|Item Weight||42.7 pounds|
|Product Dimensions||29.75 x 22 x 8 inches|
|Item model number||BV-RH-01|
|Is Discontinued By Manufacturer||No|
|Installation Type||Under Cabinet|
|Burner type||Stainless Steel|
|Airflow Displacement||750 Cubic Feet Per Minute|
|Material Type||Stainless Steel|
|Included Components||Stainless Steel Baffle Filters|
|Manufacturer Warranty||2 Year Warranty on Parts|
BV Range Hood - 30/36 Inch 750 CFM Under Cabinet Stainless Steel Kitchen Range Hoods, Dishwasher Safe Baffle Filters w/LED Lights, Ducted Kitchen Exhaust Fan Hood (30 Inch - 750 CFM/RH-01)
- Make sure this fits by entering your model number.
- Powerful Airflow 750 CFM Greatly Reduces Cooking Smoke and Grease - Dual motors with high airflow up to 750 CFM can take away most cooking smoke and grease. Leave your kitchen clean with fresh air.
- Provide Extra Lighting Aids in Prep Safety – With bright 2 watts Energy-Saver LED Lights, they will not only provide extra lighting to the space you cook in, but also aids in prep safety.
- Easy-to-Clean and Dishwasher Safe Baffle Filters - Featured 430 stainless steel baffle filters. They are easy to remove and dishwasher safe!
- Contemporary Design – Full body with 18 Gauge Stainless Steel Design provides a much modern look for your kitchen.Minimum Height Above Cook Top: 24 inches;Maximum Height Above Cook Top: 32 inches;Recommended Height About Cook Top: 27 inches to 30 inches.
- Worry-free Guarantee ETL Rated. 2-year Product Warranty Protected - Backed by BV 30 days Money Back Guarantee with 2 years warranty.
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you are posting in the form of a question.
Please enter a question.
What other items do customers buy after viewing this item?
Customers who viewed this item also viewed
Compare with similar items
Easy to Disassemble for Cleaning This BV range hood is a high airflow ducted unit with lights and stainless steel baffle filters. The entire range hood is designed with easy removal and cleaning of parts, without specialized tools required. Patented “SLANTED ” Design Slanted housing provides effective, quiet airflow and provides full coverage of the entire cooking surface the fan sits over. 750CFM High Power and 7.5 Sones Low Noise The range hood provides up to 750 CFM while only outputting 7.5 sones at max fan speed. Specifications : Exact Dimensions (L-W-H): 29-3/4" x 22-1/20" x 7-1/4" to 8-1/20" Materials: Brushed Stainless Steel / Sheet Metal Power Rating: 120V/60Hz (ETL Certified) Total Input Power: 174W Motor Input Power: 170W L Levels of Speed Control: 3-speed electronic button control Number of Motors: 2 Fan Type: Aluminum Motor Fan Filtration Type: Stainless steel baffle filters Illumination: 2x 2W LED lights Vent Shutter Opening Size: 6-1/4 ” Shop with confidence BV is continuously improving and evolving for our customer needs. Our goal is your 100% satisfaction.We offer every customer a limited 2-year product warranty on every item purchased
From the manufacturer
BV Kitchen Range Hood
Keep indoor Air Clean and Fresh.
About BV Home
BV offers a variety line of home improvement products and appliances in North America. BV is continuously improving and evolving for our customer needs.
BV Stainless Steel Range Hood for 30" & 36" Under Cabinet
High Power and Low Noise
The purpose of a range hood is to keep indoor air clean and fresh. The fan draws grease, smoke, smells, and steam up and out of your home reducing stains on paint and tiles, and improving the air you breathe.
BV range hood is a high airflow ducted unit with lights and stainless steel baffle filters. The entire range hood is designed with easy removal and cleaning of parts, without specialized tools required.
