|Item model number||CW-9060016-WW|
|Item Weight||4.1 pounds|
|Product Dimensions||9.8 x 5.3 x 13.3 inches|
|Item Dimensions L x W x H||9.76 x 5.27 x 13.3 inches|
Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
+ Free Shipping
Corsair Hydro Series H105 Extreme Performance Liquid CPU Cooler
|Price:||$103.99 & FREE Shipping. Details|
- Enter your model number to make sure this fits.
- Extreme CPU cooling performance with extra-thick 240mm radiator
- Take advantage of your case's 240mm radiator mount
- Protect your hardware and increase your CPU's overclocking potential
- Dual SP120L fans with PWM control for customized cooling performance
- All-new mounting bracket design for easy installation
- Includes three color accent rings to match your H105 to your motherboard
- Warranty: Five Years
Frequently Bought Together
Customers Who Bought This Item Also Bought
From the Manufacturer
Extreme CPU cooling with customizable PWM fan speed and a high-capacity radiator
Hydro Series H105 provides extreme CPU cooling performance. The 240mm top-mounted high-capacity radiator is paired with high-performance SP120L fans for the powerful heat dissipation you need for highly overclocked CPUs. And, PWM fan speed fan control lets you select the precise level of cooling power you need.
Installation is easy, with an all-new mounting bracket that provides quick, tool-free assembly. The three included red, gray and blue accent rings let you match your H105 to your fan or motherboard color scheme. And, like all Hydro Series liquid CPU coolers, the H105 is completely self-contained, with no filling or maintenance required.
Dual SP120L fans with PWM control for customized cooling performance
The SP120L fans are custom-engineered by Corsair to deliver higher static pressure with less turbulence and noise. Since they’re compatible with PWM fan headers, you can select the exact amount of cooling power you need.
Top Customer Reviews
The H100i V2 is simply a re-branded H100i GTX. I own both and can not find any discernible difference between them. The CPU core temps that were measured using HWinfo are basically the exact same. There was a difference of about 3 degrees under load but this is due more to the silicon lottery than the radiator. IMO buy whichever is cheapest at the time of purchase because the differences are not worth paying more for.
The fans on the radiator are SP120L PWM fans which are very solids fans however are still a bit loud for my liking. I have replaced them with Noctura Nf-f12 fans and it works amazing. Replacing the fans did not provide a decrease in temperature but will allow the system to run near silent. Here is a link to the fans that I purchased Noctua NF-F12 PWM Cooling Fan
Compared to an air cooled system you can expect to see a decent drop in temps anywhere from between 5-10C depending on the cooler you are using. If you are planning on Overclocking then I highly suggest you purchase a liquid cooler to protect the CPU from thermal throttle and silicon degradation. Honestly once you make the move to liquid cooling you will never go back.
A couple things I want to point out:
Installation is very easy however to install this cooler you will need to install a support bracket on the underside of your motherboard. For new builds this is not an issue at all since this is easily done before the board is installed into the case.Read more ›
I love the size of the H110 radiator, the new pump, and the lack of molex. I think the molex connector has to be phased out since I always have a problem plugging molex into my Corsiar AX1200. I ran into problem with mounting the H110 into my 650D. The tubes have to be on the right side of the radiator because the rear fan would interfere with a left side mount. An internal P/P configuration would not work with the H100 and will not work with the H110 as well. The configuration I choose was an exhaust push. One day, Ill have a P/P with fans on the outside of the case. I've done that with my H100. The kit does not come with short mounting screws. I had to use the screws that came with my H100. There is a piece of the 650D top HDD dock that interferes with the H110 radiator. I was able to mount the radiator to the top of my case using 6 out of 8 screws, which is sufficient enough but also looks messy. During my stress testing, I set the fans to spin at full speed. One of the fans started to rattle and then the other started to rattle as well. I already submitted a RMA on the fans. Here are my results using 20 runs on LinX:
4.8GHz, 74C max temp, 1.368V max VCore (could be lower with the 3305 BIOS), 24C ambient
4.9GHz, 82C max temp, 1.392V max VCore, 25.5C ambient
I was not able to hit 5GHz because the VCore was at 1.432V and that was too high for comfort.Read more ›
My 4790k idles at 25 celcius (without an overclock) and does not go above 49.
The stock fans are a bit loud even lowered to 800 rpm's. I ordered some SP120 Quiet Edition fans and I will see if the sound at idle is quieter.
Protip: It only comes with 8 screws to mount the fans. If you plan on adding another 2 fans you'll need also need to purchase 8 more 1 1/4" length x 6/32 thread screws.
I was a little worried about installing this thing as I've never installed a closed loop water cooling system before and didn't know what to expect, but it's extremely easy and very intuitive. If you've ever installed a heatsink on a processor, then this isn't that much different - at all.
One thing to note, when installing the backplate to the motherboard, the screws/standoffs do not always put pressure on the motherboard itself and may appear wobbly. I thought I did something wrong when installing it when I put the backplate and standoffs on since the whole backplate would shift about 1/4 of an inch back and forth. THIS ALL GET'S RESOLVED when you put the heatsink on and screw it to the standoffs. It will tighten against the motherboard and everything will be 100% snug.
If you're experiencing issues with the Corsair logo flashing when your computers under load, you may need to hop into your motherboard's BIOS and set the voltage on the fan port that connects to the pump/heatsink to always be at 100% and not variable based upon temperature.
I have an NZXT H440 case and the H105 fits in it like a GLOVE. I'm pretty sure these two were made for each other.
I didn't choose to upgrade my fans like a lot others have, the stock fans to me are very silent and generate enough airflow to cool the CPU down so I am happy.
Most Recent Customer Reviews
bu fiyata alabileceğiniz en iyi ürün, 395 TL gibi bir fiyata geldi. Türkler kaçırmasın ! :DPublished 4 hours ago by Amazon Customer
I am giving a negative review because i received from amazon 2 units missing parts back to back... Probably returns.Published 12 hours ago by kainoa fragas
The product is very good, but I would recommend making sure that when purchasing, you check all the parts. Read morePublished 16 hours ago by Amazon Customer
I upgraded from a H100i, and the drop in temps on my Amd Fx-9590 Oem Fx-series 8-core Black Edition from 48 C to 34 C under load. Read morePublished 18 hours ago by Jessica Hawthorne
Due to the backplate being poorly designed, washers meant for the heatsink must be modded to keep the backplate secured to the MBU. Read morePublished 1 day ago by Amazon Customer
Works great and extremely satisfied. Replaced my Antec Kuhler 920 with this Corsair cooler. There really is no comparison. Read morePublished 1 day ago by GobbleGobble