- Receive 1 12colors 20 Feet PLA Filament free when you purchase 1 or more Tipeye 06A 3D pen offered by iCoolSmart. Here's how (restrictions apply)
- Save 30% on 3D Pen PLA filament when you purchase 1 or more 3D pen offered by iCoolSmart. Enter code BJSZ9GMA at checkout. Here's how (restrictions apply)
Add Both 3D Pen and 12 Colors 20 Feet PLA Filament to Cart - 2018 Tipeye Newest SmartGear 06A 3D Doodler pen Kits 3D Printing Pen with LCD Display for Kids, Doodling, Artist, DIY, Drawing etc
Fulfillment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon's fulfillment centers, and we directly pack, ship, and provide customer service for these products. Something we hope you'll especially enjoy: FBA items qualify for FREE Shipping and Amazon Prime.
If you're a seller, Fulfillment by Amazon can help you increase your sales. We invite you to learn more about Fulfillment by Amazon .
- Enter your model number to make sure this fits.
- 🎄【Normal Temperature 3D pen】 Add both TIPEYE 06A and 3D Pen PLA filament [ASIN:B01MYA09QM ]. NO code needed, and you will get 12colors 20 feet in total 240 PLA filament!!!! The filament should be add to cart at same time to check out please.
- 🎄【Adjustable Temperature and Speed】The 6th Tipeye 3d pen is compatible with both ABS & PLA Filament. PLA Filament is non-toxic and odorless,safer than ABS, and tend to be widely-used filaments, included 1*24.6ft(7.5m) length PLA filament.Please do not use with PCL filament.The Aircraft-grade aluminum 3D printing pen enables you control the temperature and speed when you enjoy drawing.
- 🎄【Advanced LCD Display】 The 3d doodler pen LCD screen shows temperature, speed, filament, which enables you control the temperature and speed when you enjoy drawing 3D model.Receive one 3d paper model free. Add paper model [asin: B072NYTGBZ] to cart together. This 3d art pen is best gift for Christmas, kids, doodling art craft making and artists
- 🎄【Package Content】 1*3D printing pen 2. 1*Power adapter（5V/2A） 3.1*USB cable 4.1*Manual 5. 1*24.6ft(7.5m) length PLA filament 6.1*pen holder. The heater nozzle of the 3d printing pen can be replaced. Asin:B0722K6Y6B
- 🎄【Warranty from the purchase date】 30 days return [replace] a purchase,1 year Warranty and whole-life customer service, please contact us through firstname.lastname@example.org if you have any problem with this 3D pen. We will offer you solution within 24 hours.
Frequently bought together
Customers who viewed this item also viewed
Customers who bought this item also bought
Special offers and product promotions
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
- Save 30% on 3D Pen 12 different colors and 20feet PLA filament when you purchase B01MYA09QM with the pen BOTH TO CART.
- 12 colors, 20 feet B01MYA09QM： Brown, Red, Pink, Orange, Yellow, Dark Blue, Sky Blue, Purple, Green, Light Green, White, Black
Material: Durable aircraft-grade aluminum
Size: 6.7*1.1 inch (17.2*2.8cm)
Voltage: DC 5V 2A
Nozzle Diameter: 0.6mm
Printing Temperature: 180-220℃ adjustable
Printing Speed: Low, Mideum, High speed
Printing Model: PLA 1.75mm
Cable length: 1.5m
Package Size: 18.8*15.5*6cm
Package Weight: about 385g
Package included: 1* 3D pen, 1*USB cable, 1* power adapter, 1* 24.6ft（7.5M） random color PLA filament, 1* pen holder
1.Connect the 3d pen to power supply(5V/2A),It enters into standby condition when the LCD screen displays "PLA" or "ABS" .
2. Mode Options：Please press the “L” button and press the “◀” ( load filament button ) button once to confirm and the pen rises the temperature automatically.(If you need to switch the filament mode after a period time of using,then please stop loading the filament and unload the filament and cut the power supply and connect once again to switch the filament mode ).
