American Dryer Advantage automatic hand dryer uses a one-piece steel cover with black graphite epoxy finish. It dries hands in an average of 25 seconds. An automatic infrared sensor allows the dryer to run for 35 seconds or until hands are removed from under the sensor. The new Advantage series can be connected to any voltage from 100 - 240 volts, 50/60Hz. The dryer configures itself to your voltage, making installation easier. Tamper resistant screws secure cover to base. Air intake vents are shielded for additional safety. Heavy duty universal motor. 1/8 HP, 4,800 RPM. Automatic thermal protector. Ultra energy efficient microprocessor-controlled sensor turns dryer on when hands are under the outlet for up to 35 seconds. Stand by power is only one watt. RoHS compliant lead-free design. Constructed of NiChrome resistance wire with thermal protector. Heating element operates in the black range for maximum life. Advantage Series hand dryers achieve up to a 95 percent cost savings over paper towels. These savings are realized by eliminating the maintenance and operating expenses associated with paper or linen towels. 180 CFM (cubic feet per minutes) air flow. 7,300 LFM (linear feet per minutes) air velocity. 120 degrees F at 72 degrees F Ambient air temperature. 67dB (Quietest in its class) sound level. Measures 5-5/8-inches length by 10-1/8-inches width by 9-3/8-inches height.