3 new from $65.00

Have one to sell? Sell on Amazon

Altocraft USA WR-LS58 Torque Multiplier Lug Nut Wrench

4.4 out of 5 stars 20 customer reviews

Available from these sellers.
    This fits your .
  • Enter your model number to make sure this fits.
  • High Powered Lug Nut Wrench makes changing tires a breeze!
  • Made of Strong Alloy Steel that will last
  • Perfect for Cars, Trucks and RV's!
  • Trans-Speed Ratio: 1:58 - Maximum Safe Output: 5800N/M
  • Set includes: 1 inch driver and 32mm and 33mm deep impact socket
3 new from $65.00

Product Description

Altocraft's Torque Multiplier Lug Nut Wrench is a high powered wheel wrench that will make changing tires on any car, truck, or rv painless. This Torque Lug Nut Wrench features a highly durable alloy steel which is tried and tested to last and by using less labor to reach a sufficient output torque this wrench gun is easy to use and efficient. Set includes a 1 inch driver and 32mm and 33mm deep impact socket.

Product Information

Technical Details

Part Number WR-LS58
Item Weight 52 pounds
Product Dimensions 15 x 7.5 x 4 inches
Item model number WR-LS58
Size full size
Color Bronze
Item Package Quantity 1
Measurement System Metric
Included Components Electric Torque Wrench
Batteries Required? No

Additional Information

ASIN B01FS8J3EW
Customer Reviews
4.4 out of 5 stars 20 customer reviews

4.4 out of 5 stars
Best Sellers Rank #178,994 in Home Improvements (See top 100)
#79,916 in Electronics > Accessories & Supplies > Cell Phone Accessories
#195,865 in Electronics > Cell Phones & Accessories
Shipping Weight 53 pounds
Date First Available March 15, 2012

Warranty & Support

Product Warranty: For warranty information about this product, please click here

Feedback

Would you like to give feedback on images?
Would you like to tell us about a lower price?

Customer Questions & Answers

Customer Reviews

Top Customer Reviews

By A. Bouchelle on December 3, 2012
Verified Purchase
This is a really cool tool. I work at an engineering firm and we very often have to remove large rusty nuts. I have used this to take off 1 1/2" nuts that I couldn't get off with a monkey wrench and a 4' pipe. I broke the monkey wrench.

The only challenge was anchoring the arm. I ended up using flat steel to wedge in it and stop the arm from moving.The steel wedges between the socket and the arm and whatever else you can use to anchor to. Doing this scratched the socket some but considering they are extra thick to withstand the 8000FtLbs. of torque, this is no problem to the socket. You will need 1" drive sockets. They are huge.

I normally would use a 3/4" drive and sockets to remove most of the bolts I come in contact with. This most recent trip I stripped out a spud wrench and broke a monkey wrench. I also bent a flat wonder bar in half. I figure I needed something with a lot of power. This is that tool. It will either break the nut loose or break the bolt off.

This tool has a very slow action so its not a tool that will go squirrely on you. Every 58 turns from the handle equal 1 turn from the socket. Very slow but extremely powerful!!! This thing broke loose rusted nuts on 1" bolts that had been there for 20 years. Like i said before I broke a monkey wrench with a 4' Pipe that I was trying to turn them off with. The only caution I can say is if you use a piece of steel or something else to stop the are be wary that you will exude an extreme amount of force on whatever you anchor to. It may break and shatter toward you so be careful.

The only improvement I can suggest would be to add a way for the sockets to not fall off. There are no locking bearings on this so when you pick it up the sockets fall off.
Read more ›
1 Comment 7 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
The tool works great for the money. A few precautions though. If using on over tightened lug nuts like the old style Bud semi truck wheels, heat the nuts with a torch first. This tool is designed to be turned ONE HANDED. If you have to use two hands they are too tight. The tool is so strong you will snap off the studs.
The machining on the inside where the gears are is very poor, sloppy and primative. As soon as you get it take off the large snap ring and grease the heck out of it. Mine came almost dry. The rubber handle grip will disintegrate on you so wear good gloves.
This tool, if greased properly, is worth the money even if only used a few times for emergencies. It will save you a $100.00 service fee to get a tire changed. If mine breaks I will definitely buy another one.
Comment 4 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I have yet to use this in a true high-torque situation, but build quality seems to be OK, but nothing to really write home about, either good or bad. I question the torque rating, as it doesn't seem stout enough to take the 2000+ foot pounds advertised, but so far I haven't bent or broken anything on it, and the gear reduction system can build up a lot of torque fairly easily. Just be sure the 'foot' is against something that is OK if it gets scratched a bit, and won't easily bend/break.
Comment 2 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
INSIDE PLASTIC CASE IS NOT STRONG ENOUGH FOR WEIGHT OF TOOL IN IT, THUS IT CRACKS. THE RUBBER HANDLE ON THE CRANK HANDLE SLIDES OFF CRANK WHEN USING, IT NEEDS TO BE SECURED BETTER. ( IT NEEDS TO BE GLUED ON) THE TOOL DOES WORK GOOD AND DOES TAKE LUG NUTS OFF SEMI TRUCKS. I HAVE CHANGED FOUR TIRES ALREADY. I HAVE BOUGHT A SECOND ONE AND BOTH TOOLS HAVE CRACKED INSIDE CASES AND THE RUBBER SLIDES OFF THE HANDLE.
Comment 3 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
It works very well on RVs exept for the fact that neither provided socket fits the 1 1/8 lug nuts and you'll play hell finding one in 1 inch drive. I ended up using an adapter and 3/4 drive socket which makes it too long so I use another socket on the adjacent lug for the brace leg to bind against to get the leverage you need
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
it works, takes one hand brakes loose lugs put on with 1 inch air gun, makes things easy on the side of the road or at home.
Comment 2 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
different than the one previously purchased but it still does the job for my husband's semi truck and trailer some adjustments needed for the heavy duty
Comment One person found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
This thing is amazing! With very little effort it will take off even big truck lug nuts.
Comment One person found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse