Currently unavailable.
We don't know when or if this item will be back in stock.

Add to List

Added to

Unable to add item to List. Please try again.

Loading recommendations for you

We do not have any recommendations at this time

Continue shopping

Delphi FJ10565 Fuel Injector

Visit the Delphi Store

111 ratings

| 13 answered questions

Currently unavailable.

We don't know when or if this item will be back in stock.

This fits your .

Make sure this fits by entering your model number.

Accurate, tightly controlled fuel spray pattern for more efficient fuel vaporization, reducing unburned hydrocarbon emissions
Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability
Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts
Mulitifuel capability

› See more product details

Customers who viewed this item also viewed

Page 1 of 1 Start overPage 1 of 1

Products related to this item

Sponsored
Hide feedback

Page 1 of 1Start overPage 1 of 1

Customers who bought this item also bought

Page 1 of 1 Start overPage 1 of 1

See all vehicles this product fits.

Compare with similar items

		ACDelco 217-3028 GM Original Equipment Fuel Injector Kit with Bracket	Standard Motor Products FJ503 Fuel Injector	TamerX Vortec Spider Fuel Injector Assembly With Plenum Gasket Kit for Chevrolet/GMC 4.3L	TamerX Vortec Spider Fuel Injector Assembly for Chevrolet/GMC 4.3L

Customer Rating	(111)	(382)	(348)	(174)	(84)
Price	Unavailable	$266.74	$219.78	$189.95	$179.95
Sold By	—	Auto Accessory Depot	Amazon.com	TamerX	TamerX

Compare with similar items

Special offers and product promotions

Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Amazon Business : For business-only pricing, quantity discounts and FREE Shipping. Register a free business account

Have a question?

Find answers in product info, Q&As, reviews

There was a problem completing your request. Please try your search again later.

All Product Information Customer Q&A's Customer Reviews

Product information

Technical Details

Manufacturer

Delphi

Brand

Delphi

Item Weight

1 pounds

Product Dimensions

1.4 x 1.4 x 4.2 inches

Item model number

FJ10565

Manufacturer Part Number

FJ10565

OEM Part Number

FJ10565

Additional Information

ASIN

B001J63ILW

Customer Reviews

111 ratings

4.4 out of 5 stars

Best Sellers Rank

#1,309,061 in Automotive (See Top 100 in Automotive)
#3,368 in Automotive Replacement Fuel Injectors

Date First Available

October 10, 2007

Feedback

Would you like to tell us about a lower price?

Product guides and documents

Product Documentation (PDF)

Product description

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.

What other items do customers buy after viewing this item?

Page 1 of 1 Start overPage 1 of 1

Products related to this item

Sponsored
Hide feedback

Page 1 of 1Start overPage 1 of 1

Customer Questions & Answers

See questions and answers

Customer reviews

5 star		67%
4 star		19%
3 star		5%
2 star		4%
1 star		5%

How are ratings calculated?

Top reviews from the United States

There was a problem filtering reviews right now. Please try again later.

Good Product, Bad Regulator

Reviewed in the United States on August 31, 2015

Verified Purchase

Great fuel injector upgrade, BUT you should/ will need to replace the pressure regulator! I had mine go bad after 75 miles or so. Got harder and harder to start and black smoke out of the tail pipe. I had a new BWD regulator on my old injector body, should have just replaced it right away, but took a chance and got bit. Had to tear apart he whole plenum again (I'm getting really good at it, though!).

If you're having a lean condition, usually p0171/p0174, then replacing the injectors should solve the problem. I have replaced a bunch of things on my 98 blazer but this is the only thing that fixed it.

12 people found this helpful

Helpful

Sto

Yeeahhp!

Reviewed in the United States on March 10, 2016

Verified Purchase

Easy install took 2 hours including the time it took for cleaning the inside of plenum and on top of the lower intake manifold. Routing lines so that they don't kink or interfere with mounting the upper plenum is the most difficult part of this project. Only needed a few tools, shown in my photo. I have slightly better throttle response and more torque. MPG is way up! I rode all the way to work on empty 24 miles. The boxes the item came in are absurdly large in comparison with the product as shown in my photo with the old injector as reference. This is a real Delphi part. It says Delphi on all of the injectors. Bracket and mounting screw were included, but I reused the factory hardware. Mine came with a different pressure regulator than whats shown in the listing photo.

3 people found this helpful

Helpful

james b

Delphi FJ10565 Fuel Injector - great price- $172.50 came with bracket

Reviewed in the United States on October 31, 2010

Verified Purchase

I bought this for 2000 chevy blazer, 4.3L (W) engine. It came with the bracket so I did not need the bracket I ordered. Although the kit only came with the o-ring for the injector body and manifold, you would still need to buy the upper intake manifold gasket kit for the other 2 gaskets (upper manifold gasket and the throttle body gasket). The problem I had with my truck was the check engine light was on "P0135 random misfire code", rough running, and hard starting when hot. When I checked the fuel pressure, the pressure dropped to near zero within a minute of turning the key on and then again it would drop to zero within a minute of turning the key off. When I pulled off the manifold it was obvious that fuel pressure regulator. This kit came with a new fuel pressure regulator and is the upgraded SCPI Conversion to MFI version which eliminates the poppet injectors. If you knock off the cost of the regulator, the cost of the kit about equaled the cost of just one new old style injector, So its a good buy and it saved me time of performing a diagnostic and installing new o-rings on the original injectors. The new injection system took me 2 evenings to replace and the truck runs great. I was pleasantly surprise to see that these injectors were still Made In USA.