3.In PLA or ABS mode, press the “L” button each time to switch the mode of the speed that load the filament.
4.Press the “◀” button once to stop loading, press the “▶” button once to start unloading automatically.
5.This product will automatically enter into standby mode without using of 3 minutes and the LCD screen displays "SLEEP" . Please press the "«" button once to activate.
1.Product applicable age: 5 years old and above.
2. Please make sure the cut end of the product is even each time when you use it.When the filament is running out please also make sure the other end of the filament is even otherwise it will get stock.
3.This product is a precision electronic product,the continuous working time is 3 hours, please do not use it more than 3 hours, so as to avoid damage to the pen and motor.
4.Pay attention to the temperature of the nozzle, please do not touch the nozzle during use.The temperature of the normal temperature 3d pen nib can reach 50℃.
5. Please do not use the nib to touch other hard objects.
6.Please do not use foreign materials to load the hole of load the filament or the nib.
7. Please do not use other manufacturers’ consumables, so as not to cause incompatibility.
8.This product is not waterproof.
9. Make sure that the filament is completely out of the pen and cut off the power supply after using.
10. Please put the pen in a place where children can not touch after using.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
There are a couple things I do have gripes with though; I ordered this expecting to have 5 different glow-in-the-dark filaments and the packaging itself says so. Upon inspection, I only appear to have TWO different glow-in-the-dark filaments. Kind of a bummer. The second issue that I have is this sampler pack is frustrating because none of the filament samples are labeled. There are some that are very similar in color but distinct enough where if I want to actually order a full roll of any of this material, it can be problematic to identify. It would be nice to have some kind of basic labeling on the filament samples. If my pack had all 5 glow-in-the-dark colors this would have been a 4 star, and the labels so I can easily order full rolls would have bumped it to a 5.
In spite of my issues, this is still a great deal and I would recommend picking it up if you want a boat-load of colors to print a boat-load of Benchies!
There are some Cons, though. Firstly, the pen will unload filament, and after the unload process, you cannot deactivate the motor with a button push, you have to disconnect power; this can be a problem if you are planning to change colors for your work. Secondly, the supplied manual is in French and German, but not English. They do, however, remedy this by sending you the English manual in an email after you make your purchase, and I know you can get this on the manufacturer's site as well.
All in all, it's a great pen for the price. It works very smoothly and is very easy to work with.
EASE OF USE
The pen was easy to use. For a younger child, you have to teach him the basic flow and make sure they understand the mechanics. Once you get going, it is real simple, but there is a learning curve for little kids.
HOW IT WORKS
You turn the pen on by plugging it in. Then you let the pen heat up. The pen then has a small feeder that you stick the plastic string in, one color at a time. The string is like thick weed wacker plastic. You then feed the plastic forward through the pen and it melts the plastic. As it melts, you simply start stacking and drawing with it. As the plastic cools, it becomes firm, which is within seconds. Really cool tool! It is amazing how strong it is. As my son puts it, like really hard crusty boogers.
WHAT YOU CAN CREATE
You can do everything from handwriting to creatures to structures. The key with building taller items is to mechanically put the structure together properly, then you can go real big. The plastic is light plastic, so this is not for use outside of making fun things. Crafts, toys, creatures, etc. they can all be built!
No, you have to keep feeding the pen new plastic. So this means the more you build, the more you spend, but it’s a lot of fun!
Very safe. Although pen gets hot, it is just the tip. Not exposed like the old school glue guns, the tip is smaller. It was safe enough for my 6 year old and when he did hit the tip or fresh plastic, it was hot, but nothing serious.
WHY MY WIFE WOULD NOT SHARE
My wife had a lot of fun with leaving me and the kids messages. Once she got going with it, she became the bully in school who never shares. It was fun to see everyone get creative.
Creativity is so fun. When you have new unique ways to make creative items come to life, it's exciting and it keeps the kids engaged. I really like this pen and recommend it to anyone who likes to tinker and build.
Good luck with the pen. I attached some images and videos.