Shop top categories that ship internationally
Keine hervorgehobenen Angebote verfügbar
Weitere Informationen

Keine hervorgehobenen Angebote verfügbar

Wir heben Angebote mit der Schaltfläche In den Einkaufswagen hervor, wenn ein Angebot unseren hohen Qualitätsstandards entspricht für:

  • Preis,
  • Lieferoption, und
  • Kundenservice
„Keine hervorgehobenen Angebote verfügbar“ bedeutet, dass derzeit keine Angebote vorhanden sind, die alle diese Erwartungen erfüllen. Wähle Alle Angebote, um verfügbare Angebote zu entdecken.

Ähnliche Artikel Versand nach Österreich
AT
Österreich
Hinzugefügt zu

Es ist ein Fehler aufgetreten.

Es gab einen Fehler beim Abrufen deines Wunschzettels. Versuche es noch einmal.

Es ist ein Fehler aufgetreten.

Liste nicht verfügbar.

Dremel EZ402 EZ Schlossdorn, 3,2 mm Schaft, Drehwerkzeug-Zubehördorn

4,7 4,7 von 5 Sternen 3.481 Sternebewertungen

Silber
Mittel
Marke Dremel
Material Metall
Kompatible Geräte Die Produkte sind Teil des Produkts
Grifftyp Handfestgezogen, angetrieben
Enthaltene Komponenten 1

Info zu diesem Artikel

  • Spanndorne werden verwendet, um verschiedene Zubehörteile zu montieren, die mit Ihrem Dremel Drehwerkzeug verwendet werden können.
  • Das patentierte EZ402 Dremel EZ-Lock-System verfügt über einen einteiligen Dorn, der für den einfachen Austausch von Zubehör entwickelt wurde, wodurch es leicht ist, durch eine Reihe von Materialien von Metall bis Kunststoff zu schneiden.
  • Das einteilige EZ-Lock-Dorn-Design eliminiert die Notwendigkeit einer Schraube, wodurch das Zubehör 6 x schneller gewechselt wird als mit einem Standarddorn.
  • Kompatibel mit allen EZ-Rotationswerkzeugen sollte der EZ402 nur mit EZ-Lock-Zubehör zum Schneiden, Schleifen, Reinigen, Polieren, Schleifen und Schärfen von Drehwerkzeug-Zubehör verwendet werden.
  • Anwendungen: Spannzangen/Sonstiges (brauner Farbcode)
  • Schaftgröße: 6,4 mm
  • 1 Drehzubehör im Lieferumfang enthalten

Du suchst nach bestimmten Informationen?

Kundenrezensionen

4,7 von 5 Sternen
3.481 weltweite Bewertungen

Dieses Produkt bewerten

Sag deine Meinung zu diesem Artikel
Very much satisfied
5 von 5 Sternen
Very much satisfied
I've been using this EZ Lock Mandrel on my recently purchased Dremel 4000 and I'm quite happy with it. The quick release makes it very easy to switch to different cut off wheels etc.I'll definitely recommend this item to any one who is thinking if to buy or not to buy or is it worth it. In my opinion it's worth the buy and I'll definitely be buying this again in the future.The best way in my opinion to add a cut off wheel or any other is to first have it attached to the Dremel tool so it will be easier to just pull down the spring loaded flange and remove or add the cut off wheel. While holding it down just twist the cut off wheel any direction 90 degrees and let go of the flange and it will lock into place for easy work.Keep in mind that if you're changing cut of wheels while working with the tool be sure that it's cool or else you can get burned, using a gloves or a piece of cloth doubled up or rag will help to remove the cut off wheel if it's hot.Here are some pictures using the tool. I cut off a piece of threaded screw and did cut an old padlock to see how it performed, I'm quite satisfied with the EZ402 Lock Mandrel.
Vielen Dank für dein Feedback.
Leider ist ein Fehler aufgetreten.
Leider konnten wir die Rezension nicht laden

Spitzenrezensionen aus USA

  • Bewertet in den USA am2. August 2024
    Farbe: SilberGröße: MittelVerifizierter Kauf
    The perfect accessory for all rotary tools. Makes replacing or changing cutters and sanding accessories a breeze. Quick and secure fit.
  • Bewertet in den USA am8. Juli 2024
    Farbe: SilberGröße: MittelVerifizierter Kauf
    Works great !
  • Bewertet in den USA am14. Oktober 2013
    Farbe: SilberGröße: MittelVerifizierter Kauf
    I just bought a new Dremel after leaving mine behind in one crazy heck of a move. When I bought new heads for it, I realized some of them required the EZ lock mandrel to be used--the best ones did. If you buy a Dremel set with several tools, this may already come with it but my new Dremel did not have it. And really, it's something you'll want.

    This allows you to change out the heads on your Dremel in a snap--no special tools, far less time. And that can be a huge bonus if you are working on something creative, which I do all the time with my Dremel tool. Heck, I use it for everything from cutting spurs grown too long on my rooster (he doesn't feel it, but he sure feels inconvenience in walking when they are too long!), to doing creative cuts in wood, to doing fast trims when putting reclaimed wood up on a wall, and more.

