- Brand Name: Cooler Master
- Model Number: RC-922M-KKN3-GP
- Item Package Quantity: 1
- Supported Motherboard: ATX
- Device Type: Cases
Cooler Master HAF 922 - Mid Tower Computer Case with High Airflow and USB 3.0
We don't know when or if this item will be back in stock.
- Enter your model number to make sure this fits.
- Extreme cooling performance that support up to seven cooling fans top to bottom as well as accommodates three 200 x 30mm fans at minimized noise
- CPU Cooler retaintion hole cutout design for quick CPU Cooler installation.
- LED ON/OFF switch for front 200x30mm fan. Black interior
- Patented button design for easy maintenance of 5.25¿ drive devices.
- I/O panel offers two USB 3.0 ports, one 3.5 mm headphone input, one 3.5 mm microphone input, and one eSATA port
Customers Who Bought This Item Also Bought
Cooler Master HAF 922 - Mid Tower Computer Case with USB 3.0 Ports
Following the overwhelming success of the full tower HAF 932, Cooler Master extends the HAF (High Air Flow) line to a mid tower in the HAF 922. This beastly chassis comes with rugged looks, massive air flow, and Cooler Master's trademark intelligently designed interior. Building the mean, dream machine is now well within reach.
|EXTREME AIRFLOW |
Supports up to 3 x 200mm fans to maximize airflow with minimal noise. Top and front 200mm fans are included.
|PLENTY OF ROOM TO WORK AND INSTALL |
Thoughtfully engineered to provide users with a spacious area to setup and install systems from the low to high-end.
|SUPERSPEED USB 3.0 PORTS |
Two ports are conveniently installed in the front panel to provide quick and easy access. These ports are backwards compatible with USB 2.0 devices.
- HAF 922
- Parts Box
- User Manual
HAF Series Comparison
|HAF XB||HAF 912||HAF 922||HAF 932 Adv.||HAF XM||HAF X (942)|
|Dimensions||442 x 330 x 423 mm |
17.4 x 13 x 16.7 in
|230 x 480 x 496 mm |
9.1 x 18.9 x 19.5 in
|253 x 502 x 563 mm |
10 x 19.7 x 22.2 in
|243 x 560 x 564 mm |
9.6 x 22 x 22.2 in
|252 x 530.5 x 579 mm |
9.9 x 20.9 x 22.8 in
|230 x 550 x 590 mm |
9.1 x 21.7 x 23.2 in
|5.25" Bays |
|3.5" Bays |
|1 Exposed |
one 5.25" bay)
|5 Hidden; |
one 5.25" drive bay)
|5 Hidden; |
one 5.25" drive bay)
|2.5" Bays |
(2 from X-Dock)
two 3.5" drive bay)
(6 are converted
from 3.5" bays,
X-Dock x 2,
1 is behind
the M/B tray)
5.25" drive bay)
|Side Panel Window||Yes, |
Optional Top Window
|All-In-One (AIO) |
|Single, Dual 120mm||Single, Dual 120mm||Single, Dual 120mm||Single, Dual, |
Triple 120mm / Single 140mm
|Single, Dual 120mm / 140mm||Single, Dual, |
Triple 120mm / Single 140mm
|M-ITX, mATX, |
|mATX, ATX||mATX, ATX||mATX, ATX, |
|mATX, ATX, |
|mATX, ATX, |
|Maximum CPU |
|180 mm |
Top 200mm fan
or 155mm / 6.1in
w/top 200mm fan
|Maximum Graphics |
|354mm / 13.9in |
463mm / 18.2in
w/o HDD cage
Top Customer Reviews
I was deciding whether or not to build my 2nd custom PC system or get one pre-built online. When I was building the 'dream system', I saw this case as an option. After deciding between 932 and 922 (both are relatively new models) I decided to actually build my system myself (again!!!). I was previously using RaidMax (Sagita series) case and Antec. After I saw the 932 in person I was shocked at how much bigger the case was compared to my Raidmax, so I decided to get a 922 (which looks better by the way), and I'm glad I did! I'm a serious overclocker, having my fans running at 100% speed (sorry no liquid cooling here:)...yet). The salesman mentioned that this case is the quietest he's ever seen, and he was right! After overclocking my Core i7 and jumping the fan speed up to 100% I still couldn't hear the PC. It was much better than my old Antec case, and way-way better than Raidmax. Inside there are plenty of options on the setup, as I was easily able to include my CoolerMaster V8 fan control on the rear (by the PCI slots), and my GTX285 - there's room for 2 sli video cards, eventhough the manual says you can put 3 in tri-sli mode. There's even a cool button on the top of the case where you can turn on/off the red led light on the front fan. One of the things I wanted to mention is: if you decide to overclock your pc, you'll need to add more fans. With the stock fans: front, top and rear, my cpu cores average 50C when idle - considering I got V8 as a cooler. The better setup would be to add 1 more front fan (there's room for 3! ), and a side fan as another intake.
