While you will definitely need a flat open place in your freezer to make these cool cubes (pun intended), they are definitely different than what you normally expect to see in your glass when you have a drink. I went to a place in Johnson City TN where the bartender offered "big ice." That was the inspiration for this purchase, and I'm glad I bought them. These are neat, and practical too. A larger piece of ice then what my refrigerator door delivers, will definitely keep your beverage colder without diluting your drink. With Halloween on the way, it's an appropriate skull shape, too. I will probably use these cubes in the pool room, rather than the dining room. The black molds are made of a tough, durable silicone, that was real easy to clean. To make them, I placed the water filled mold in a tray, before placing it in the freezer drawer in case someone went in there before they had time to freeze. It's possible that they could spill if somebody bumped them, but the two pieces of the mold fit perfectly within themselves to create the distinctive, somewhat detailed shape of ice. This was a good product for the price. Delivery was quick, and the box the 2 molds came in can be reused.
Additional Details
Small Business
Shop products from small business brands sold in Amazon’s store. Discover more about the small businesses partnering with Amazon and Amazon’s commitment to empowering them.
Small Business
This product is from a small business brand. Support small.
Frequently bought together
This item: SHAPED 3D Large Skull Ice Cube Mold Tray, Round Whiskey Ice Mold with Lid for Whiskey Drinkers, Bartenders, Gift Exchanges, Home Bar Enthusiasts and Holiday Gifts
$12.99
Get it as soon as Wednesday, Oct 23
In Stock
+
$12.99 ($3.25/Count)
Get it as soon as Wednesday, Oct 23
In Stock
+
$13.99 ($1.01/Ounce)
Get it as soon as Wednesday, Oct 23
In Stock
Total price: $00
To see our price, add these items to your cart.
Choose items to buy together.
Similar items in new arrivals
Page 1 of 1 Start overPage 1 of 1
OXO Good Grips Covered Ice Cube Tray Set,Blue,2 Pack$15.54 shippingGet it as soon as Tuesday, Oct 29Only 14 left in stock - order soon.
Skull Silicone Mold and Brain Silicone Mold Set, 3D Skull Ice Cube Mold for Whiskey, Skull Chocolate Mold for Halloween Party Decoration Jelly Fondant Crayon, Pack of 2$11.66 shippingGet it as soon as Tuesday, Oct 29Only 1 left in stock - order soon.
Round Ice Cube Mold 2.5 Inches Sphere Ball Maker Tray Molds Silicone Whiskey Cocktails Bourbon Drinks Set of 2$13.04 shippingGet it as soon as Friday, Oct 25
Gothic Novelty SKULL CROSSBONES ICE CUBE TRAY Gelatin Mold Pirate Birthday Party$12.31 shippingGet it as soon as Wednesday, Oct 23Only 9 left in stock - order soon.
Clear Ice Cube Mold - Skull Whiskey Clear Ice Cube Maker - Crystal Large Skull Ice Cube Mold for Whiskey,Cocktail,Bourbon Drinks - Halloween Ice Molds - Whiskey Gifts - 2024 New Patent$12.40 shippingGet it as soon as Tuesday, Oct 29
Product Description
Introducing the ultimate way to chill your drinks
Shaped 3D Silicone Ice Molds! Our molds are perfect for creating not only realistic skull-shaped ice cubes but alien skull-shaped ice cubes and giant spheres that will elevate your drinks to a whole new level.
Made from high-quality, food-grade silicone, our ice molds are durable, flexible, and easy to use. Simply fill the mold with water, place it in the freezer, and in no time, you'll have ice cubes of fun shapes ready to impress your guests.
The unique design of our ice molds ensures that your ice cubes will last longer and melt slower, keeping your drinks cold without diluting them. Plus, the intricate details add a touch of intrigue and sophistication to any drink.
Not just for cocktails, our molds can also be used for creating frozen desserts, chocolates, and even soaps. It's versatile and perfect for any occasion, whether it's a Halloween party, a themed event, or just a fun night in.
With their sleek and stylish design, our 3D ice molds are the perfect gift for any cocktail enthusiast or Halloween lover. So, upgrade your drink game and add some flair to your next party.
