DJI Phantom 3 Landing Gear Stabilizers
Fulfillment by Amazon (FBA) is a service we offer sellers that lets them store their products in Amazon's fulfillment centers, and we directly pack, ship, and provide customer service for these products. Something we hope you'll especially enjoy: FBA items qualify for FREE Shipping and Amazon Prime.
If you're a seller, Fulfillment by Amazon can help you increase your sales. We invite you to learn more about Fulfillment by Amazon .
- Enter your model number to make sure this fits.
- Fits DJI Phantom 3 Professional, Advanced, 4K, Standard Drones
- Secure snap-on design for quick installation and removal
- Widens stance to prevent tipping over during takeoff/landings
- Raises aircraft up 1 inch-keeping camera away from dirt/sand
- 5 year warranty with PolarPro support (US Based)
Frequently bought together
Customers who bought this item also bought
From the manufacturer
DJI Phantom 3 Accessories By PolarPro
PolarPro designs high quality accessories for the DJI Phantom 3 series. Each Phantom 3 accessory is crafted out of an extremely durable glass filled nylon. PolarPro also designed the Phantom 3 Accessory line to be as light weight as possible. Every PolarPro Phantom 3 accessory comes with a limited lifetime warranty.
Purpose Built Phantom 3 Accessories
Landing Gear Stabilizers
The PolarPro Landing Gear Stabilizers provide the Phantom 3 with a wider stance for landing and taking off on uneven terrain. The landing gear easily snaps on/ off for quick and easy storage.
Gimbal/ Camera Guard
The PolarPro Gimbal Guard for the Phantom 3 protect the gimbal and the camera from rough landings and crashes. The Gimbal Guard stays clear of the camera and Phantom 3 sensors.
Lens Cover/ Gimbal Lock
The PolarPro Lens Cover/ Lock for the Phantom 3 protects the cameras lens during travel. It also prevents the gimbal from moving and being damaged. It is also compatible with PolarPro Filters installed.
High Quality Phantom 3 Protection
No More Tip-Overs
The Landing Gear provides the Phantom 3 with a more stable landing platform. It prevents the Phantom 3 from tipping over during takeoff / landing. In addition it lifts the camera 1 inch off the ground keeping it free from dirt/sand/rocks.
Simple Camera/ Gimbal Protection
Slide in the Phantom 3 Gimbal Guard and worry less about rough or crash landings. The Gimbal Guard adds an additional layer of protection when your Phantom 3 lands harder than expected on a hazard.
The soft touch coating on the Lens Cover protects your Phantom 3 camera lens and also locks the Gimbal in place. Simple to install and remove. An inexpensive way to protect the most important part of your camera.
|Item Dimensions||6 x 1 x 2 inches|
|Item Display Weight||0.3 grams|
|Shipping Weight||0.15 pounds|
The PolarPro Landing Gear for the Phantom 3 increases stability of the Phantom 3 by widening the stance. The Landing gear securely clips onto the legs for easy installation and removal. By widening the legs the Phantom 3 is less prone to tipping over during rough takeoff’s and landings. The landing gear also enables the Phantom 3 to take off from uneven surfaces. In addition to the wider stance, the legs also raise the Phantom 3 up by 1 inch to keep the camera further away from the dirt. The Landing Gear is a great addition to help protect your DJI Phantom 3.
Top customer reviews
+ Very high quality (you get what you pay for). It is very firm and takes considerable force to flex. Also, it has a nice, soft rubberized surface that reminds me of many phone cases.
+ Snaps in and out of the legs on the phantom in seconds. This allows me to pop it on and off whenever I fly allowing me to store the protector in the side slot of my hardshell case.
+ Does NOT get in the way of the camera. Others say that the protector gets in the way of the camera either when the gimbal is doing its warm-up dance or during filming. This is NOT the case. The protector is asymmetric so if it could be put on backwards, possibly obstructing the camera. When installed properly however, it does not obstruct the camera in anyway.
- Expensive compared to others (again you get what you pay for). When it comes to protecting the $1000 I put into my drone, I'd rather spend an extra $8 on a protector that has a better chance of saving my expensive investment. This is person preference.
*** I have yet to crash my P3A to test how well the protector works and my review is solely based of initial impressions from 1 month of use.
Perhaps the guard works well with the Phantom 3 Advanced / Professional models, but it is not compatible with the Standard (and I feel that the product description should be edited to include that). Quality wise, this guard appears to be an excellent product and I would have loved to have been able to use it.
On the P3S, the factory gimbal lock was a right pain to remove - I would squirm each time thinking I was going to break something getting it off, and putting it on was even more of a pain. The DJI supplied camera/lens cap was just as "enjoyable" to use.
The Polar Pro Filters DJI Phantom 3 Lens Cover and Gimbal Lock is a very nifty device that replaces the lens cover. The arm then clips onto the base plate of the gimbal.
It's a neat device, but is not perfect. Too much slop on the camera housing/lens cap, and a bit fiddly to clamp onto the gimbal mount. Nonetheless, once it is on it is fuss free, and is quite fast to put on and off. I just wonder if the few millimetres of slop/rattle around the camera are enough to damage the gimbal over time? I guess putting some foam lining on the inner edge would eliminate this, but let's face it, when something is meant to fit a certain device, it should fit. It is not like DJI has 50 different camera sizes.
In summary, it beats the pants of the DJI factory lens cover and gimbal lock as far as user friendliness goes, but it does has its faults.