Camouflage Stencil You can use this large-format Camo stencil for creating patterns on trucks boats wood surfaces duck blinds deer blinds walls floors and fabrics. The paint can be applied through the stencil with camo spray paint (available at most hardware stores) or liquid paints using our high density foam rollers. Boats should be painted with specialty marine camo paints (such as Pettit Z*Spar) while walls can be painted with interior paints. The camo stencil design repeats in all directions allowing you to customize any size project. Quickly and easily create a camouflaged surface with our camo stencils! The basic kit contains: 1 - 19.5" x 19.5" Stencil Sheet You can also order the stencil in a 40" x 40" size - shown as Production Stencil 4 full repeats or 40" x 80" size - shows as Production Stencil 8 full repeats. Note: The image shown was painted twice with this stencil. The background was khaki to start. Then the first paint applied was leaf green. The stencil was then rotated clockwise one turn and painted with the driftwood color. This detail and color sequence can be varied in any combination and performed with any paint. If you would like to test this pattern with some basic paints you can try ordering the the paint kit or the complete kit. The paint kit comes with 2 oz. Acrylic stencil paint colors: MDA02173 Khaki Tan (Base coat) MDA02051 Leaf Green (stencil Layer 1) MDA02171 Driftwood(stencil layer 2) If you are camo stenciling on an outdoor surface you should not use acrylic paint. Complete kit comes with stencil two each of the paints and one T7604 4 inch Foam Roller We now have Production stencils with more repeats on 1 stencil (4 repeats shown left) order SPS2007-4 or SPS2007-8 (for 8 repeats) below The 4 and 8 repeat stencils are non-returnable and all sales are final.