|Item Weight||13.6 ounces|
|Package Dimensions||6.1 x 5.8 x 3.2 inches|
|Item model number||DRILAX010125|
|Item Package Quantity||1|
Drilax™ 4-7/8" Diamond Drill Bit Hole Saw (Smaller Than 5 ") Ceramic, Porcelain Tiles, Glass, Fish Tanks, Marble, Granite, Quartz Diamond Coated Circular Saw - Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool 4 7/8 Inches in Drilax010125
- Enter your model number to make sure this fits.
- Durable Diamond Drilling Holesaw Tool 4 7/8" - Slightly Smaller Than 5 inches
- Rare Size. Use with standard electric or battery drillers.
- There is no need for a center pilot drill. These tools do not have center pilot drills.
- Do NOT run dry. Diamond Coated Tools will work best if you use water to keep the tools cool.
- Shank size is 3/8" - suitable for all common electric drillers.
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
Compare with similar items
Do NOT Use Dry - Water coolant is recommended
4 7/8" - Rare Size - Slightly Smaller Than 5 inches
This Tool Does NOT Have a Center Pilot Drill
The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.
Drilax tools can drill 1 1/4" in depth.
Shank size is 3/8" - common electric or rechargable drillers can be used.
Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.
Please use protective gear.
Visit Web Site For Instructions
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
Perfectly round hole.Smooth as can be. If you keep it when when drilling, this thing will last forever.
I used a drill press (lowest speed setting), a jig to secure the granite tile, and a continuous stream of water to make each cut. Do that and I doubt you will have any issues with this product.
Saved me hours of frustration.
Well worth the money. I highly recommend.