| Brand | ArmorSuit |
|---|---|
| Item model number | B004RDWVUS |
| Item Weight | 4.1 ounces |
| Product Dimensions | 12 x 2 x 2 inches |
| Item Dimensions LxWxH | 12 x 2 x 2 inches |
| Manufacturer | ArmorSuit |
| ASIN | B004RDWVUS |
| Country of Origin | USA |
| Date First Available | April 28, 2011 |
ArmorSuit MilitaryShield - Apple iPad 4 with Retina Display / iPad 3 / iPad 2 Screen Protector Shield + Lifetime Replacements
Enhance your purchase
| Compatible Devices | Apple-ipad-4, Apple-ipad-3, Apple-ipad-2 |
| Compatible Phone Models | Apple iPad 3, Apple iPad 2, Apple iPad 4 |
| Brand | ArmorSuit |
| Item Dimensions LxWxH | 12 x 2 x 2 inches |
About this item
- Make sure this fits by entering your model number.
- Compatibility - Specifically designed for Apple iPad 4 with Retina Display / iPad 3 with Retina Display / iPad 2 & Work Perfectly with Smart Cover
- Optically clear & Non-sticky outer surface
- Self-healing, Military grade material engineered for your specific device
- Reduces Grease & Fingerprint, Scratch Proof Protection & Abrasion, erosion, scratch, puncture, and impact resistant
- ArmorSuit Lifetime Replacement Warranty *Made in the USA*
Buy it with
Recommended from our brands
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you are posting in the form of a question.
Please enter a question.
Product information
Technical Details
Additional Information
| Customer Reviews |
4.4 out of 5 stars |
|---|---|
| Best Sellers Rank | #3,011 in Tablet Screen Protectors |
Warranty & Support
Feedback
Product Description
This kit includes: MilitaryShield for your device, installation card, application solution, micro-fiber cloth, detailed instructions manual & ArmorSuit Lifetime Replacement Warranty.
ArmorSuit-MilitaryShield is extremely transparent and formulated against UV for anti-yellowing, in order to protect your device. ArmorSuit-MilitaryShield is made from the same protection film material used to protect military aircrafts, helicopters and space shuttles. MilitaryShield also equipped with "self-healing" technology to further extend the protection. The self-healing technology will eliminate minor scratches on the film over period of time. Our MilitaryShield has also been precisely cut to provide perfect fitting invisibly protect your device. You can relax and stop worrying about permanent scratches on your device because our MilitaryShield provides you a peace of mind to keep your device away from any scratches. ArmorSuit MilitaryShield features corrosion and moisture protection, it prevent moisture from migrating through film to attack underlying substrates.It also provides erosion and impact protection, it protect paint, plastics, metals and composites from sand, rock, rain, and debris damage. Also protects against general wear, rubbing, chaffing, abrading, scraping, etc.
How to Remove the MilitaryShield:
If you ever need to remove the ArmorSuit MilitaryShield, JUST PEEL IT OFF with your bare hands, it comes off clean and leaves NO sticky residue.
*Made in the USA*
Customer reviews
Reviewed in the United States on December 4, 2012
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Some people mentioned scratches not "healing", I will update this review if I find I have any issues with my screen protector in the future.
Zagg Invisible Shield - hated the feel - fingers dont' glide smoothly on the material
Zagg anti-glare - AWFUL - opaque shield really dimmed the screen and dampened the colors, absolutely crap in the sun, strange gritty feel
GreatShield - too thick and opaque, again cut down the screen's brilliance
knock-offs/store brands - every one I tried was junk
This shield, however, is terrific. Visually, I can tell it is even on - the screen has it's original brilliance and colors are amazing. The feel is unnoticeable...just like it should be. My fingers glide across the screen like they are on glass yet the material makes the iPad easier to hang on to since its not slick like glass, especially with the back protector in place.
