Adjust your Z-offset!!
The majority of the negative reviews for this printer seem to boil down to miscalibrated Z-offset. Follow the instructions in the instructions booklet for this after assembly, and make sure you set your voltage on the back of the machine appropriately for your region before firing it up for the first time.
Additional notes:
• The included Cura profile is subpar and has a 6mm retraction distance where it should be set to 1mm. I strongly recommend searching for "sclebo kobra neo github" and downloading his profile for your chosen slicer; I've been getting consistently great results with his settings.
• If you're having adhesion issues, wash and level your bed! I've never needed to use glue sticks or any other kind of binding agent with the stock PEI bed; a good wash (soap + water + microfiber cloth) and a good level should get you good results, at least with PLA.
• Don't forget to re-set your Z-offset after leveling! I usually run leveling every time I have to remove and reattach the plate; the firmware will reset your Z-offset to 0 after the leveling operation, and you'll have to get that back to where you had it.
• Check your Z-axis gantry; my right side was too loose out of the box and was visibly unlevel, and I initially overtightened it to the point that it would lag behind the left side as the Z axis moved up. There's a blurb on this in the booklet; you really should read the booklet back to front.
With the above points in mind, I've been able to operate this printer for months without any kind of maintenance required. I get consistent prints with great first layers; I'm frankly shocked at how consistent this printer has been for the price I paid. Strong recommendation; the Kobra Neo is genuinely a hidden gem of a bed-slinger and a great introductory printer for beginners and seasoned experts looking for a budget addition to their printer inventory.
This bundle contains 2 items (may ship separately)
(286)
- 【90% Pre-installed Make It Easy】 Anycubic Kobra Neo is a 90% Pre-installed 3D Printer, which make it possible to set up within 10 minutes. It can print perfectly right out of the box and this would make any beginner to be a great printer enthusiast, which is more suitable for beginners than other DIY 3D Printers.
- 【Direct Drive Extruder Make It Precise Control】 The Direct Drive Extruder realizes smooth feeding and discharging of flaments and compatible with more flexible filament such as TPU/PLA/ABS/PETG. It is more lighter, features less inertia and more precise printing, can restore the form of the model to the greatest extent.
- 【PEI Spring Steel Platform Make It Easy Removal & Cost Saving】 Compared with other FDM 3d printers, double-sided magnetic PEI spring steel platform is more durable and lasts longer, saving a lot of maintenance costs. You can remove the model easily.
- 【25-Point Auto Leveling Make It Smart】 Simple operation brings precise detection and fast leveling, helps you from the tedious manual leveling greatly.
- 【34.4% Larger Creation Dimension Make It Large】 Compared to the last generation Anycubic Mega S, the printing volume of Anycubic Kobra Neo has increased by 34.4% to reach 12.1 liters. The printing dimension is 250x 220x 220mm, equivalent to the size of a standard Size 5 soccer ball
- 【More Function】 ①Make It Fast: Anycubic Kobra Neo 3d prints at a recommended typical speed of 50-60mm/s and reaches 100mm/s at its highest, which will save much time; ②Make It Smart: The standard power outage resuming sensor and the optional filament run-out sensor reduces filament waste and save time by avoiding the printing failure caused by the power outage and lack of filament.
- 【Customer Services】 ANYCUBIC FDM 3d printers come with one-year warranty(The print head with 3 months, the heated bed with 6 months) and lifetime technical support. If you have any question on Anycubic Kobra Neo 3d printer, just click "Ask a question" through our page, we will fast respond within 24 hours
(6,401)
- 【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- 【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- 【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- 【𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲】 Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 【𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
Frequently purchased items with fast delivery
Page 1 of 1 Start over
Product information
| ASIN | B0BGZCDLB3 |
|---|---|
| Customer Reviews |
4.6 out of 5 stars |
| Date First Available | October 1, 2022 |
| Manufacturer | ANYCUBIC |
Feedback
Excellent low-hassle budget printer
Adjust your Z-offset!! The majority of the negative reviews for this printer seem to boil down to miscalibrated Z-offset. Follow the instructions in the instructions booklet for this after assembly, and make sure you set your voltage on the back of the machine appropriately for your region before firing it up for the first time. Additional notes: • The included Cura profile is subpar and has a 6mm retraction distance where it should be set to 1mm. I strongly recommend searching for "sclebo kobra neo github" and downloading his profile for your chosen slicer; I've been getting consistently great results with his settings. • If you're having adhesion issues, wash and level your bed! I've never needed to use glue sticks or any other kind of binding agent with the stock PEI bed; a good wash (soap + water + microfiber cloth) and a good level should get you good results, at least with PLA. • Don't forget to re-set your Z-offset after leveling! I usually run leveling every time I have to remove and reattach the plate; the firmware will reset your Z-offset to 0 after the leveling operation, and you'll have to get that back to where you had it. • Check your Z-axis gantry; my right side was too loose out of the box and was visibly unlevel, and I initially overtightened it to the point that it would lag behind the left side as the Z axis moved up. There's a blurb on this in the booklet; you really should read the booklet back to front. With the above points in mind, I've been able to operate this printer for months without any kind of maintenance required. I get consistent prints with great first layers; I'm frankly shocked at how consistent this printer has been for the price I paid. Strong recommendation; the Kobra Neo is genuinely a hidden gem of a bed-slinger and a great introductory printer for beginners and seasoned experts looking for a budget addition to their printer inventory.
Top reviews from the United States
There was a problem filtering reviews. Please reload the page.
- Reviewed in the United States on April 11, 2023
Adjust your Z-offset!!
The majority of the negative reviews for this printer seem to boil down to miscalibrated Z-offset. Follow the instructions in the instructions booklet for this after assembly, and make sure you set your voltage on the back of the machine appropriately for your region before firing it up for the first time.
Additional notes:
• The included Cura profile is subpar and has a 6mm retraction distance where it should be set to 1mm. I strongly recommend searching for "sclebo kobra neo github" and downloading his profile for your chosen slicer; I've been getting consistently great results with his settings.
• If you're having adhesion issues, wash and level your bed! I've never needed to use glue sticks or any other kind of binding agent with the stock PEI bed; a good wash (soap + water + microfiber cloth) and a good level should get you good results, at least with PLA.
• Don't forget to re-set your Z-offset after leveling! I usually run leveling every time I have to remove and reattach the plate; the firmware will reset your Z-offset to 0 after the leveling operation, and you'll have to get that back to where you had it.
• Check your Z-axis gantry; my right side was too loose out of the box and was visibly unlevel, and I initially overtightened it to the point that it would lag behind the left side as the Z axis moved up. There's a blurb on this in the booklet; you really should read the booklet back to front.
With the above points in mind, I've been able to operate this printer for months without any kind of maintenance required. I get consistent prints with great first layers; I'm frankly shocked at how consistent this printer has been for the price I paid. Strong recommendation; the Kobra Neo is genuinely a hidden gem of a bed-slinger and a great introductory printer for beginners and seasoned experts looking for a budget addition to their printer inventory.
Images in this review
- Reviewed in the United States on June 5, 2023
- Reviewed in the United States on April 24, 2023
- Reviewed in the United States on May 20, 2023
