| Standing screen display size | 2 Inches |
|---|---|
| Processor | Tegra |
| Wireless Type | Infrared |
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Frequently bought together
$9.99
Get it as soon as Friday, Jan 26
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
From the brand
Product Description
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Raspberry Pi camera module 3 | RPi Wide Angle Camera Module 3 | RPi Camera with CS-Mount Lens | RPi Camera with M12 Lens | RPi Fisheye Camera | RPi Mini Camera | |
| Sensor | IMX708 | IMX708 | OV5647 | OV5647 | OV5647 | OV5647 |
| Lens | Autofocus | Autofocus | CS-Mount Lens | M12 Lens | M12 Lens | Fixed Focus Lens |
| FoV | 75°(D)x66°(H)x41°(V) | 120°(D)x102°(H)x67°(V) | 101°(H) | 130° (D) × 100° (H) | 220°(H) | 2×1.33m at 2 m |
| Frame Rate | 1080p50, 720p100, 480p120 | 1080p50, 720p100, 480p120 | 30fps@1080p | 30 fps@1080p , 60fps@720p , 90fps@480p | 1080p@30fps, 720p@60fps, 480p@90fps | 30fps |
| Resolution | 12MP | 12MP | 5MP | 5MP | 5MP | 5MP |
| Main Features | With Camera Case | Wide Angle | Visible Light/interchangeable lens | Built-in Motorized IR Cut filter | Fisheye/Integral IR filter | Mini-sized with Flex Cable |
Reviews with images
All Photos
Works well, a worthy alternative to the official PiCam
I bought this to save money; $13 versus whatever the PiCam was at the time seemed like a good deal to me, as I only intended to use it to monitor my 3D printer and make sure nothing catastrophic was happening while I was away.It has exceeded my expectations. Setup was easy, and the quality of the camera's picture is as good as the PiCams I've seen in this range. Like all these cameras, their ability to focus is not great, and once that focal length is set it does not change automatically, but it can get the job done assuming the subject isn't moving towards or away from the camera often.I attached a picture taken from the camera via a web-based remote monitoring service; this is of my printer bed, with the lights in the room off. For reference, the only light source is a 2ft strip of 300k LEDs positioned about 12" from the bed surface.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on February 4, 2019
It has exceeded my expectations. Setup was easy, and the quality of the camera's picture is as good as the PiCams I've seen in this range. Like all these cameras, their ability to focus is not great, and once that focal length is set it does not change automatically, but it can get the job done assuming the subject isn't moving towards or away from the camera often.
I attached a picture taken from the camera via a web-based remote monitoring service; this is of my printer bed, with the lights in the room off. For reference, the only light source is a 2ft strip of 300k LEDs positioned about 12" from the bed surface.
Size: OV5647 camera moduleVerified Purchase
Works well, a worthy alternative to the official PiCam
Reviewed in the United States on February 4, 2019
I bought this to save money; $13 versus whatever the PiCam was at the time seemed like a good deal to me, as I only intended to use it to monitor my 3D printer and make sure nothing catastrophic was happening while I was away.Reviewed in the United States on February 4, 2019
It has exceeded my expectations. Setup was easy, and the quality of the camera's picture is as good as the PiCams I've seen in this range. Like all these cameras, their ability to focus is not great, and once that focal length is set it does not change automatically, but it can get the job done assuming the subject isn't moving towards or away from the camera often.
I attached a picture taken from the camera via a web-based remote monitoring service; this is of my printer bed, with the lights in the room off. For reference, the only light source is a 2ft strip of 300k LEDs positioned about 12" from the bed surface.
Images in this review
Reviewed in the United States on February 17, 2023
EDIT 3/3/23: Their support messaged me and solved my problem!..... (It's been a couple of weeks and good amount of prints later!)....They advised to use pliers to turn the face of the camera, but be careful not to loosen it so much that it falls off and don't scratch the lens while using pliers........ On the other hand if you use a 3D printer then you can print the tool yourself, thus avoiding the risks above!!.... Search for "raspberry pi camera focus tool 3d print". So I'm upping my previous one star rating to a five star rating and also saying that I would buy this camera again now that I know how to focus it! Sorry for the misunderstand, thank you for your Support!
Size: OV5647 camera moduleVerified Purchase
This is my 2nd Camera and still no Focus on my prints
Reviewed in the United States on February 17, 2023
This is my second camera, thinking the first was broken, but there is no manual focus and my image is blurry and so I give this 0 STARS!Reviewed in the United States on February 17, 2023
EDIT 3/3/23: Their support messaged me and solved my problem!..... (It's been a couple of weeks and good amount of prints later!)....They advised to use pliers to turn the face of the camera, but be careful not to loosen it so much that it falls off and don't scratch the lens while using pliers........ On the other hand if you use a 3D printer then you can print the tool yourself, thus avoiding the risks above!!.... Search for "raspberry pi camera focus tool 3d print". So I'm upping my previous one star rating to a five star rating and also saying that I would buy this camera again now that I know how to focus it! Sorry for the misunderstand, thank you for your Support!
Images in this review
Top reviews from other countries
Alex Toth
Nice Product and Worked as intended
Reviewed in Canada on November 22, 2023Size: OV5647 camera moduleVerified Purchase
Mumble-Mumble
Works well for Octoprint. Image quality is a bit soft.
Reviewed in Canada on March 17, 2021Size: OV5647 camera moduleVerified Purchase
Mumble-Mumble
Reviewed in Canada on March 17, 2021
Primarily using the camera with Octoprint to monitor 3D printing progress. Installs easily - ribbon cable is a bit short, but I've mounted the camera and the Rpi together on an arm to the printer.
Image is a bit soft regardless of focal distance - everything isn't super sharp regardless of distance to the lens. So don't expect being able to read license plates or words with this camera. For my application of monitoring 3D prints, it serves its purpose.
All in all pretty satisfied. A little more expensive that other 3rd party camera modules, but the Arducam came packaged nicely in a small box, sealed in an anti-static bag, and worked on the first pass.
Images in this review
William Mitchell
Not the greatest image quality but works for what I need
Reviewed in Canada on June 26, 2021Size: OV5647 camera moduleVerified Purchase
William Mitchell
Reviewed in Canada on June 26, 2021
The cable is also a tad too short and I had to get an extended cable to mount this where I needed it.
Images in this review
JLM
Died about a day into use
Reviewed in Canada on December 13, 2023Size: OV5647 camera moduleVerified Purchase
