|Item Weight||65 pounds|
|Product Dimensions||27 x 22.5 x 12.5 inches|
|California residents||Click here for Proposition 65 warning|
|Item model number||36-560|
|Discontinued by manufacturer||Yes|
|Warranty Description||Delta Two Year Limited Warranty: Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a motor manufacturer's authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which as resulted from normal wear, misuse, abuse, or repair or alterations made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental of consequential damages resulting from defective products. This warranty is Delta's sole warranty and sets forth the customer's exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.|
DELTA 36-560 Deluxe Table Saw Package
We don't know when or if this item will be back in stock.
Customers Who Viewed This Item Also Viewed
From the Manufacturer
Top Customer Reviews
The problems with this table saw is that the table is too small. It is not long enough to handle plywood sheets without a lot of hassles and it is not wide enough to cross cut 8' long boards without the same amount of hassles. Because the table is so small the fence is only good to about 17 or 18 inches. The miter gauge that comes with this is plain awful. It wobbles in the slot so bad that your cuts can easily be off by an 1/8" from the start of the cut to the end. The miter gauge slot is also not the standard 3/8 x 3/4 (it is smaller) so any accessories you buy probably won't fit this slot. If you plan to expand, this is a show stopper and I am selling my table saw now and getting the 36-444 contractor's table saw because of this.
Here is the bottom line, this table saw is only good for the very novice users and even then it won't take long to out grow this table saw. My suggestion is to spend an extra money and get a much nicer table saw.
Some gripes I have with it are
1) the miter gauge that it ships with is junk - the bar doesn't sit in the slot very tightly (I think this is fairly typical with most cheap saws)
2) the end of the rip fence where the handle joins the fence protrudes very slightly towards the blade so that when you are ripping long items it pushes the stock away from the fence, resulting in uneven cuts (potentially dangerous too if the stock binds against the blade)
3) blade tilt mechanism isn't really a mechanism.. it just slides around so you can't rely on the degree scale on the front
All in all it's a decent little saw. However, if you can afford it I would jump up to the next level saw that Delta makes. It's [price]and seems to be much better. Just go to a store where they are both set up side by side and adjust the rip fences. You'll see what I mean.
In contrast with Delta's low end equiptment, I have had great experience with DeWalt and Makita models -- both are, however, in a slightly higher price range.
Most Recent Customer Reviews
I am a professional woodworker and I have heavy duty professional tools in my shop. I purchased this saw because I needed something that was light and portable to carry to... Read morePublished 22 months ago by James M. Barnhardt
I've had this machine for 3-years. Unless you just want to rip 2x4's for framing, run away from this purchase. Read morePublished on December 13, 2004 by Craig A.
I JUST BOUGHT A DELTA 36-680 OR SO I THOUGHT.THE BOW SAID 36-679 ON THE BOX .THE SAW ISNT REALLY A 36-680 DELTA TOLD ME THERES NO ACTUAL 36-680 THATS JUST THE EXTRA PARTS. Read morePublished on October 10, 2004 by FASTER220
I bought this saw about 6 weeks ago to replace an ancient Craftsman. I wanted to use it a while before forming an opinion and my opinion is... Read morePublished on October 20, 2002 by James D.Ham
I should have spent another 100 bucks and bought a better quality saw. No such thing as a bargin! The Delta 10" table saw is a poorly made product produced in Tiawan. Read morePublished on October 17, 2002 by Red Rider
I've owned this saw for a year. The price of this saw is its main appeal. It's also portable.
However, it has many drawbacks. The miter slot is loose and inaccurate. Read more
I initially gave this saw 5 stars. Not sure what I was smoking that day. After using this saw for about a month, I got so sick of the small table and terrible fence that I went out... Read morePublished on January 15, 2002 by Jason Drury
I bought this saw in November of 2000. It was my first table saw. I'm was setting up a shop in my garage to build a little furniture and stuff for around the house. Read morePublished on January 14, 2002 by John M Peragine