|Item Weight||46 pounds|
|Product Dimensions||19.7 x 29.5 x 48 inches|
|Item model number||SV218B2-30|
|Color||Brushed Stainless Steel|
|Finish||Brushed Stainless Steel|
|Installation Method||Wall Mounted|
|Item Package Quantity||1|
|Air Flow Capacity||900 CFM|
|Special Features||Dimensions: 19.69"L x 29.53"W x 48"H, Chimney Extension for 10' Ceilings is Part # SV218-ACS-CCEL-B2/F/L2-WM, Chimney Extension for 11' and 12' Ceilings is Part # SV218-ACS-EXCCE-B2/F/L2-WM, Venting Mode: Ducted (Optional Re-Circulating Kit Available for Ductless Use - Part # SV218-ACS-RECIR-B2/F/L2-WM), Noise Level: Low Speed: 25 db (0.4 sones) to Max Speed: 56db (7.0 sones)|
|Warranty Description||One-year limited factory warranty. Please visit our Terms and Conditions for details: http://www.euro-kitchen.com/terms.asp|
CAVALIERE 30" Wall Mounted Stainless Steel Kitchen Range Hood 900 CFM SV218B2-30
|Sale:||$349.00 & FREE Shipping|
|You Save:||$100.00 (22%)|
- Preparing 1 new customer-supplied range hood for installation
- Disconnecting old range hood
- Mounting range hood and connecting electrical cables See more and upgrades
- Connecting ducting to existing outdoor wall cap
- Testing fan and lights
Want professional installation of this product?
- Handpicked pros
- Compare estimates and reviews
- Buy directly on Amazon
- Backed by Amazon's Happiness Guarantee
- Enter your model number to make sure this fits.
- Wall Mount Kitchen Range Hood 29.5"W x 19.69"D x 48"H
- Two Dimmable 35w Halogen Lights
- 900-CFM Blower For Heavy Duty Cooking - 6" Round Exhaust Duct Vent
- Six-Speed Electronic Touch Sensitive Control Panel with LCD Display
- Telescopic Chimney Fits up to a 9' Ceiling (Chimney Extensions Available for Higher Ceilings)
Frequently Bought Together
Customers Who Bought This Item Also Bought
- Dimensions: 19.69"L x 29.53"W x 48"H
- Chimney Extension for 10' Ceilings is Part # SV218-ACS-CCEL-B2/F/L2-WM
- Chimney Extension for 11' and 12' Ceilings is Part # SV218-ACS-EXCCE-B2/F/L2-WM
- Venting Mode: Ducted (Optional Re-Circulating Kit Available for Ductless Use - Part # SV218-ACS-RECIR-B2/F/L2-WM)
- Noise Level: Low Speed: 25 db (0.4 sones) to Max Speed: 56db (7.0 sones)
1 Year Manufacturer Parts Warranty
Top Customer Reviews
After a year of use, my parents are very pleased with the product. The stainless steel finish cleans off very easily with a little vinegar, and the filters are easily removed and cleaned.
The second issue was again with the keypad/LCD control module. The buttons are awkward to push and because of that the mount that holds the module in place broke (it is plastic). So, I had to file a warranty claim with the manufacturer to get a replacement module which I had to install myself (easy, but I did have to pay shipping). To prevent the issue from happening again, I placed some washers behind the module for reinforcement. This helps prevent it from sliding backward when the buttons are pressed (I highly suggest this from the get go).
Overall, this range hood was great for the money. Install was straight forward and it looks great. It is quiet on its lowest setting and you can feel the suction within the room when it is on full suction. I would not hesitate to buy/suggest this to anyone.
This is a heavy duty hood- the fan suction is great! On level 6 it is very strong! My only copmplaint is there is no dimmer for the halogen lights. I'm fine with the lights at the back of the hood as they are bright and shed plenty of light on the range top. We installed our hood about 28" above the range so the lighting is perfect. I would prefer the ability to dim the lights though for subtle lighting in the evenings.
The directions were a bit tough to follow- but you need to follow them in the order they state! VERY IMPORTANT- we were doing a complete remodel so I looked at the directions online before we received the unit to see where on the wall we needed extra support. Our walls were open (no drywall yet) so we could install an extra 2x4 for support. The directions show the mounting bracket is at the very top of the unit- FALSE that bracket essentially only supports the upper area of the venting (maybe 5-8lbs) The main support is right behind where the vent stack meets the hood. I wasn't a happy camper when we figured this out (our walls were all closed up and painted) so we ended up using the drywall anchors that came with the unit. I'm a little nervous about the bulk of the weight only being supported by drywall and drywall anchors- time will tell.
Other than that- the hood is awesome, packed extremely well too!
The first unit Wayfair sent had damage on the right front corner - it looked like a manufacturing defect but I was going to live with it. Then the unit also vibrated badly above speed two. I registered a complaint and they said to ship the old one back. I inquired if it was okay to ship since the cord was cut (my application required it to be hard wired) and it had additional holes screwed in it for mounting to the studs. I received no reply but then received a tracking notice for a new unit being sent. I received a brand new unit for no charge and they did not want the old one back! The new fan was flawless and works great.
I had a local sheet metal company make new seamless chimney for the hood. I have 9'+ ceiling and did not want to see the seam on the two piece adjustable chimney it comes with. It cost $120. Even with that cost, the total is much less than many of the higher end units (and many of them have worse reviews). In my old house I only used one piece of the supplied chimney and held the hood higher above the stove than recommended. It still functioned fine.
Excellent hood for the cost! Good service by the Amazon seller!
Most Recent Customer Reviews
Honestly disappointed, I would send it back if I hadn't installed it already, might add a video afterwards but basically it makes a horrible rattling noise in level 5-6, I Will... Read morePublished 15 days ago by Ana Marquez
We have had our exhaust hood for about 2 years now. Main control panel just died tonight. The front of the panel felt unusually hot, then when I turned on the fan, there was a... Read morePublished 17 days ago by John D.
Definitely not powerful for 900cfm, looks good, but could work better I guessPublished 1 month ago by M. Glabets
My husband bought this for our kitchen and I love it! It looks very nice and makes my kitchen look sharp. Read morePublished 1 month ago by tammy austin
Makes a rattling noise at times, like internal parts are vibrating...Published 2 months ago by Amazon Customer
Looks nice but one light went out after 2 weeks. I have no idea how to put the replacement back in so we just don't use the lightsPublished 3 months ago by Pokemom
Quiet but not as strong as we would like. For something that is 900 cfm, I thought it would suction better.Published 4 months ago by Amazon Customer