- Materials: Brushed Stainless Steel / Sheet Metal
- Power Rating: 120V/60Hz
- Number of Motors: 2
- Filtration Type: Stainless steel baffle filters
- 2 Models Available: 860 CFM, 900 CFM
Stainless Steel Baffle Filters - Dishwasher Safe
Forcing grease-saturated air to quickly and repeatedly change direction as it rises through the filter. The grease droplets end up condensing to the metal blades and then subsequently draining into the filter tray.
Dishwasher Safe. Easy to clean.
Minimum Height Above Cook Top: 24 inches;
Maximum Height Above Cook Top: 32 inches;
Recommended Height About Cook Top: 27 inches to 30 inches.
|30-inch Under-Cabinet Range Hood -860 CFM||36-inch Under-Cabinet Range Hood -860 CFM||30-inch Under-Cabinet Range Hood -900 CFM|
|Overall Size (WxLxH)||29.5" x 22.1" x 7.5"||35.25" x 21.38" x 8"||29.5" x 20" x 6"|
|Control Type||Push Button||Push Button||Push Button|
|Mounting Type||Under Cabinet||Under Cabinet||Under Cabinet|
|Airflow ( Cubic Feet per Minute)||860 CFM||860 CFM||900 CFM|
|Motor / Sound Level||Dual Motors, 3 Fan Speed / 7.5 Sones||Dual Motors, 3 Fan Speed / 7.5 Sones||Dual Motors, 4 Fan Speed / 7.5 Sones|
|Installation||Top Vent, 6" Duct Size / 3-prong plug||Top Vent, 6" Duct Size / 3-prong plug||Top Vent, 6" Duct Size / 3-prong plug|
|LED Lighting||2 Front, 2 watts||2 Front, 2 watts||2 Front, 3 watts|
|Fan Type||Steel Motor Fan||Steel Motor Fan||Aluminum Motor Fan|
|Filter Type||Stainless steel baffle filters (Dishwasher Safe)||Stainless steel baffle filters (Dishwasher Safe)||Stainless steel baffle filters(Dishwasher Safe)|
Customers who bought this item also bought
There was a problem filtering reviews right now. Please try again later.
On the note of the bent fans... Mine were VERY slightly bent, or better put, out of true. Sort of like if you hit a rock or curb and it throws your bike wheel off a bit. It is pretty easy to get them near perfect and "close enough" works for a quiet fan without vibration. Some of the vibration is also due to mounting. You should have a nice solid mounting for this and that brings me to that point... The mounting holes are very near the edges of this unit. My cabinets that I mounted them to have particle board bottoms that are MAYBE 1/4 inch thick. There was no way I was going to just screw into that even with smallish washers, no way... Also, the slots / holes in the unit, do not allow for decent sized screws (that said this comes with ZERO mounting hardware so expect a trip to the hardware store). If you wanted to just get hardware and go, you would be putting a good deal of faith in thin sheet metal and particle board. You may have nicer cabinets.. That said... I used a vibrating multi tool to deepen the slots my cabinet floors slid into so I could sneak 1.25" fender washers into, thus allowing the fan to grip the body of the cabinet (1/2 particle board). I used a slightly larger drill bit to make the slots in the hood for the screws a little wider so I didn't have to use very small screws. I also added plastic spacers between the unit and the floor of the cabinet so the bolt tension was not pulling on the sheet metal at all, but instead squeezing it firmly against the spacers and cabinet, forming a very solid connection. This made install a serious PAIN, but it was one I more or less expected. Again, expectations...
On the lighting issue, their customer service was AWESOME. I emailed about the lights being very dim, really only good as "night lights" and they mailed me a new set quickly. Ask and ye shall receive. The bad news is the replacements are maybe twice as bright, still not very bright, and still something a smidge bluer than daylight white. Oh well. They help fill out the light blocked by the hood and I'm not going to whine. I would DIY but the circuit that controls them only supports 2w, so this is really the best you can do without really getting in there and doing some modifications.