    Quite frankly, I use it quite a bit. And time is money, so in my mind this pays for itself in one day of Dremel use. Not only that, but in my opinion Dremel is moving towards heads that only use this--some of the best ones can't be used without it so it is simply not only a better way of using the Dremel, but for many of us, a must-have.

    Simple. Easy. Saves Time.

    Enough said with that alone.
    19 Personen fanden diese Informationen hilfreich
    Melden
  • Bewertet in den USA am17. August 2017
    Farbe: SilberGröße: MittelVerifizierter Kauf
    The EZ Lock Mandrel works as advertised. It allows for very quick and easy replacement of cutting, sanding and buffing heads, No tools are required to change heads once the mandrel is mounted in the Dremel tool. It is a big improvement over the screw head mandrel which requires a small screw to be removed from the top of the mandrel each time you want to change or replace a head. The only down side is that the mounting bracket which fits the cutting,sanding or buffing head to the mandrel tends to break away from the head too often. I recently completed a project using the EZ Lock Cutting heads designed for plastic to cut a piece of plexiglass to make a 32" round cover for a coffee table. The tool worked brilliantly the edges cleaned up with a light buff from the EZ Lock buffing pads. The problem was that I went through at least 6 cutting heads due to the fact that the metal bracket meant to mount the cutting head to the EZ Lock Mandrel kept separating from the head, rendering the cutting wheel useless. I finally switched back to the traditional mandrel and finished the job without having to change cutting heads. Note that the EZ Lock Cutting Wheels did not wear down and still had plenty of life remaining - they just broke away from the mount. This could have been because I was using them to cut a radius which caused tension on the mount, but I did not force them and they were cutting fine. If you are making straight cuts, and will have to change heads, this tool is worth the investment. Also note, the EZ Lock Mandrel will only work with heads that are designated as EZ Lock. You will not be able to use the EZ Lock Mandrel with other manufacturer's tool heads as you can with the standard mandrel. The only other downside of the EZ Lock line up is the cost. The replacement tool heads are about three times more expensive that their standard mandrel counterparts, but you pay for convenience.
    18 Personen fanden diese Informationen hilfreich
    Melden
  • Bewertet in den USA am1. September 2024
    Farbe: SilberGröße: MittelVerifizierter Kauf
    I am very satisfied with this product, it helps me a lot when working.
  • Bewertet in den USA am21. Dezember 2024
    Farbe: SilberGröße: MittelVerifizierter Kauf
    Another Dremel accessory, works well goes with the easy lock cut off tools and other accessories, well worth the money if you’re a Dremel tool owner buy it
  • Bewertet in den USA am13. August 2024
    Farbe: SilberGröße: MittelVerifizierter Kauf
    This is an absolute necessity if you use your Dremel a lot. Super quick and easy the change cutting wheels with this piece mounted on the tool. I won't work without it .
  • Bewertet in den USA am3. September 2024
    Farbe: SilberGröße: MittelVerifizierter Kauf
    My first mandrel lasted about 40 or 50 cutting disc and I noticed my disk was loose. My mandrel was worn so I bought this one fits tightly if I get that shoes out of the second one I’ll be very happy with it.

Spitzenrezensionen aus anderen Ländern

Alle Rezensionen ins Deutsche übersetzen
  • JD
    5,0 von 5 Sternen Small yet efficient
    Bewertet in Kanada am 20. Oktober 2024
    Farbe: SilberGröße: MittelVerifizierter Kauf
    Easy to use with a dremel blade - stays attached - Quick release and attachment
    I like this adapter a lot
  • Rene Berber
    5,0 von 5 Sternen Otra excelente idea de Dremel
    Bewertet in Mexiko am 12. Mai 2023
    Farbe: SilberGröße: MittelVerifizierter Kauf
    Mi Dremel originalmente trae 3 diferentes mandriles (diametros diferentes), es necesario para usar diferentes accesorios, pero la mayoría de estos últimos son discos y todos utilizan el tamaño más grande.

    Este aditamento reemplaza a esa pieza, siendo más grande y robusto, creo que queda mejor. Además claro que es más fácil instalar los discos.
  • Fabião
    5,0 von 5 Sternen Otimo
    Bewertet in Brasilien am 12. Mai 2023
    Farbe: SilberGröße: MittelVerifizierter Kauf
    Produtos originais sempre confiantes
  • Ronnie
    5,0 von 5 Sternen Great product
    Bewertet in Australien am 23. Dezember 2024
    Farbe: SilberGröße: MittelVerifizierter Kauf
    Does the job
  • 精密天秤
    5,0 von 5 Sternen 満足しています。
    Bewertet in Japan am 4. Oktober 2023
    Farbe: SilberGröße: MittelVerifizierter Kauf
    ブラシやカッターを取り付けて使っています。
    特にカッターの振れが小さくて満足しています。