|Processor||1 GHz ARM 7100|
|Hard Drive||4 GB|
AntMiner S9 ~13.5TH/s @ 0.098W/GH 16nm ASIC Bitcoin Miner
|Price:||$5,714.99 & FREE Shipping|
- Enter your model number to make sure this fits.
- Hash Rate: 13.5TH/s ±7%
- AntMiner APW3 power supply recommended only if you have 205v-264v outlet.
- Power Consumption: 1323W ±7% (Power supply not included)
- Built-in web management portal. No separate host computer required.
- Most Power Efficient Miner in Existence: 0.098 J/GH ±7%
Customers who viewed this item also viewed
What other items do customers buy after viewing this item?
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
S9 Specifications: 1. Hash Rate: 13.5TH/s ±5% 2. Power Consumption: 1323W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.098 W/GH ±10%(at the wall, with APW3, 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. ASIC Chip: BM1387 6. Dimensions: 350mm(L)*135mm(W)*158mm(H) 7. Cooling: 2x 12038 fans 8. Operating Temperature: 0 °C to 40 °C 9. Network Connection: Ethernet 10. Frequency automatically set Please note the following: 1. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 3. Power supply unit is not included. Bitmain recommends the APW3 only if you have a 205-264v outlet, for voltages lower than 205v please use the EVGA 1600 g2 instead.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
It is heavy and delicate at the same time, but sounds like a jet. This is for commercial-grade hashing. If you want to hash quietly in the home or have environmental factors, one may want to consider the R4. Forum posts have referred to these as "wife-busters". This machine does belong within a server room type setting. One may want to consider learning on an older model because there is a little bit of technical knowledge needed.
It's pointed at the 20+ PH/s PPLNS KanoPool in the USA and is working as expected.