CoolGear SATA to SATA HDD/SSD Sector Cloning Device
- Enter your model number to make sure this fits.
- SATA Drive Cloning Hardware Solution, Simple and Fast SATA to SATA HDD/SSD Sector Copy
- Suitable for 2.5"/3.5"Serial ATA HDD
- Support USB 2.0 to Serial ATA interface, transter rates up to 480Mb/sec
- Support eSATA to Serial ATA interface,transter rates up to 3.0Gb/sec
- OS Compatibility:Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8 as well as Linux and Mac OS 10.X
Customers who viewed this item also viewed
What other items do customers buy after viewing this item?
Compare to similar items
This item CoolGear SATA to SATA HDD/SSD Sector Cloning Device
|Shipping||—||FREE Shipping||FREE Shipping||FREE Shipping|
|Sold By||Available from these sellers||Amazon.com||Amazon.com||Sunjak|
|Item Dimensions||6.5 x 8.4 x 2.7 in||7.68 x 15.08 x 10.63 in||7.5 x 9 x 3 in||6.26 x 3.27 x 5 in|
The SS-126ASD Adapter with USB 2.0 and eSATA Back-Up Software supports all makes and models of SATA I/II/III Hard drives ranging in Capacity form 20GB up to 64TB. This device is a perfect companion for any Test Bench, Power User or Forensic Investigator. It is also a great solution for any home users that have a large amount of data stored on multiple disks and need a fast reliable disk copy/back-up solution.
This hard drive copy device can clone any SATA 3.5″ Drive as well as 2.5″ of any capacity. This is a DO-IT-ALL HDD/SSD SATA Drive Adapter. This device will allow you to backup all of the files on your computer. Cloning your hard drive could not be made any simpler with this device. With it’s easy to install and removable design, the HDD duplicator uses the USB 2.0 connection to transfer files at a high rate of speed. You can transfer files even faster with the use of the eSATA port. It also supports hard drive migration, which is perfect for desktop or laptop drives.
Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8
Linux and Mac OS 10.X
Easy User Guide
USB 2.0 Cable 3ft.
eSATA Cable 3ft.
SATA HDD/Copier Device
eSATA Bracket (for your Motherboard)
SATA Drive Connection Cable (optional IDE PATA Drive Adapters available below)
Xp/Vista Back-Up Software
4A 110/220Volt Power Adapter UL/FCC Listed
Power Cable for AC Adapter
Top customer reviews
I downloaded a free version of Macrium Reflect software and this was very easy to use. A big plus was I did not have to remove the old hard-drive from the bay; just connect using the supplied USB cable from the laptop to the Cool Gear system. Another plus with the 3rd party software was either drive can be any size as long as the old data will fit on the new clone drive. It took about 2 1/2 hours to clone the old drive to the new solid state drive using USB (about 85GB). I put in the new drive, started the laptop, did a restart for the new solid state drive, and the Gateway hard-drive clone work perfectly. It would take 2 1/2 minutes to start my laptop; now, my laptop is up and running in 1 minute and apps open/close 40%-60% faster.
I tried to clone 2 Seagate Superspeed 1TB solid state hybrid drives and 2 Western Digital WD Scorpio Black 750GB directly using the Cool Gear with no success (same results with gateway hard-drives). I will just load the Macrium software and clone on the Dell E6510 laptops. The direct clone feature would be nice; but, I am 100% functional with the Cool Gear hardware and Macrium Reflect software.
button until it start flashing . It make a perfect copy. I clone my drive once a week and if it crashes, no problem
switch the drives.