This is a BeyondNice brand replacement hot tub cover (made in USA) and features: • A brand new, factory direct and manufactured just for you, spa cover • Made any size up to 96 inches wide by 96 inches long, or 96 inches in diameter • Standard foam cores that taper from 4 inches thick at the middle to 2 inches thick at the edges • Standard 1.0 pound density, top quality virgin EPS foam cores (1.5 and 2.0 available) • A 5 year standard warranty including coverage for waterlogging • Manufactured in compliance with ASTM F1346 - 91(2012) Standards • Non-corrosive Galvalum metal C-channels, 30 percent stronger than aluminum • Polyethelene vapor barriers to keep moisture out • 26 oz. Marine Grade (best for UV), mildew resistant vinyl • 2 Nylon lifting handles, one on each side of the fold/hinge • Marine Grade Polyester thread • Steam stopper heat seals at each end of the hinge (full steam stopper available) • 4 locking tie down straps • Up to 6 inch wide skirt for weather and UV protection • Typical time to manufacture is 10 - 15 business days • Manufacturer of spa covers for 30 years
ORDERING Purchase this cover and complete your checkout. BeyondNice will be in contact for your cover specifications such as shape, dimensions & color. • Every component can be specified to create the exact cover for your needs and budget. • Your cover will be manufactured in about 3 weeks and shipped. Production cannot begin without your specifications, so do not delay in completing this process.