I was a little upset with the back piece when I applied it since the corners didn't look like they were going to stay in place. I soaked them down with spray and smoothed them out and then just let the pad sit for a few hours. As the shield dried the corner tabs molded right in and are perfect now.
After installing 6 or 8 of these things now I think the key, besides finding the right product, is PROPER INSTALLATION.
INSTALLATION - I see a lot of people complaining about installation. I've installed 3 of these now with absolutely no trouble. Here's how:
1) Turn the iPad completely off
2) Clean the screen until it is COMPLETELY SPOTLESS and free of any debris, hair or fuzz. I used my eyeglass cleaning wipes and cloth.
3) Look at the screen from all angles and from different heights to MAKE SURE IT IS COMPLETELY CLEAN. This is imperative!
4) Find a wide open surface where you can work - preferably from a chair/stool
5) Lay down paper towel
6) Put iPad on paper towel
7) Mist your hands with the solution
8) Mist the iPad with solution - yes, the instructions say not to but I think they do that to reduce their liability. The step is KEY to simple install
9) Carefully peel off the shield and hold it by draping it over the palm of one hand, sticky side up.
10) Mist the sticky side of the shield. The shield and the iPad should be really wet.
11) Hold the screen by two corners and carefully position it over the iPad - don't worry if the positioning isnt perfect yet
12) When it is on the iPad you can now move it around to the perfect spot by carefully tugging on the corners.
13) Once you are happy with the location, take out the squeegee and start at one corner and work the solution and bubbles out across the iPad. Work in one general direction, smoothly and gently
14) Look for bubbles and work them out if you see any.
15) Don't be afraid to pull it off, re-spray the pad and shield and try again
16) When complete...let it sit for a couple of hours AT LEAST
I installed this last shield in about 90 seconds - this is not a difficult task. Use a lot of solution and be patient.
I use my iPad on the road, on construction sites and in all types of conditions. So far this one has held up the best although I've only had it on a couple of week. I'll post an update when I've had it on a couple of months.
*** UPDATE - May 21, 2012: I've been using the shield for 4 months now and it's still looking great. One corner is starting to curl up due to hundreds of trips in and out of my briefcase and the wear and tear of clicking in and out of my car mount. Other than that the protector looks and works great. My iPad gets a serious workout so I'm still thoroughly impressed with this cover. I even purchased one for my daughter for her new iPad3. I will definitely be purchasing another for mine. ***
*** UPDATE #2 - July 25, 2012: Well, it almost made it 6 months but I've snagged the corners too many times so I think it's time for a new shield. 95% of the front shield and 100% of the back shield still look great but two corners on the front are a little dog eared. This shield has certainly impressed me and exceeded my expectations. I will definitely be getting another one just like it.
*** UPDATE #3 - September 25, 2012: The time finally came to order a new shield and I did order another ArmorSuit (three actually) since I needed one and bought one for my wife and daughter for their iPads. Mine went on my iPad2 and the others on iPad3s - product still looks as good as ever. I can't imagine finding a better option but I'll certainly keep my eyes open and let you know if I find one.
I replaced my old screen protector with another ArmorSuit. Installation ain't the easiest but there are great YouTube videos and instructions included to help you along the way. My best advice is use plenty of the solution they include. After installation I was a little panicked. It looked cloudy and there were little micro bubbles everywhere that I couldn't get out with the card (though it worked perfect for the larger bubbles). I followed the instructions and waited 24 hours with my IPad turned off and then went back to check on it....all the bubbles had disappeared! I'm very happy to say that my iPad looks brand new again and I'm so happy to have put another ArmorSuit on it for 3+ years of protection more.

![[2Pack] ZenRich Tempered Glass Screen Protector for iPad 9.7 inch, zenrich iPad 6th/5th Generation/iPad Air 1/ iPad Air 2/iPa](https://images-na.ssl-images-amazon.com/images/I/612BM3R5gvL._AC_UL160_SR160,160_.jpg)
