Contour 4160 Right Profile Mount for Contour Cameras
- Enter your model number to make sure this fits.
- Low-profile design enhances the compact character of Contour cameras
- 3M base adheres to flat and slightly curved surfaces
- T Rail system fits on all Contour cameras
Customers Who Bought This Item Also Bought
|Item Dimensions||0.5 x 1.3 x 2.5 inches|
|Item Weight||0.05 pounds|
|Shipping Weight||0.1 pounds|
Top Customer Reviews
The reviews of these mounts do not adequately clobber the weak two-sided tape. Furthermore, if you expect to mount these to a helmet using the two-sided tape you are living in a fantasyland.
You will see what I mean when you get them and you go to peel off the adhesion protector, the two-sided tape will come with it. º
Knowing this in advance, I developed an alternate plan that involved Gorilla Glue and four-inch Bessey Clamps. Remove the two-sided tape and use a razor knife to cut some small gouges into the base, use a small piece of tape on the backside to cover the mount hole and lightly apply Gorilla Glue to the base. The four-inch clamps allow you to reach the both sides of the helmet to bend the base into place.
I took great care to align my mount prior to gluing and I taped the helmet off so that Gorilla Glue did not get all over my helmet. A bit of care and you can produce professional quality work. The mount works well, formed to the helmet and should hold through a hurricane.
I had a problem with finding all the accessarys I wanted for the camera but, I purchased at Amazon.com and they took care of the different companys involved and I recieved everything BEFORE the scheduled delivery date. Very happy. Gene-O, Houston, Tx.
Most Recent Customer Reviews
works great, I have this on my fire helmet and has gone through some heat and it is still sticking.Published 21 months ago by Michael Purcell
I am already using this product to mount a Contour camera and this is an extra set for another helmet. Good adhesion and fits to the profiles of the helmet.Published on October 2, 2013 by Russ
I purchased a Contour Camera as I believed the Contour to have better design and usability than the Go-Pro. Read morePublished on May 27, 2013 by noj
The photo is wrong. the photo shows a left mount and the discription said right side.
i need left and kind of went on the photo.
Took the mounts out of the package, the plastic protective over the adhesive was detached and fell off
The adhesive itself was dried out and would not stick to anything.. Read more