On the fan vibration issue, I found out the fix for that when I answered the follow up email they sent after helping me with the lights. Again, their customer service, for me anyway, was awesome. Thanks guys for that! It only took me about 15 minute to fix it by removing the filters, the oil cup, and the fan shroud come off with three little quick releases you twist 90 degrees then the shrouds pull down, rubber tubes come out of the housing, and they pull out. Hold you finger against the body of the fan blower assemble and fingertip very close to the rim of the fan blade (the smooth part) and turn the blade slowly until it contacts your finger. That is the high spot. Gently push inwards on that part and turn some more.. keep repeating this process until there is no, or nearly no, high spots... Spin it up on low speed and keep your fingers away while you quality check. Thing is, these blade are very thing. If they made them thicker it would mean more rotating mass which means bigger motors or slower fan speed up, and likely more wattage draw. So they can get a little wonky during shipping. I imagine these came from China, likely assembled, so all things considered it arrived in awesome shape... What is 15 minutes of work right? It's a $300 hood that rivals $1500 ones!
The next thing, and what I really love, is the power of this unit. Someone commented they are Indian and make stinky food... Love that! I am not Indian but I cook a lot, grill on my cast iron which always set off the smoke alarm (no longer!!!) and do make some aromatic foods. My house no longer smells like bacon all day Sunday (and hey if that's awesome just don't run it right??). While all this fantastic ventilation is happening, you CAN HOLD A CONVERSATION over by it, and I can have it on low sucking up the smells while I go sit down and watch a movie on the other side of my open concept kitchen / living room and it isn't bothersome! To put that in perspective, my crappy GE over the range microwave this replaced, was from 2007 and is that unit that like everyone and their mom and every apartment and hotel room has, only did 200 cfm on low and I think maybe 400 on high (but that is totally bogus!) and you couldn't talk anywhere near it because of how loud it was... I also love the timed shut off feature, just hit the button and walk away and it runs for like a minute or so then shuts itself down.
So all in all, I think this unit is a GREAT value for the money. I'm very pleased with its performance, nice modern unobtrusive appearance, BV's customer service, and I would highly recommend to anyone willing to spend a little time doing a good installation. Take some care, pay attention to the details, plan on this taking a few hours to really do right, and have a helper hold it while you get it mounted. Or, you know, buy a 1500 hood and pay someone a few hundred bucks to do it for you.
PS: I added some stainless sheet using epoxy to the inside parts of the cabinet prior to mounting and while I put up the backsplash in the picture. This not only really makes it look that much more pro but it will be way easier to clean. Just a project idea for you there... got the piece here on amazon for like $15 a side and only had to trim one inch off either one for a perfect fit.
FYI. This unit does not have a recirculate option and you need to vent it outside.
It pulls a lot of air. I don't have any return air specifically for this unit but it still works great. I am able to stir fry at high temps or deep fry without smoking out the house!
"We actually have brighter lights for you to replace. The new light that we are sending you is twice bright as the existing one."
I wonder why they only supplied 2 rubber rings to attach to the bottom and not 4 for the top too. It made it uneven so I opted out of using them. The sticker that comes off the front left some adhesive, so I had to use some Goo Gone to remove it.
This is definitely a two man installation, so if you're installing it yourself, plan for having someone help.
Top international reviews
We are not disappointed. It looks great. the 2 LED lights on the high setting is very bright. the low setting is quiet and still works great. the second setting is still quieter than our old one and the third setting is as loud as our old one but this is way more powerful.
When you read a review about how loud this a unit is it is relative to what type a unit the person had before. You can not fairly compare noise levels to a microwave oven hood. We were coming off a dual fan Nutone. Levels range from 47db (low) to 67db (high)
Customer service is great as I called and asked a few questions before purchasing as well as getting them to send a manual which they emailed right away.
A couple of minor negatives. One it is not a one person install. The 2 back screws are really difficult to get in. It's not finger print resistant and the button beep is a bit loud.
But this unit works great and is relatively quiet for the power it has.
So far so good and it felt good to have my Amazon purchase validated by our contractor. Used Prime so the delivery was pretty fast, which met our renovation time line.
Also: Warranty does not apply to Canada (USA only)