28 people found this helpful

Helpful

Mike Tripoli

So simple to do and makes such a drastic difference, I wish I had done this years ago

Reviewed in the United States on July 28, 2014

Verified Purchase

I'm going to try and keep this short. I had an on-going "hard start" problem that was driving me nuts (the colder the weather, the easier the car started - a 1998 Oldsmobile Bravada). If it was cold out, a single turn of the key and the car started right up; the hotter it was outside the longer it would take to crank and pump the gas a bit). After a a discussion with a mechanic he mentioned it might be "the spider" had a cracked line. A bit of research and I ordered this unit.

Without exaggeration, from start to finish it took about 3 hours to replace this unit. If I recall, the whole thing can *almost* be done with one 10mm socket wrench. This includes being a bit anal about things and cleaning all the parts, running out for coffee, stopping to take phone calls... Once done, literally, though they say you need to prime the system by turning the key on/off a couple of times to run the fuel pump, I did none of that. I turned the key and it started right up and ran perfectly.

Had I known how incredibly easy this was to do I would have done it years ago. Changing the plugs on this motor is more of a hassle than changing this unit out. If you do your own work, don't even hesitate - you will not regret it.

One person found this helpful

Helpful

snarf

Good replacement for 98 Chevy Silverado V6 Fuel injector spider

Reviewed in the United States on November 13, 2013

Verified Purchase

I purchased this for my 98 Chevy Silverado V6. I had been having problems for a month or so before the fuel pump died on me. I replaced the pump, which was indeed dead, but it didn't fix the rough idle, low power, and stalling problems. I spent a few hundred dollars replacing other parts (MAF sensor, TPS, MAP sensor, etc) trying to trace the problem before taking it to a mechanic who threw it on his $10k machine and told me the fuel injector spider was bad. Everything I read said to replace the old poppet style with this newer version which GM switched to on the newer engines anyway. It swaps right in with no problems. Now the truck is running like a champ. I wish I had just swapped this out first, and if you have similar problems, you might want to do the same. There are plenty of DIY articles about doing it, and it's very easy.

2 people found this helpful

Helpful

D. Payne

Just what I needed to get rid of my random misfire.

Reviewed in the United States on April 27, 2013

Verified Purchase

I installed this in my 1996 Astro van motorhome at 141K miles. Improved my mpg and got rid of the hesitation while accelerating problem I was having. The new bracket that came with it was obviously not designed for a 1996 engine. There was no way to locate it precisely before tightening the bolt. So I reused my old bracket. Since the upper forward part of the old bracket would contact the new plastic fuel lines (not good), I cut the extensions off the bracket to conform to the design of the new bracket. Be advised if you decide to replace the throttle position sensor, idle control valve, and MAP sensor (like I did) while everything is apart, you should order them from Amazon because they're likely to have the best price. Be sure to use 242 thread locker on all the bolts that originally had thread locker on them.

One person found this helpful

Helpful

Pookie Jones

Faulty Pressure Regulator

Reviewed in the United States on September 24, 2013

Verified Purchase

This injector came with a fuel pressure regulator. I installed the injector with the regulator and everything was fine for 1 day. My GMC Jimmy was running better... no check engine light... BUT Then all of a sudden while at a traffic light my truck began to idle rough and check engine light came on... white smoke from tail pipe with heavy gas smell... took it to a mechanic who tested fuel pressure. Result was bad/faulty regulator that came with injector... fuel pressure psi was jumping everywhere when for my truck (1996 GMC Jimmy) pressure should be constant 60psi... with a bad or faulty fuel pressure regulator the new injector is worthless as truck will not run because gas will be dumped and come out unburned thru tailpipe.

3 people found this helpful

Helpful

Pages with related products. See and discover other items: 2003 chevy 4.3, fuel injector, fuel injectors for chevrolet vehicles


	We're sorry!

	We encountered an error while updating the page. Please hit the "Reload" button on your browser.

2020s

2010s

2000s

1990s

1980s

1970s

1960s

1950s

1940s

1930s

1920s

1910s

1900s

1890s

2020s

2010s

2000s

1990s

1980s

1970s

1960s

1950s

1940s

1930s

1920s

1910s

1900s

1890s

2020s

2010s

2000s

1990s

1980s

1970s

1960s

1950s

1940s

1930s

1920s

1910s

1900s

1890s

2020s

2010s

2000s

1990s

1980s

1970s

1960s

1950s

1940s

1930s

1920s

1910s

1900s

1890s

2020s

2010s

2000s

1990s

1980s

1970s

1960s

1950s

1940s

1930s

1920s

1910s

1900s

1890s

2020s

2010s

2000s

1990s

1980s

1970s

1960s

1950s

1940s

1930s