Other Sellers on Amazon
+ Free Shipping
2003 Chevrolet Silverado 1500 2500 3500 Keyless Entry Remote Key Fob w/ Free DIY Programming Instructions - Blue
|Price:||$16.40 & FREE Shipping|
- Enter your model number to make sure this fits.
- Fully tested complete remote with a battery. Free Tech support via Phone, Email and Chat
- Self-programming instructions are included with your purchase. Compatible with Memory #1 & Memory #2.
- Check product description below to confirm this remote is compatible with your vehicle
- Replacement for the following part numbers: LHJ011, 15186200, 15186201, 15132197, 15132198, 10377295, 22730827, 15186203, 21997127
- This remote will work just like the orginal OEM provided with the vehicle
Customers who viewed this item also viewed
What other items do customers buy after viewing this item?
Compare to similar items
This item 2003 Chevrolet Silverado 1500 2500 3500 Keyless Entry Remote Key Fob w/ Free DIY Programming Instructions - Blue
|Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Item Dimensions||—||4 x 4 x 4 in||0.75 x 2 x 4 in||0.75 x 2 x 4 in|
2003 - 2007 GM 3 Button Keyless Entry Remote - LHJ011
OE Part#: 21997127,15186200,15186201,15186203,15132197,15132198,10377295
Compatible with the following vehicles:
2003 - 2007 Cadillac Escalade
2003 - 2007 Chevrolet Avalanche
2003 - 2007 Chevrolet Silverado
2003 - 2007 Chevrolet Suburban
2003 - 2007 Chevrolet Tahoe
2003 - 2007 GMC Sierra
2003 - 2007 GMC Yukon
2003 - 2007 Hummer H2
2005 - 2006 Chevrolet Equinox - (Not self-programmable (Local locksmith required for programming)
2005 - 2006 Pontiac Torrent - (Not self-programmable (Local locksmith required for programming)
2004 - 2007 Saturn Vue - (Not self-programmable (Local locksmith required for programming)
We provide 100% free tech support via phone, email and chat 7 days per week.
Please message us with any questions you may have.
Customers also shopped for
Top customer reviews
I received no direction as to "how to" clear the codes nor how to reset the battery in order for me to get the remote to work. Therefore, I had to then go online to research how to clear codes, etc. without any help from the company who specializes in this remote. Furthermore, the company was passing me off to just go to a dealer or locksmith if I couldn't figure out how to program their remote! Unbelievable. Before doing my research, here was my response back to Remotesremotes.com:
"The purpose of me buying this remote from you was so that I could program it myself rather than spend a load of money taking it to a professional. Otherwise, I may as well bought the $80 remote from the dealer rather than waste the twenty bucks I spent on this one from your company.
This seems to be a common problem with your remote. Since this is the case, directions on HOW TO clear the codes or reset the battery would be more helpful than directing me to a dealer or professional locksmith.
I'll see what I can do on my own. If I cannot, how can this item be returned to you without more cost to me?"
Well, I didn't get my answer to my last question either. They gave me an address to return the item but no guarantee when I would get my money back nor were they going to pay for my shipping to send it back to them. In a nutshell, I would NOT recommend this product or any product from this company.
1. enter car, shut door, apply parking brake.
2. while holding down the door unlock switch turn the key from the OFF position to the ON position and back twice quickly (from off to on to off to on to off) and then release door unlock button.
3. hold down lock and unlock buttons on remote until locks cycle (took 15 seconds) repeat this step for every remote you have.
4. turn key forward to ON position, horn sounds and locks cycle. DONE.
I also tried to use a SnapOn Modis scan tool to program the passenger door module (this controls the keyless entry) and could not. I could read the module but could not enter the programmking area. I did this before I learned that the parking brake may need to be set first, and didn't try it with the brake set. It may very well work once the brake is set also.
Note: When you program the remote, realize that it will erase any remotes that were previously stored in the vehicle's memory. So if you have one or more existing remotes, by programming this new remote, you will erase your existing remotes. In order for all your remotes to work, you need to program all your remotes during the same programming sequence. That is not difficult, you just need to know to do this otherwise the only remote that will work is the one you just programmed.
Once things are paired the remote works great.
It did take several attempts AND READING instructions to perfect
start with new remote programming AND Any other remotes you have at the time of programming with you.
Follow steps 1 to 4
now read the paragraph.
First remote hold LOCK & UNLOCK until the lock cycles
THEN.......Do the same for the next... JUST press the LOCK & UNLOCK on the next remote until lock cycles and go to the next remote
THEN after the last one turn key to ON position then OFF
Then test all buttons on All Remotes.
Don't mind the Bright Blue either.
We will order another for a spare for $23.99