Doppelseitige Copper Clad Laminat PCB Leiterplatte 4 x 3 (50)

I've bought several different pcb boards from different sellers on Amazon and this one is the best. They cam well packed. The boards were in good shape. Would recommend this one.

Eine Person fand diese Informationen hilfreich

Liam

Incredible deal, great quality

Bewertet in den USA am29. Juni 2017

This is an absurdly good deal at $0.20 a board! These are actual, high quality FR-4 boards, as opposed to the boards I've ordered from other sellers which claim to be FR-4 but are actually FR-2 bonded paper boards. Even with these problems, those boards were over $0.50 each, and they were only single-sided.
Shipping was fast as well, even though it wasn't prime free two day shipping, the shipping method listed on the invoice was second day.
Definitely going to be purchasing these again, no question.

2 Personen fanden diese Informationen hilfreich

Jesse G

Pretty good

Bewertet in den USA am11. November 2017

They are decent for the price I paid for them but the copper can tend to lift off while soldering if you're not real careful with the heat.

so for hobby use if they are cheap, it's a great deal. If the price goes up too much then you might as well pay the same but get a better product.

2 Personen fanden diese Informationen hilfreich

Amazon Customer

Appear to be genuine fiberglass FR4

Bewertet in den USA am15. Juni 2020

Well packaged in five 10-board bundles. Heavy. I opened one bundle to inspect. The copper was in good shape. Some fibers coming off of the edge of a board appeared to be fiberglass. Decent thickness. Measured with a steel ruler and the size was 3x4" as advertised.

Harold Galloup

Aren't square all of them!

Bewertet in den USA am15. Januar 2017

some of them have one rounded corner. aren't perfectly the same size.

2 Personen fanden diese Informationen hilfreich

John McNelly

The best value in copper clad boards

Bewertet in den USA am21. August 2018

These boards are BEAUTIFUL. Shiny, no scratches, well packaged, and the best bang for your buck! I've used 15 of these already in my CNC machine and I'm quite happy with the results. 0.2mm milling depth works great, although I was even able to use 0.05mm milling depth on some of the flatter ones. I've had great luck with using bCNC to autolevel before each job.

4 Personen fanden diese Informationen hilfreich

Peter Kehagias

Great value, good quality

Bewertet in den USA am28. April 2020

So far these meet all my expectations, at a really good price-point. Definitely ordering more when I run out.

Peter M.

Quality and price

Bewertet in den USA am17. Februar 2021

These far exceeded any expectation I may have had. Excellent value!