Baileigh metal working lathe is the perfect combination of size and power. This is a full cast iron base that is integrated into the main frame of the lathe, making this one of the most rigid lathes on the market. It is powered by a 7-1/2 hp motor and can turn rpms form 30 to 2000 through its 12 speeds. The metal working lathe is built to withstand years of use in any metal working shop and features precision ground and hardened ways. The lathe comes standard with a factory installed Mitutoyo DRO (digital read out) for making precise cuts, halogen light, a three jaw chuck, steady rest and follow rest. Speed: 30-2000 rpm; spindle bore: 2.0625-inches; threads diameteretrical qty speed: 32/4-32 DP; threads imperial qty speed: 40/2-56 TPI; threads metric qty speed: 53/0.4-14 millimeter pitch; threads module qty speed: 44/0.4-7 MP; spindle taper sleeve: Morse #4; spindle taper nose: Morse #6; tailstock quill diameter 2-1/8-inches; tailstock quill taper: Morse #4; tailstock quill travel: 4-3/4-inches; compound rest width: 4.33-inches; center length: 40-inches; center height: 7.086-inches; compound travel: 4-3/4-inches; bed height: 12.20-inches; bed length: 74-3/4-inches; bed width: 11.81-inches; longitudinal feeds metric qty speed: 40/0.032-0.640 millimeters/rev; main motor: 7.5 hp; longitudinal feeds imperial qty speed: 40/0.0012-inches-0.0252-inches/rev; lead screw diameter: 1-1/4-inches; lead screw thread pitch: 4 TPI; maximum swing in gap length: 6-1/8-inches; maximum swing over bed: 16-inches; maximum swing over cross slide: 9.45-inches; maximum swing in gap diameter 23.42-inches; cross feeds imperial qty speed: 40/0.0006-inches-0.0126-inches/rev; cross feeds metric qty speed: 40/0.015-0.320 millimeter/rev; cross slide travel: 9-inches; cross slide width: 7.08-inches; cutting tool max section: 5/8-inches by 5/8-inches; feed rod: 0.708 diameter; power: 220 volts/3-phase.