Cheetah Mounts APDAM2B Dual Articulating Arm (20” Extension) TV Wall Mount Bracket for 32-65” TVs (many up to 75” or more) up to VESA 600 and 165lbs, including a Twisted Veins 10’ HDMI Cable and a 6” 3-Axis Magnetic Bubble Level
We don't know when or if this item will be back in stock.
- Fits 32-65" TVs (Many up to 75” or More) with Hole Patterns up to VESA 600x400mm (24x16”) and up to 165lbs
- 20" Extension yet only 2.9" (8m) when Collapsed, 130° Swivel and 10° Tilt
- Allows for 3° Rotation Adjustment to Level after Installation
- FULLY ASSEMBLED and Mounts to 16” or 24” Wooden Studs as well as All Masonry
- Includes a 10' Twisted Veins HDMI Cable, and a 6" 3 Axis Magnetic Bubble Level
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
FITS 32-65" TVs up to VESA 600 and 165LBS
This mount fits virtually all 32-65" TVs sold today. It will fit many larger TVs up to 75” or More as long as the hole pattern is less than VESA 600x400 (24x16”) and it weighs less than 165lbs.
20" EXTENSION, LOW 2.9" PROFILE, 130° SWIVEL, 10° TILT
The articulating arm extends up to 20" from the wall yet collapses to 2.8". The mount allows for up to 130° swivel and 10° tilt.
ALLOWS 3° ROTATION ADJUSTMENT TO LEVEL AFTER INSTALLATION
Slots in the TV plate allow for 3° of rotation adjustment to level the display after mounting.
MOUNTS TO 16” or 24” WOODEN STUDS AS WELL AS S ALL MASONRY
The APDAM2B can be mounted to all types of masonry as well as Two standard 16” or 24” Wooden wall studs. All mounting hardware is included.
10' TWISTED VEINS HDMI CABLE AND 6” MAGNETIC BUBBLE LEVEL
The mount includes a 10’ Twisted Veins High Speed with Ethernet HDMI cable featuring 4K 60HZ 3D signal support and a protective braided jacket. A 6" 3-axis Magnetic Bubble Level ensures level mounting.
INCLUDES ALL NECESSARY MOUNTING HARDWARE
This mount ships with hardware for both wall and TV mounting.
LIFETIME 100% GUARANTEE
All our mounts come with a lifetime guarantee. If you experience ANY issues, please contact us.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
The TV looks like it will fall off, I am seeing lots of one star reviews now so something is wrong with the latest version of this mount.
I replaced this wall mount with this: http://www.amazon.com/gp/product/B001LL5JDA/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 The new VideoSecu mount is superior in every way to the Cheetah. The attachment clips to the TV are twice as wide and heavier gauge than the Cheetah. For $25 more this mount blows away the Cheetah unit.
Carol with SPN has sent a replacement for this unit I am awaiting delivery and will update when I get the new unit.
While it did take some time for them to respond, they seem to really eager to rectify the situation.
SPN did finally send the older version of this mount and now I know why everyone was raving about this mount. It is superior in every way, pre-assembled, heavier gauge metal for the TV clips, and a solid plate to hang the TV off of.
I don't know why they would sell two mounts that are vastly different under the same model number.
I have posted two photos showing the difference between the two units being sold under the same model number. SPN is anxious for me to improve my star rating for this mount, but I let them know that as long as they are selling the inferior unit under the same model number I am reluctant to change the star rating.
When I remove the TV, the bracket returns to level. The problem is that the sheet metal lip onto which the TV hooks hang bends forward once the TV is hung, and there is no means provided for leveling.
Also, the four bolts that adjust side-to-side level after the mount is attached to the wall utilize plastic washers (must be decorative; whoever heard of plastic washers for weight-bearing connections?) that deform terribly once you tighten the adjusting bolts.
The bracket also has no means to prevent the TV from sliding sideways off the mount; the rail onto which the hooks hang have no stoppers, screws, or any means of securing sideways motion on the bracket. Who would want to entrust their expensive equipment to such a design?
I'm terribly disappointed in the unit, and I'm dismayed that I'll have to pay shipping and "restocking" fees for a mount that is not capable of its advertised functions.
What a pain after hours of trying to assemble this thing! Now we have to take it all apart to ship back. Oh- and Cheetah customer services reps are the rudest people I have dealt with in a long time. Cranky, rude, and interrupting people. They offer nothing for this inconvenience other than shipping us the old mount for the same price. They did say would would wave the shipping cost....big dang deal!