Have one to sell?

Delta 36-5052 10-Inch Left Tilt Contractor Saw with 52-Inch RH Rip (Steel Wings)

Visit the Delta Store

29 ratings

Available from these sellers.

This fits your .

Make sure this fits by entering your model number.

Item may ship in more than one box and may arrive separately
Unique Tubular Stand for maximum support and stability
Heavy duty one piece rail system for precision cuts every time
Blade Brake stops the blade within seconds of the power being turned off
Heavy duty RH extension board with support legs
Large, easy to access ON/OFF switch

› See more product details

Customers who viewed this item also viewed

Page 1 of 1 Start overPage 1 of 1

This shopping feature will continue to load items when the Enter key is pressed. In order to navigate out of this carousel please use your heading shortcut key to navigate to the next or previous heading.

2
2 offers from $1,399.00
9
1 offer from $1,639.40
33
1 offer from $1,880.25
3

$1,149.97
Temporarily out of stock.
3

$1,943.88
Usually ships within 6 to 10 days.
51

$2,229.00
Usually ships within 6 to 10 days.

Customers who bought this item also bought

Page 1 of 1 Start overPage 1 of 1

152

$51.60
1,366

in Electrical Conduit Fittings
$6.96
471

$9.99
230

$289.99
479

$13.59
968

in Power Tool Replacement Parts
$7.10

What other items do customers buy after viewing this item?

Page 1 of 1 Start overPage 1 of 1

Special offers and product promotions

Amazon Business : For business-only pricing, quantity discounts and FREE Shipping. Register a free business account

Have a question?

Find answers in product info, Q&As, reviews

There was a problem completing your request. Please try your search again later.

All Product Information Customer Q&A's Customer Reviews

Compare with similar items

		DEWALT (DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity	DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)	DEWALT Table Saw Stand for Jobsite, 10-Inch (DW7451)

Customer Rating	(29)	(1326)	(832)	(620)
Price	From $1,880.25	$599.00	$399.00	$71.51
Sold By	Available from these sellers	Amazon.com	Amazon.com	Amazon.com
Included Components	Saw, fence, miter gauge, wings, push stick, blade, guard, blade bold, wrench, Table board, Leg set	Construction - Power Saws, Concrete Saw, Power Reciprocating Saw	(1) DWE7485 8-1/4 in. Table Saw; (1) Fence; (1) Anti-Kickback Pawls; (1) Miter Gauge; (1) Push Stick; (1) 24T 8-1/4 in. Blade; (1) Non-thru cut riving Knife; (2) Blade Change Wrenches; (1) Modular Guard System	1) Table Saw Stand
Item Dimensions	33.00 x 83.00 x 44.00 inches	31.00 x 24.50 x 31.00 inches	26.65 x 14.08 x 27.15 inches	22.80 x 21.70 x 3.60 inches

Compare with similar items

Product description

DELTA 10 in. 15 Amp Left Tilt Contractor Saw with 52 in. RH Rip that feature a large on/off switch, Heavy duty fence with dual rip windows, and industry standard tool-free split guard design
Motor: 15 Amp Induction Motor, 1 PH, 60 Hz

Voltage: Dual Voltage 120V – 240V

Arbor: 5/8 in. Blade Tilt: 45° Left

Max. Depth of Cut at 90°: 3.5 in.

Max. Depth of Cut at 45°: 2.25 in.

Max. Rip Right of Blade: 52 in.

Max. Rip Left of Blade: 15 in.

Table Size: 20 in. wide X 27 in. deep (40 in. wide X 27 in. deep with WINGS and 76-1/2 in. wide with extension board)

Dado Capacity: 13/16 in. X 8 in. STACKED DADO

Dust Port Size: FIT 2-1/2" HOSE (WITH 4" ADAPTER)

Width with Fence: 83 in.

Product information

Technical Details

Manufacturer

Delta Power Equipment Corporation

Part Number

36-5052

Item Weight

233 pounds

Product Dimensions

33 x 83 x 44 inches

Item model number

36-5052

Is Discontinued By Manufacturer

Style

52 in. Rip Capacity

Item Package Quantity

Included Components

Saw, fence, miter gauge, wings, push stick, blade, guard, blade bold, wrench, Table board, Leg set

Batteries Included?

Batteries Required?

Technical Specification

User Manual [PDF ]

Additional Information

ASIN

B00LHUWABO

Customer Reviews

29 ratings

3.1 out of 5 stars

Best Sellers Rank

#357,344 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
#92 in Table Saws

Date First Available

July 2, 2014

Customer Questions & Answers

See questions and answers

Customer reviews

5 star		47%
4 star		5%
3 star		4%
2 star 0% (0%)		0%
1 star		43%

How are ratings calculated?

There was a problem filtering reviews right now. Please try again later.

Amazon Customer

Over all a good saw

Reviewed in the United States on November 12, 2019

Verified Purchase

Overall it is a good saw, cuts nice and it is accurate which is most important. So far everything is good, however I am not sure what I will do if I have to replace the belt as it looks like it is not easy to get to, but I guess I will cross that path when I have too. Assembly was not hard as everyone said, it wasn't a breeze either but if you take your time and study the drawings and use common sense you can pretty much figure it out. One user put this in his reviews on Amazon and he was spot on so I will repeat it.
"A Quick Screw/Bolt Summary (how I interpreted the directions):
- Black Short Phillips Machine Screws (16) - Attaching the 4 Flat panels between the legs.
- Black Short Hex Machine Screws - Attaching the measuring bar to the front rail.
- Black Flat Head Hex Machine Screws - Attach Front Rail to Side Extension Tables
- Black Flat Head Hex Machine Screws with Silver Crown Washer - Attach Front Rail to Unit
- Silver Flat Head Machine Screws - Attach Front Rail to wood table. (1/4 inch drill bit)
- Black Regular Bolt Screws - Attach Back Rail to Unit
- Silver Regular Bolt Screws - Attach Back Rail to wood table. (1/4 inch drill bit)
- Silver Round Head Phillips Machine Screws (Thinner Ones) - Attach the leg bracket to the table side. (I used a 3/16 drill bit)
- Black Short Wood screws - Attach the legs to the bottom of the table."