Now, before I was really looking for a transperent side-panel.Read more ›
Everything mounts and aligns properly with minimal effort. Routing wires in this case is a joy when compared to some of the other cases I have used. They throw in some zip ties and with them you can neatly and effortlessly route and hide most of your cables. They give you enough space under the motherboard tray that you don't need to pack the wires and try to get the side of the case on before they all pop out like with some other cases. I agree with others that the case sides could slide into place a little easier but I have dealt with worse.
The included fans are quiet. I ended up replacing the rear 120mm fan with a Noctua and adding a couple more 120mm Noctuas to the side panel. They aren't pretty being brown and all but they are very quiet. There are no removable filters that I see but it does look like there is a finer grade of mesh behind the outer mesh in the front. I have always found that I get just as much buildup inside whether I have filters or not. Twice a year I just take my PC outside and hit it with compressed air from a air compressor. Any dust buildup is solved in a few minutes.
All the drive mounting hardware seems to function well. I like the removable drive trays. They seem easy to work well and help reduce the drive noise.Read more ›
The case comes with 3 fans total. A single 120mm exhaust fan at the rear and two 200mm fans, front and top. All of the fans are 3 wire so variable speed control is possible if supported by your MB or if using a fan controller.
There are 10 tooless bays for peripherals, and holes for an external water cooling system. The case offers plenty of room for full size vid cards in SLI or Crossfire setups. Case is also deep enough to accommodate just about any aftermarket Cpu cooler. The exception being if you added a 4th fan on the mesh side "red LED version" panel and had an extremely tall cooler. Easy enough to determine.
The best feature of this case is its airflow. It's just unsurpassed here. There are several options depending on which case you choose and the type of cooling you decide on. Of course with increased airflow comes the introduction of dust. To combat this, I removed the front panel of the case and lined all of the intakes with furnace vent filter material. It's thin and cheap, but offers exceptional protection by keeping dust from getting into your case. A pack of 12 filters lasts more than a year and will cost you about $3. I've looked for black foam, but haven't found it. The white filter doesn't bother me or detract from the case one bit.
The "red" version of the case comes with one LED fan on the front of the case. It can be turned off and on using a switch on the outside of the case. An LED fan for the side panel is optional.
My "blue" version was different. All 3 of it's fans are LED. The top and rear can be turned off or on using switches inside the case.Read more ›
Most Recent Customer Reviews
I ran a fx-8350 and a r9-280x and temperatures were great for a couple of years.
This unit can get noisy and is very high maintenance compared to other cases Extra dust... Read more
Got the case very quickly, much faster than expected delivery date and build my computer as soon as it arrived. Working great so far with no problems! Read morePublished 11 months ago by James Vine
Great casing. Comes with 1 Led light in the front. Overall you can't go wrong with this case.Published 12 months ago by Prince
This case is awesome! I like it alot. It's black inside out. Love the usb 3.0 connection in front.Published 13 months ago by Vu G.