbild
4,0 von 5 Sternen It worked and saved me from more complex repair
Bewertet in den USA am15. Juni 2024
I got some thread wrapped around a part in my Pfaff 130. Machine was jammed, so ok take it apart EXCEPT one screw was petty stripped and being soft stripped more, I tried the rubber band, etc and no luck. Then stepped away for a year. Order smaller collets for Dremel to hold smaller drills and finally hit on the right search term to find these. The Dremel doesn’t have a reverse and the grabits close to too big, so I used the Dremel with a tiny bit to drill hole then took the Grabit drill side in hand drill and it caught and the screw came out. Totally worth it to me to save the treads on the machine and avoid a more complex teardown. I also mess with pc, games systems, etc so am sure I will used again. One thing I don’t like is the card in the storage box just has barcode on back instead of directions so I cut directions off packaging, storage box is cheap but at least it has one
Bilder in dieser Rezension
Kundenbild Kundenbild Kundenbild
KundenbildKundenbildKundenbild
5 Personen fanden diese Informationen hilfreich
Melden
Bewertet in den USA am8. August 2024
Mechanic review: So i never have my expectations up that high with bolt extrators. The tiny screw on my gearwrench ratchet had the head rounded off. This thing worked like a charm. Well worth it.
Bewertet in den USA am28. April 2024
Very happy with my purchase. I repair vintage toys/electronics and it’s very clear, that most parents were using micro Phillips instead of a #0 or #1 Phillips bc the screws get pretty bad- as the fate of a valuable one rested in my hands, I scoured amazon for the right solution. These are the perfect size for smaller screws and are good quality (glad I didn’t go with the cheap ones). First time using this, I was super bummed that it didn’t even budge the sucker, but luckily I decided to try the extractor end a size up from the drill bit- it hasn’t failed me yet.

Now they aren’t a magical solution, so you’ll still need to set yourself up for success by using a penetrating oil/lubricant like WD-40… just be aware that if you’re using it on a painted item (like I do sometimes), that the WD-40 will dissolve the paint so be careful to apply it precisely. And of course be sure your applying firm downward pressure and keeping your drill in reverse for the duration. Stripped screw removal is part science, part art form in my opinion. Every one is is a little different. But this has been a nice trump card for me so far after I’ve tried some less extreme options- at least for my application. Your mileage could vary depending on material or method, but seriously, use the next size up in extractor before throwing in the towel- makes the tool just a bit more effective.
2 Personen fanden diese Informationen hilfreich
Melden

Spitzenrezensionen aus anderen Ländern

Alle Rezensionen ins Deutsche übersetzen
tou tou
5,0 von 5 Sternen livraison rapide
Bewertet in Kanada am 24. März 2024
Mike
1,0 von 5 Sternen Breaks too easily
Bewertet in Großbritannien am 22. August 2022
Broke two of these on first use, have also used a Sealy kit which is cheaper and works. This is expensive and too weak
user-M4P146
4,0 von 5 Sternen حجمها صغيرجدااا
Bewertet in Saudi-Arabien am 15. März 2022
وصلت سريعا
Michael
3,0 von 5 Sternen Grabless
Bewertet in Australien am 30. März 2024
This product did not drill into bolt when I drilled with a normal drill bit the grabber broke under pressure
Amazon Customer
5,0 von 5 Sternen Best in class
Bewertet in Kanada am 15. Januar 2021
These extractors are the best I have used. Not extremely durable, but reliable. I have used a lot of different types and these are really good.