I was surprised at how quiet it is, my vacuum system is much louder. Overall I would recommend this saw for the price point as well, it is nice to have the side table to work with. I did have to add half inch blocks under each leg to allow the legs to be adjusted for height without fully extending the screws. I had to adjust the fence but once I did that it was perfect, the riving knife was right on so it was not an issue for me. I hope it lasts a long time...

5 people found this helpful

Helpful

Comment

Mark The Twain

Delta Table Saws Rule! A must have Table Saw.

Reviewed in the United States on August 12, 2019

Verified Purchase

I have used Delta saws for years. This was the 1st time I have purchased a smaller saw and I am happy so far.
The long table is super nice as they were with my other Delta table saws, however this seems to have some issues with sliding fence. It's super tight and hard to move. I have to figure it out as to why this is happening.
As soon as I use it for a few weeks I will edit this feedback and let you know what I think.

The delivery was wonderful. It arrived in perfect condition. I would say this is well worth the money especially since this was the cheapest price I had found anywhere on this saw.

If you are seriously considering this Delta table saw, GO FOR IT! The saw is great and the seller is wonderful.

3 people found this helpful

Helpful

Comment

Knight

PARTICLE BOARD

Reviewed in the United States on March 17, 2020

Verified Purchase

The side table is made of particle board. We all know what happens to particle board when it gets ANY moisture near it! Delta is supposed to be one of the best. They made a decent saw but CHEEPED OUT ON THIS EXTENSION TABLE. The adjustable feet on the right table have to be extended out so far to level this side of the saw that you are literally on the last thread of the adjustment. Delta does not give you lock washers for the hardware that holds the particle board table to the rails or the legs. You have to drill your own holes. Delta was too cheap to pre drill this table. Legs are flimsy and the bolts that hold them pull into the CHEAP particleboard when tightened. I added large washers and lock washers. DELTA SHOULD BE ASHAMED AND EMBARRASSED OF THIS EXTENSION TABLE ! UPDATE, 05/04/20 MADE ABOUT 5 CUTS AND FENCE TRACK IS SEPARATING FROM (MDF) I WOULD LOVE TO POST A PIC BUT AMAZON DOES NOT HAVE A AN ATTACH PIC ABILITY.

Helpful

Comment

Someone in ABQ

DON'T BY DELTA!!!!

Reviewed in the United States on July 31, 2020

Verified Purchase

After 6 months, using the saw only 6 or 7 times, the motor is seizing; Delta will honor the warrant IF I bring the 233-pound item to a service center 250 miles away, With no vehicle large enough to handle the unit, and no way to get the 233-pound item up the steps from my shop even if I had a vehicle, I have just thrown away my money and will NEVER, NEVER by Delta again. Customer service was rude, and unwilling to explore alternatives to resolve my issue. This item and Delta customer service deserves not one star. And of course, no manager was available to escalate the issue to. I don't even know how I will get the unit out of my shop to replace it with something else.

Helpful

Comment

Steven Osborne

Nice saw !! And worth the $$

Reviewed in the United States on December 24, 2019

Verified Purchase

After purchasing I read the reviews on assembly nightmares. Delta must have upped thier game.. assembly was a breeze . All the hardware was Clearly marked and pre-packaged for each step. It took a couple hours but went together easily following the instruction manual.. out of the box the saw was close but did require fine adjustments.. nice addition to any woodworking shop ! My only suggestion would be an assembly video on the delta site that showed how to fine tune the saw and fence to square up everything. They saw runs quieter than you would expect and stops quickly.. I've only had it for a couple of weeks and havent tried any cuts that require a great deal of precision yet but it appears to be a very solid and well built saw.. great alternative to the more expensive saws In this class.

Helpful

Comment

robert damelio

Great Deal

Reviewed in the United States on October 20, 2019

Verified Purchase

Quality Accurate Saw Fast Delivery

One person found this helpful

Helpful

Comment

JORG W. SCHROEDER

very decent product

Reviewed in the United States on June 9, 2015

Verified Purchase

I've been waiting for ~ a couple of weeks before I post a review;

first of all, assembling is a serious pain, even with 2 people; I am not a novice but it took ~ 4 hours to get that beast up and running;
main problems were wrong drilled holes, which I've needed to adjust, and that was time consuming;

after a lot of sweat I can say that this saw runs very, very smooth and I am pretty satisfied;
building professionally for the past 17 years; my last saw lasted longer than 10; if I get the same out of this one then I'll be pleased

9 people found this helpful

Helpful

Comment

Solar1

Tremendous value

Reviewed in the United States on January 23, 2020

You would be hard pressed to find a better value in a table saw. Despite the gloom and doom of the internet, assembly was straightforward and everything ends up square and level. Adjustments and tuning of the blade, riving knife and fence were likewise easy to accomplish. This saw is quiet and has very little vibration. I swapped the blade for a Diablo with 50 tooth for general use right out of the box. Test cuts were accurate, square and very clean. Sawdust management is good for an open base saw. One tip - put the wheel lifting lever on the left side of the base. It doesn’t care as everything is symmetrical but it’s a bear to move this when it’s on the side with the long extensions. Highly recommend this saw.

One person found this helpful

Helpful

Comment