|Item Weight||9.6 ounces|
|Product Dimensions||4.7 x 2.3 x 1.9 inches|
|Item model number||CT5-1-1/16|
|Item Package Quantity||1|
Champion CT5-1-1/16 Tungsten Carbide Tipped 1-1/16-Inch Hole Cutter-3/16-Inch Thin Metal
|Price:||$40.93 & FREE Shipping on orders over $49. Details|
- Enter your model number to make sure this fits.
- Special Tungsten Carbide Teeth with One Piece Construction
- Removeable Ejector Spring, Replaceable Pilot Pin and comes with Safety Collar Stop
- Maximum cutting depth of 3/16"
- Cuts steel plate, iron, aluminum, copper, cast iron, stainless steel, FRP(fiberglass) and plastics (PVC & Conduit)
- Applications include: Junction/Switch Boxes, Metal Studs, Electrical Appliances, Lighting Fixtures, Auto and Truck Body Repair
Customers Who Viewed This Item Also Viewed
From the Manufacturer
Top Customer Reviews
Cuts stainless steel sheet relatively well though important always with stainless to use an extremely low RPM, otherwise the stainless steel will temper and become harder as you try to cut it. By extremely low I mean 200 RPM at most and 100 RPM is better.
This particular hole cutter is meant for cutting sheet steel that is 3/16 inch or about 5mm thick. The pilot bit is removable but the diameter is not a common one nor is the length for pilot bits readily available in the USA so a good idea to exercise caution and not take a chance of breaking it.
Most TCT hole cutters like this come in a plastic storage case that includes a hex wrench for the set screw used to secure the pilot bit. Not so with the Champion hole cutters which come in a blister pack so you need to find a box to store the hole cutter and hex wrench when it is not in use.
These are medium grade cutters and are good as a step up from bi-metal hole saws. When working in food plants or hospitals I use the Metal Pro instead as they will mount on the Hole Pro arbor adapter that works with their dust shields.
Blue Boar TCT Metal Pro 1-3/8" (35mm) tungsten carbide hole cutter. Up to 5/16" thick stainless steel, sheet metal, cast iron, aluminum, copper, brass, steel plate, fiberglass, FRP. More holes per dollar than high speed steel or bi-metal hole saws
We started to use the new Metal Pro tungsten carbide hole cutters from Blue Boar. They cut the same and cost a lot less. Best part is that they use a 1/4 inch pilot bit so spares are easy to find if we break one on the job.
Blue Boar TCT Metal Pro 1-1/4" (32mm) tungsten carbide hole cutter. Up to 5/16" thick stainless steel, sheet metal, cast iron, aluminum, copper, brass, steel plate, fiberglass, FRP. More holes per dollar than high speed steel or bi-metal hole saws
Jim - AutoGatePros
Most Recent Customer Reviews
The best hole saw for galvanized sheet metal I have ever used. I drilled 180 - 2 3/4" holes in 26 gauge galvanized sheet metal without using oil to cool the saw and it still... Read morePublished 5 months ago by R. W. Draper
Expensive but these do not burn or heat up and do not appear to get dullPublished 7 months ago by Stuart M. Hagen