0 items added

To add items, choose from the table below

Image is representative of the product family. Select individual products in the table below for more specific images and product specifications

Apollo 95-200 Series Bronze Stop And Waste Ball Valve, Two Piece, Inline, Lever, Solder End

Available in multiple versions


Price: $18.96 - $31.54
Product Specifications
Brand Name Apollo Valve
Material Type Bronze
Maximum Pressure 400  PSI
LowerTemperature Range -50  Degrees Fahrenheit
Upper Temperature Range 500  Degrees Fahrenheit
Specification Met WW-V-35C
System of Measurement Inch
Ball Material Type Brass
Connector Type Solder End
Construction Type Full Port
Handle Type Lever
Internal Packing Material Type MPTFE
Manufacturer Series Number 95-200
Operation Mode Manual
Shape Inline
Structure Description Two Piece
Style Name Solder
UNSPSC Code 40141607

Currently showing 1-2 of 2
ASIN
The Amazon Standard Item Number (ASIN) uniquely identifies the item in the Amazon catalog.
Overall Length Part Number Number of Items Price Quantity
   
B006G060KW 4.12 inches 95-204-01 1
$22.83
B006G0633Q 4.43 inches 95-205-01 1
$29.90
Currently showing 1-2 of 2
Could not load your selection

We're sorry. An error occured when we tried to load your product family table. Rest assured, we're working to resolve the problem as soon as possible. Please refresh the page.


Special Offers and Product Promotions

  • Working on a home project? Need some help? Check out Amazon Home Services and get $30 cash back when you book select services. Learn more


Product Features

  • Made of bronze for higher strength and corrosion resistance than brass
  • Zinc-plated steel lever handle with vinyl sleeve for manual on/off control
  • Stop and waste (or drain) design to prevent water lines from freezing
  • Full port flow for higher operating efficiency than standard port
  • Solder end connections on both ends for a semi-permanent connection to tubing

Product Description

The Apollo 95-200 series bronze inline stop-and-waste (or drain) ball valve has a lever handle and solder end connections on both ends. It is made of bronze for higher strength and corrosion resistance than brass, and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. This valve has a drain with cap to allow the draining of water beyond the valve shut off point to prevent winter freezing of the water line. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. It has solder ends for semi-permanent yet reversible connections to tubing. The reinforced polytetrafluoroethylene (RPTFE) seats reduce the risk of leakage, and the drain cap has a seal to prevent fluid loss. The maximum pressure rating is 400 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG), and the temperature range is -20 to 450 degrees Fahrenheit. This ball valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.

Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.


Product Details

  • Shipping Information: View shipping rates and policies
  • Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
  • International Shipping: This item is not eligible for international shipping. Learn More
  • ASIN: B006G1RZEG
  • Product Warranty: For warranty information about this product, please click here

Customer Questions & Answers

Customer Reviews

There are no customer reviews yet.
5 star
4 star
3 star
2 star
1 star
Share your thoughts with other customers

Pages with Related Products. See and discover other items: ball valve