- Cast iron F204 flange block housing increases life of the bearing
- UFC201-8 chrome steel bearing for efficient operations at a wide range of speeds
- Dynamic (radial) load rating of 12.8 kN and static (axial) load rating of 6.65 kN
- Set screw prevents shaft slippage
- 1/2" inside diameter fits conventional cylindrical shafts
1/2" Bearing UCF201-8 + Square Flanged Cast Housing Mounted Bearings
|Price:||$12.95 & FREE Shipping|
Specifications for this item
|Bore Diameter||0.5 inches|
|Number of Items||1|
Frequently bought together
Customers who bought this item also bought
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
This UCF201-8 bearing has a cast iron flange housing, four bolt holes, and a 1/2" inside diameter. This ready-to-mount unit requires four 3/8" mounting bolts (sold separately). It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. The unit is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment with moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.
Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
Would you like to tell us about a lower price?
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
To my surprise, 3 of the 4 bearings were badly out of true. Fortunately, I only had to true up one of them (I only needed 2 of them - stacked inline) and it takes patience to do it (I bolted the bearing to the steel plate - 5 holes already drilled and then fixed the 1/2" stock to it and then leaned on the stock until the stock looked good against a right angle standard).
This truing up is quite a pain and something you should not have to deal with - so be prepared to have to do this.
All this said and done, the gambling wheel is mounted on a dining room wall (it all fit nicely between 2 stud walls) - spins like crazy and runs absoltely true with the 2 bearings.
Overall, I satisfied and they were cheap (hate buying stuff from China, but I can't seem to get away from it).