Our Ice Cube Molds aren't just for cooling your beverages – they're conversation starters.
|
|
|
|
|---|---|---|
Make Every Last Drink Sparkle & ShineRise above the ordinary with the most fun shapes created by Shaped. |
Keep Drinks Colder For LongerAvoid watery drinks by using these large, slow-melting cubes to chill your drink. |
Chill All DrinksSpice up your cocktails, mocktails, cold brew coffee, soda, lemonade, punch, and more. |
Make your gatherings memorable with ice that's as interesting as your guests' chatter.
|
|
|
|
|---|---|---|
Add Fun to Special DayCreate special ice cubes for a distinctive and unique look for your events. |
One & Only ShapesImagine a skull head or alien head staring at you from your chilled drink. |
More Than An Ice MoldNot only exciting drinks but also spooky chocolates, silky soaps, macabre candles, and more. |
|
|
|
|
|---|---|---|---|
| 3D Skull Ice Mold | 3D Ancient Alien Mold | 2.75" Grande Skull & Sphere Ice Molds Set | |
| Customer Reviews |
16,231
|
717
|
101
|
| Price | $12.99 | $14.99 | $9.99 |
| Shape | Skull | Ancient Alien | Skull & Sphere |
| Size | 2" x 2.36" | 2.25" x 2.25" | 2.75" x 2.75" |
| Capacity | Makes 4 | Makes 4 | Makes 2 Extra Large |
| Comes in a Gift Box | Yes | Yes | Yes |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
2:40
Click to play video
Spirits & Skulls: A Mold for Bold Beverages
Why Yes Please
Videos for this product
0:57
Click to play video
Made some ice skills first time
Anthony's really sweet
Videos for this product
0:58
Click to play video
How to Use Dine Asia 3D Skull Ice Tray
LuceroTech
Videos for this product
0:40
Click to play video
Spice up your drink with these 3-D Skull Ice molds
Quan K.
Videos for this product
0:27
Click to play video
Shaped 3D Large Skull Ice Cube Mold Tray
Christian Ounanian
Videos for this product
1:03
Click to play video
Say Goodbye to Boring Ice Cubes!
Dotori Brands
Compare with similar items
This Item  Shaped SHAPED 3D Large Skull Ice Cube Mold Tray, Round Whiskey Ice Mold with Lid for Whiskey Drinkers, Bartenders, Gift Exchanges, Home Bar Enthusiasts and Holiday Gifts | Recommendations  |  |  |  |  | |
| Price | $12.99 | $6.99 | -18% $13.99 List: $16.99 | $40.99 | $8.99 | $12.88 |
| Delivery | Get it as soon as Wednesday, Oct 23 | Get it as soon as Tuesday, Oct 29 | Get it as soon as Wednesday, Oct 23 | — | Get it as soon as Wednesday, Oct 23 | — |
| Customer Ratings | ||||||
| Sold By | Dotori Brands | giteo bedding | JETKONG Life | TINANA | SHONSILIC | Vilei |
| material | Silicone | Silicone | Silicone | Silicone | Silicone | Silicone |
| size | Large | ✗ | 4 Cavity Large | 8.6*5.1*7.6 in | 6.5 inch | — |
| shape | Skull | Skull | Skull | Round | Round | Skull |
| dishwasher safe | ✓ | ✗ | ✓ | ✓ | ✓ | ✓ |
Inspiration from this brand
Some helpful tips for awesome results!
I saw several negative reviews for this mold saying it doesn't work, so I was nervous about giving it a try. But I just loved the idea of having skull shaped ice, so I went for it. I'm SOOO glad I did! The ice is exactly as expected, but there are some tricks to getting it right. Admittedly, I just breezed through the directions (even the ones the company emailed) the first time and my results were less than stellar. Tons of ice between the sections making the skulls not usable...but this was MY fault. After carefully reading the instructions again, these are the steps I followed for my second attempt: 1. Molds had already been washed, but if not, make sure you wash them by hand first. 2. Fill bottom mold up the entire way with either filtered or boiled, distilled water (cooled down). 3. Put the water filled mold in the sink, carefully place the top and let the excess water spill out the sides. 4. Make sure you press the center between the skulls flat so as little ice can form here as possible. 5. The MOST important step is to weigh down the center of the mold (as shown in the photos, I used small lunch ice packs). This allows a very thin or no layer of water between the mold halves. 6. After freezing (I left mine overnight), twist mold back and forth to dislodge ice. If the center has a thin layer of ice, don't worry, it will crack away leaving just the skulls. 7. I ran a bit of water over the skulls to free them. And voila! Super awesome skull ice!!! The pictures don't do them justice, the detail is really crisp! I used filtered fridge water in the pictures.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on October 11, 2018
While you will definitely need a flat open place in your freezer to make these cool cubes (pun intended), they are definitely different than what you normally expect to see in your glass when you have a drink. I went to a place in Johnson City TN where the bartender offered "big ice." That was the inspiration for this purchase, and I'm glad I bought them. These are neat, and practical too. A larger piece of ice then what my refrigerator door delivers, will definitely keep your beverage colder without diluting your drink. With Halloween on the way, it's an appropriate skull shape, too. I will probably use these cubes in the pool room, rather than the dining room. The black molds are made of a tough, durable silicone, that was real easy to clean. To make them, I placed the water filled mold in a tray, before placing it in the freezer drawer in case someone went in there before they had time to freeze. It's possible that they could spill if somebody bumped them, but the two pieces of the mold fit perfectly within themselves to create the distinctive, somewhat detailed shape of ice. This was a good product for the price. Delivery was quick, and the box the 2 molds came in can be reused.
