Overall this is a pretty good backup system. Installation is not "plug & play". It requires some knowledge of automotive wiring (tapping into a circuit that becomes hot with the ignition's ON position and basic crimping) but nothing advanced.
The camera is easy enough to mount. Most installations will require either drilling tap holes or using small self-tapping screws.
One point to be aware of is that the camera has two plugs that will need to be passed through the exterior wall to prevent later water issues. This requires drilling a 7/16" hole near the camera mount point. Note that you should leave a "drip loop" between the entry point and the camera to direct water away from the entry hole. The entry hole will need be sealed with silicone caulk since the hole needs to be significantly larger than the wires to allow the plugs to pass through.
The monitor was easy to mount and is flexible for different configurations. I mounted mine from the ceiling since the rear view mirror is pointless in my vehicle. This gives it a natural positioning for rear view and prevents me from having to drill holes in the dash to mount it.
The video is sufficient. It seems to be a little color-blind...green mostly registers as gray although red and blue come through fairly well. I am not sure if this is because of the camera or the monitor. That said, it is comparable with many factory installed rear view cameras I have seen. It is definitely not HD quality, but it does the job (see photos).
| Manufacturer | Camecho |
|---|---|
| Brand | CAMECHO |
| Model | CM00-K008396 |
| Item Weight | 1.65 pounds |
| Product Dimensions | 11.26 x 6.5 x 5.35 inches |
| Item model number | CM00-K008396 |
| Is Discontinued By Manufacturer | No |
| Exterior | Chrome |
| Manufacturer Part Number | AMK0083CA |
| Lift Type | 12V 24V |
| Voltage | 24 Volts |
