Bobbin Winder Yarn Winder Table Clasp, Marrywindix Hand Operated Manual Wool Winder Holder for Swift Yarn Fiber String Ball
Fulfillment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon's fulfillment centers, and we directly pack, ship, and provide customer service for these products. Something we hope you'll especially enjoy: FBA items qualify for FREE Shipping and .
If you're a seller, Fulfillment by Amazon can help you increase your sales. We invite you to learn more about Fulfillment by Amazon .
- Package Size: approx 8.6"*3.3"*8.6" (L*W*H)
- Transform loose yarn into immaculate, well-kept balls. These nifty, little gadgets require little to no assembly and they easily attach to any table or countertop without leaving damage.
- Heavy duty construction paired with elegant design and functionality.
- Light weight, Low noise, convenient and portable. The ball winder can be clamp to table or other support using integral clamp, clamp will work on thickness up to 1.5''.
- Get your knitting and crocheting supplies organized easily. Turn skeins of yarn into clean, neat center pull cakes or balls with ease.
Frequently bought together
Customers who bought this item also bought
Marrywindix Hand Operated Manual Wool Winder Holder for Swift Yarn Fiber String Ball
The wool winder is small and light
Perfect for family-use and portable
There is a detailed usage instruction paper
It is convenient to set up , can be put in most of table sides
Features & details:
Color: As the picture show
1 x wool winder
HOW TO USE WOOL WINDER
A device for winding yarn into a coerless ball, typically from a skein form.
1, Set spindle into geared base by aligning notches. While holding geared base, turn spindle clockwise to secure.
2.Clamp the ball winder to table or other support using integral clamp, clamp will work on thickness up to 1.5''. Clamp is controlled by turning red knob.
3.Rotate yarn guide so loop end faces upward. Pull it out as far as it will go, locking it into working position as shown.
4.Yarn to be wound should be supported on a swift to allow uniform transfer. Feed end of yarn through yarn guide and secure in notch on top of spindle. Yarn is easily placed through guide by simple wrapping it, in a clockwise direction, around the end coil.
5,Turn handle clockwise, forming the yarn into a ball. Finished ball can be withdrawn from winder by simply pulling off from underside of ball. Yarn from ball can be used by withdrawing from center core or from outer edge.
1.Please allow 1-3mm error due to manual measurement.
Please make sure you do not mind before you bid.
2.The colors may have different as the difference display,please understand.
Customers who viewed this item also viewed
Top Customer Reviews
Other hints for the yarn winder...
You really do have to hold the yarn tension with your other hand while you wind the yarn by turning the crank... otherwise the yarn is too loose.
You can make a much larger cake of yarn than specified IF you hold the yarn downward with good tension before it goes through the yarn guide and on the winder. Just be careful when removing large yarn cakes and slide your hand underneath to free up any yarn that may get caught under the spindle. It's not a big deal.
You can use a paper towel roll and some paper towels placed inside the roll to wedge it onto the spindle and use the paper towel roll as a "core" to wind onto... for those who like to use a yarn dispenser when they knit and crochet. I find the toilet paper roll is too short for my huge cakes I make with this winder.
One person I read has bent their yarn guide SLIGHTLY backward so they can manage getting a whole skein of Red Heart Super Saver yarn (7 oz) on one cake and it works for them. They didn't say how they managed to bend it but said their husband is handy and did it for them.
Another person I read has used electrical tape wound around the bottom bit of the yarn guide to it cannot fall down. I thought that was clever too.
I've now made about 50 large yarn cakes with my whole stash in a couple of days with absolutely no troubles at all. I found that a Super Saver Jumbo (1 lb) skein will make 3 large yarn cakes that I toss in plastic zip lock bags and stack in my plastic yarn bins. What a space saver and no more crazy tangles of yarn tails making a mess of my stash. Best money I ever saved... not listening to the bad reviews on this yarn winder.
It works very fast, too. Just make sure you keep the yarn even with the metal feeder or even higher because if it goes too low, it will jam the mechanism. Then you have to cut it out. Not fun.
When done, the top and bottom are flat so it is easy to stack.
It is also good for freaking out a nosy cat. One crank of the handle and you pretty much have the thing to yourself.
The photo was about two hours of straight winding.
The one problem I experienced (and hence loss of 1-star from review) is related to the guide hook and bar. The bar only "locks" in place when pulled outward away from the winder. But there is no resistance, detent, or spring to hold it in the outward position -- so with the yarn pulling inward and a little vibration, it quickly moves and falls over.
I solved the guide problem by adding a small spring, the type you find I ballpoint pens. I simply slipped the spring over the end of the bar and slid it all the way to the base -- then put a small drop of epoxy at the 90-degree bend in the guide, securing the spring. (See photos). Now the bar stays in place while winding, but can still be pushed inward and swung down for storage. I highly recommend the manufacture consider adding a spring to the design. Sample product provided for review.
If this came with a spring or other way to hold the guide in place, it would get 5 stars. But other than that, it functions well and seems made well, especially at this price point.
Maybe it works as well as it's supposed to (I've never used wool winders before so don't know). The yarn guide and the clamp designs leave a lot to be desired. I wound slowly with a bit of tension but still the yarn would slip off the bottom and get caught in the gears.
I'm sure there's a learning curve and this is the lowest price 'entry' level winder out there so I accept that it is what it is. But I'll be looking for something better in the future.