Images in this review
Reviewed in the United States on October 28, 2020
Number of Items: 1Verified Purchase
So easy to use, if you just follow directions
Reviewed in the United States on October 28, 2020
They are a bit smaller (as listed) but fantastic and easy to produce many quickly without hassle. Unfortunately, humans are stupid and instead of following the directions that come with it, people are trying to fill them through the ventilation holes. Don’t do that. If you just do what it says, and fill the bottom tray about 1/3-1/2 way full, then push the top tray down over it, you will get almost perfect little skulls. The secret is finding the perfect spot to fill the bottom tray to. They should put a line, but anyone can figure it out fast. IMPORTANT: do not waste time double boiling water, lol. This is a myth. distilled water does nothing. Cloudy ice is from trapped air via fast freezing. The only way to get clear ice is called “directional freezing” (AJ a Clinebell machine or using an open igloo cooler). Slow directional freezing pushes the trapped air in water to one end of the freezing ice, which you saw or cut off. You are not going to get clear skulls like the photo, no matter what you do, unless you use directional freezing and/or slow freezing or both.Reviewed in the United States on October 28, 2020
Images in this review
Reviewed in the United States on October 30, 2022
Number of Items: 1Verified Purchase
I love using these for spooky season drinks! Let’s face it, I will probably wind up using them all year because I like skulls, but they truly look great in drinks. I added blue butterfly pea powder to water to make blue skull cubes to add to my Empress gin and tonic. I loved the blue and purple tones that came out! I also froze some cold brew coffee to add to an iced coffee drink. Love these over all. Wish they were a little larger and plain ice would come out a little clearer. I never used molds before, so I don’t know how feasible a totally crystal clear ice mold is. They are easy to get out and trays are easy to clean!
Images in this review
Reviewed in the United States on August 12, 2020
Number of Items: 1Verified Purchase
I saw several negative reviews for this mold saying it doesn't work, so I was nervous about giving it a try. But I just loved the idea of having skull shaped ice, so I went for it. I'm SOOO glad I did! The ice is exactly as expected, but there are some tricks to getting it right. Admittedly, I just breezed through the directions (even the ones the company emailed) the first time and my results were less than stellar. Tons of ice between the sections making the skulls not usable...but this was MY fault. After carefully reading the instructions again, these are the steps I followed for my second attempt: 1. Molds had already been washed, but if not, make sure you wash them by hand first. 2. Fill bottom mold up the entire way with either filtered or boiled, distilled water (cooled down). 3. Put the water filled mold in the sink, carefully place the top and let the excess water spill out the sides. 4. Make sure you press the center between the skulls flat so as little ice can form here as possible. 5. The MOST important step is to weigh down the center of the mold (as shown in the photos, I used small lunch ice packs). This allows a very thin or no layer of water between the mold halves. 6. After freezing (I left mine overnight), twist mold back and forth to dislodge ice. If the center has a thin layer of ice, don't worry, it will crack away leaving just the skulls. 7. I ran a bit of water over the skulls to free them. And voila! Super awesome skull ice!!! The pictures don't do them justice, the detail is really crisp! I used filtered fridge water in the pictures.
Images in this review
Top reviews from other countries
rae
Skull Ice Mold Tray: Spooky Fun for Every Drink!
Reviewed in Canada on August 10, 2024Number of Items: 1Verified Purchase
JCK
Clever novelty ice cube mould.
Reviewed in the United Kingdom on January 11, 2024Number of Items: 1Verified Purchase
Marc Polaniok
Funktioniert tatsächlich
Reviewed in Germany on June 15, 2022Number of Items: 1Verified Purchase
Chris C
Perfect molds for skull ice cubes
Reviewed in Canada on April 15, 2024Number of Items: 1Verified Purchase
