Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
Cold Steel 17T Kobun Tanto Fixed
- Enter your model number to make sure this fits.
- JAPANESE AUS 8A STAINLESS
- Made in: taiwan
- Category name: new products
- Made in USA or imported
- Tanto-style boot knife named after Japanese word for "soldier"; sleek, lightweight knife has reinforced point that's highly resistant to bending and breakage
- Checkered, nonslip Kraton handle has minimum bulk with great deal of grip; cross section designed to be as thin as possible at only a half inch
Frequently bought together
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
9.88" overall. 5.5" AUS-8A stainless tanto blade. Black Kray-Ex handle. Lanyard hole. Black Secure-Ex belt sheath. Hang packaged.
The Kobun, from creative cutlery company Cold Steel, is a Tanto-style boot knife named after the Japanese word for "soldier." The sleek, lightweight knife has a blade made of Japanese AUS 8A stainless steel, with a reinforced point that's highly resistant to bending and breakage. The blade's spine runs nearly to the tip of the blade for added durability, and a checkered, nonslip Kraton handle has minimum bulk with a great deal of grip. Its cross section is designed to be as thin as possible at only a half inch, and contoured to resist turning or shifting in your palm. A Secure-Ex sheath is also included.
- 9.875-inch overall length
- 5.5-inch blade
- Japanese AUS 8A stainless steel
- 4.375-inch Kraton handle
- Secure-Ex sheath
- 4.4-ounce weight
All Cold Steel knifes are warranted against defects in materials and workmanship. Details are included with your purchase.
About Cold Steel
Cold Steel, Incorporated was founded in 1980, with the goal of making the strongest, sharpest cutlery in the world for knife enthusiasts. Over the last three-plus decades, the company has been at the forefront of many design innovations that have helped innovate the knife industry, including introduction of checked Kraton handles, and the tanto point blade styles which have become industry hallmarks of quality and sophistication.
Would you like to tell us about a lower price?
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
I'm not going to measure and weight this for you; people have already done it and you can find the results on the CS website. However, a couple of notes that are not necessarily criticisims but maybe things to think about depending on your planned use:
-The handle: great kraton stuff if you've never seen it before. performs flawlessly wet or dry and your hand will PROBABLY not slip down onto your now razor-sharp blade. God help you if it does. My issue is that it's a bit small in diameter, so if you've got big hands like me, you may have a problem...
I did a de-cored 550 cord flat wrap on my handle (wet), and will try to post a couple of pics here showing the results. If you have bigger hands, you are going to absolutely want to do this as it makes all the world of difference and the grip is exponentially better. (please do not confuse my wrap with the 'other' handle wrap on this page. That is what looks like a tradional 'ito' wrap and I don't know how to do it. It's beautiful, and I offer my sincerest congrats to whoever did it! However, please don't ask me to show you how!)
-Sheath: as usual, an awesome CS Secure-ex sheath and the blade does not shake, rattle or roll. AND, despite what other reviews may have mentioned it DOES have a drain hole. Will mention that it is very hard to see and personally am going to drill mine out as it doesn't seem very useful in its stock shape.
Mounting: I have seen good and bad reviews on this sheath and it's mounting capabilities. Bottom line, it has a REMOVEABLE clip so it can obviously be mounted anywhere. Personally, would try to mount it with that clip wherever you want but back it up with either 550 or zip ties. Not trusting that clip...
-Blade retention: uhhh.... For most normal uses I would have to say that it is fine; blade is retained in the sheath via tension on the handle guard. And don't get me wrong, it is good! However, if you happen to be using this knife in an upside down configuration and are running with it I think I'd consider looking at modifications to the sheath. Not sure what just yet but will post an update with I figure it out.
It came satisfactorily sharp, though i did touch up the edge upon receiving it, as I do with most blades I get. I usually always adjust the bevel to my preference. But it should be noted it did come with a decent edge. I received it well oiled, which was good, as to prevent rust while it was being stored and shipped out. AUS 8 is a "stainless" steel. But that doesn't mean it cant rust. Its stain resistance is moderate, but not super high. It can and will rust, though not as quickly as carbon steels. A light coating of oil or Tuf-Glide will help to ensure it does not rust. But a little bit of rust wont hurt it. It wont fall apart and disintegrate if it gets a bit of rust on it. No big deal. The primary point of the blade is very pointy, and will penetrate well. I was satisfied with that. The secondary point on the blade formed by the tanto design is not as aggressive, but still a force to be reckon with in a snap cutting fashion. It also allows pressure to be focused at the point for deep cutting.
The sheath is a decent injection molded plastic sheath from what I see. The clip can be removed, and it is primarily designed to be carried IWB (inside the waste band.) That is why the clip is positioned on the side its on. Some people have incorrectly assumed the clip is "on the wrong side". That is the reason for this. It is not designed to be clipped on to the belt to hang off outside of the belt. It is for IWB. I removed the clip, and made a loop through one of the top grommets with 550 cord which i use as the belt loop and carry it IWB, when I do carry it, which is not often as I have blades I prefer more. I mainly purchased this on a whim for its high reviews, and price point. It is a decent blade I can lend to some one, or just have around.
Over all I find the knife to be satisfactory for the price. It works, and is a decent knife for the price. There are better options out there if you are willing to spend more, but that's not the point. If you are willing to pay the price this knife is available at, you will not be disappointed, but will find it is nothing mind blowing ether. It is a purpose built knife designed to fill a relatively niche, and small roll. For that roll, it is satisfactory at the price point. Thank you.
Right now is May '17.
The knife had held up great. I keep it around the garage as a beater for opening boxes, breaking down cardboard, prying things I shouldn't pry with a knife you name it.
The blade is still fairly sharp and I've never sharpened it after half a year of almost daily abuse. If I didn't passionately hate sharpening Tanto blades, I'm sure I could work it over to be sharper than factory.
The sheath is actually pretty nice and holds the knife well. I simply don't like the clip design and would have preferred a snap.
As mentioned, I bought on a lightening deal for under $22 which for that price I think it's very well worth it. However looking at the link right now, I see it's going for $38.33. I wouldn't pay that much for it.
Most recent customer reviews
This is my second one.Read more